PerFact ZODBSync

This package provides tools to serialize Zope objects and store them in a file system structure as well as to restore Zope objects from this structure.

Some features require that the file system structure is governed by git as version control system.

Maintainers:

Ján Jockusch [email protected]

Viktor Dick [email protected]

Repository:

git clone https://github.com/perfact/zodbsync.git

Installation

The package should be installed using pip in the same virt-env as zope, p.e.

zope/bin/pip install git+https://github.com/perfact/zodbsync

On PerFact systems, it should automatically be pulled by the requirements.txt of the package perfact-dbutils-zope4 and included there. If installing on an older system, run

sudo -H /opt/zope/zope2.13/bin/pip install git+https://github.com/perfact/zodbsync

On newer PerFact Zope4 installations, install test branch via, e.g. for development/testing purposes

sudo -H /usr/share/perfact/zope4/bin/pip install git+https://github.com/perfact/zodbsync@test --upgrade

Note that executing the tests requires ODBC C headers to be installed. On Debian-like systems, install the package unixodbc-dev.

Configuration

Use the config.py as a starting point for your configuration. At the moment, it is not automatically installed. The canonical path for the configuration is /etc/perfact/modsync/zodb.py, so if you do not want to supply the path to the configuration when calling the scripts, copy the configuration file there.

The most important settings are:

conf_path or wsgi_conf_path

Set conf_path or wsgi_conf_path to the zope.conf of your Zope instance. If it is a standalone instance exclusively accessing its ZODB, it must be powered down if used by zodbsync. So usually it is advisable that it is configured to connect to a ZEO server.

The two options are present due to a no longer relevant difference between ZServer and WSGI instance handling and can now be used interchangeably.

base_dir

Inside this folder (actually, in a subfolder named __root__), the serialized objects are placed.

manager_user

The name of a user that must be defined in the top-level UserFolder (acl_users) and which has Manager permissions. Transactions that are used to upload objects to the ZODB are done by this user.

default_owner

This user is considered to be the default owner of objects if no other information is stored in the object.

force_default_owner

Can be combined with default_owner to enforce a specific owner for objects in the ZODB.

datafs_path

The path to the location of the Data.fs file. This is needed for zodbsync watch.

run_after_playback

Path to a script that is executed after a successful (non-recursive) playback, including indirect calls from reset or pick. If the script exists, it is called and fed the list of changed objects in a JSON format.

Usage

The executable zodbsync provides several subcommands

zodbsync record

The record subcommand is used to record objects from the ZODB to the file system.

Each object is mapped to a folder that contains at least the file __meta__ which holds the meta data of the object (properties, permissions etc.). If the object contains other objects (like Folders), they are represented as subfolders. If the object has some sort of source (like Page Templates, DTML Methods etc.), it is stored in an additional file. The filename suffix is taken from the object type and possibly content type, while the base is either __source__ or __source-utf8__

Only a specific list of object types is supported by zodbsync. Objects whose type is not yet supported are created with a minimal __meta__ file, containing only the title, type and an unsupported marker.

An additional option --commit allows to create a git commit after the recording, sending a summary mail containing all changed files to an address specified in the configuration. This can be used as automated reminder fallback if changes are not commited timely.

If zodbsync record is called with the --lasttxn option, it tries to do an incremental recording, reading all transactions that occured since the last call (the transaction ID is stored in a file __last_txn__ in the repository). The paths to be recorded are extracted from the transaction note, which works well if editing an object in the management interface of Zope, but not necessarily if an object is changed from within a script, if it is transferred by the ZSyncer or if objects are cut and pasted (in the latter case, only the target of the move operation is recognized).

zodbsync watch

This subcommand starts a process that aims to bypass the shortcomings of zodbsync record --lasttxn. The process stays alive and builds an object tree of all objects in the ZODB. Each time it wakes up, it scans for new transactions, opens the Data.FS directly (in read-only mode) to obtain all affected object IDs, updates its object tree and uses it to obtain the physical paths of all affected objects. After finishing, it sleeps for 10 seconds before waking again. This should provide an almost live recording that does not miss any changes.

zodbsync playback

The opposite operation to record is playback, which is able to create and modify objects in the ZODB from a file system structure as it is created by record.

By default, playback recurses into the subtree below a given path, removing any superfluous objects and updating existing objects so they match their file system representation. An exception are objects that are marked as unsupported, which are ignored if found in the ZODB. If only a given object itself should be updated (properties, security settings etc.), --no-recurse can be used.

zodbsync exec

This command requires the base directory to be a git repository and provides a wrapper for several git commands. It executes the given command, reads the objects changed between the old and new HEAD and plays them back. Any unstaged changes are stashed away and restored afterwards. The operation is aborted and rolled back if it results in a broken state (an interrupted merge, rebase, cherry-pick etc.) or if there is an overlap between the unstaged and the changed files.

This allows commands like the following:

zodbsync exec "git cherry-pick COMMIT"
zodbsync exec "git checkout otherbranch"
zodbsync exec "git reset --hard COMMIT"
zodbsync exec "git revert COMMIT"

zodbsync reset

Shorthand for zodbsync exec "git reset --hard COMMIT"

zodbsync checkout

Wrapper for git checkout with some of its functionality.

zodbsync pick

As a special case of exec, this wraps git cherry-pick and takes git commits to be applied as arguments. This is useful if some development has been done in a branch or on a remote system that has to be deployed to the current system. It then becomes possible to do something like

git fetch origin
zodbsync pick origin/master

to pull the latest commit, apply it to the current repository and upload the affected paths to the Data.FS. It can also be used to pick multiple commits. Its argument --grep allows, for example, to pull all commits where the commit message starts with T12345:

zodbsync pick --grep="^T12345" source/master

Commit ranges in the form of COMMIT1..COMMIT2 can also be picked, but be aware that there is no check that the commit range is actually a straight forward succession - internally, git log is used and therefore any commits that are reachable from COMMIT2 but not from COMMIT1 are picked. In practice, choosing commits that are not directly connected will result in some commit not being able to be picked due to conflicts.

zodbsync upload (DEPRECATED)

upload expects the base directory to be a git repository and provides a tool to upload JS and CSS libraries into the Data.fs. This is achieved by converting these files into files and directories understood by playback and placing them in the specified directory inside of base_dir.

Example to upload bootstrap:

zodbsync upload /tmp/bootstrap lib/bootstrap

zodbsync with-lock

If some combination of git and zodbsync operations is not yet covered by a wrapper subcommand, it is possible to use zodbsync with-lock to execute a series of commands while still making sure that no other similar operation interferes. Any zodbsync command used as part of this must then use the option --no-lock. For example:

zodbsync with-lock "git rebase origin/main && zodbsync --no-lock playback /"

Although this particular example can now be better achieved with zodbsync exec.

zodbsync reformat

With version 4.3.2, the formatting of meta files was changed to become more diff-friendly, placing, for example, lists of roles for a specific permission onto one line each. When transferring commits from a system that used the old recording to one that uses the new one, zodbsync reformat can be used to rewrite commits of the old to the new version.

Use a separate repository clone, check out the starting point and pick the commits that used the old formatting on top of it. Executing reformat will add a commit that reformats the complete repository after the starting point, followed by rewritten commits that correspond to the original ones, but using the new formatting. Finally, pick these commits onto the target system. Detailed steps:

• find the commit ID of the first commit you want to reformat, this ID will be referred to as START

• from the source branch or system, check out the commit before START and create a work branch

  • git checkout START~
  • git checkout -b <work-branch>

• pick the commits to be reformatted into the work branch

  • git cherry-pick -Xno-renames <commit-ids ...>

• run reformat: this will create a commit between START~ and START containing the reformatting of the entire repo from old to new format and applies the following commits as if they had been committed using the new format

  • zodbsync reformat START~

• if the project also contains commits made after the format change, cherry-pick them into the work branch now

• push the work branch to the target system and zodbsync pick the commits (except the zodbsync reformat commit)

Hint: This requires git in version 2.22 or above.

Compatibility

This package replaces similar functionality that was previously found in python-perfact and perfact-dbutils-zope2. For backwards compatibility, those packages were changed so the corresponding calls try to import perfact.zodbsync and use the functionality there, falling back to the previous implementation if that fails. Corresponding deprecation warnings are included.

Previous versions contained the scripts perfact-zoperecord and perfact-zopeplayback instead of zodbsync. For compatibility with systems automatically calling perfact-zoperecord, it is still included but only providing the bare functionality:

• perfact-zoperecord (corresponds to zodbsync record --commit /)
• perfact-zoperecord --lasttxn (corresponds to zodbsync record --lasttxn, but including a call to perfact-dbrecord if a databases key is defined in the configuration)

Caveats

Zope allows External Methods to be present in the ZODB even if the corresponding modules are no longer present as extensions. It does not, however, allow saving such an object. This gives errors if object trees containing broken External Methods are recorded and played back. The same holds for Z SQL Methods which have class_name and class_file set to a no longer existing extension.

To Do / Roadmap

• Specifying a path to a python script that is executed after playback inside the same transaction will allow to store database changes in a connected relational (SQL) database inside ZODB using Z SQL Methods and have them executed as part of the same deployment step.