docs: add infra section intro

docs/gno-infrastructure/gno-infrastructure.md

@@ -0,0 +1,9 @@
+---
+id: gno-infrastructure
+---
+
+# Gno Infrastructure
+
+Welcome to the **Gno Infrastructure** section. This section is meant for users
+wanting to learn how to run their own Gno node, set up their own faucet, run
+an indexer service, and more.

docs/getting-started/local-setup/premining-balances.md → docs/gno-infrastructure/premining-balances.md

@@ -12,10 +12,11 @@ Additionally, you will understand how to query the account balance after you pre
 Premining balance is the process of making sure some accounts (addresses) have specific funds when the chain initially
 launches. In the context of local chain deployments, premine balances are used to ensure the user accounts (developers)
 have ample funds to interact with the chain and facilitate contract deployments.
-  
+
 ## Prerequisites
 
-- **`gnoland` and `gnokey` set up. Reference the [Installation](local-setup.md#3-installing-other-gno-tools) guide
+- **`gnoland` set up. Reference the [Setting up a local chain](setting-up-a-local-chain.md#installation) guide for steps**
+- **`gnokey` set up. Reference the [Installation](../getting-started/local-setup/installation.md#2-installing-the-required-tools-) guide
   for steps**
 
 ## 1. Clean chain data
@@ -51,56 +52,37 @@ An example of how this looks like in the initial `genesis.json` file after the c
       "g127jydsh6cms3lrtdenydxsckh23a8d6emqcvfa=1000000000000ugnot"
     ],
 ``` 
-
 The `genesis_balances.txt` file is located at `./gno.land/genesis/genesis_balances.txt`.
-
 To add a new entry to the premine table, simply append a line to the end of the file:
-
 ```bash
 g1qpymzwx4l4cy6cerdyajp9ksvjsf20rk5y9rtt=10000000000ugnot # My address
 ```
-
 Replace `g1qpymzwx4l4cy6cerdyajp9ksvjsf20rk5y9rtt` with the address you want balance on, and `10000000000ugnot` with the
 desired `ugnot` balance.
-
 ## 3. Start the local chain
-
 Now that our address and the desired premine balance are located in the `genesis_balances.txt` file, we can start the
 local Gno node.
-
 To run the local Gno node, make sure you are in the `gno.land` sub-folder, and run the appropriate make command:
-
 ```bash
 cd gno.land
 gnoland start
 ```
-
 This command will initialize the Gno node, generate the `genesis.json` with our newly added premine information, and
 start the chain.
-
-![gnoland start](../../assets/getting-started/local-setup/setting-up-funds/gnoland-start.gif)
-
+![gnoland start](../assets/getting-started/local-setup/setting-up-funds/gnoland-start.gif)
 ## 3. Check the account balance
-
 To check the balance of any account (or the account we just premined), we can use the following ABCI query:
-
 ```bash
 gnokey query --remote localhost:26657 bank/balances/g1qpymzwx4l4cy6cerdyajp9ksvjsf20rk5y9rtt
 ```
-
 Let's break down this command:
-
 - **`--remote`** - the JSON-RPC URL of the running Gno node. In the case of a local deployment, the default value
   is `localhost:26657`
 - **`bank/balances/g1qpymzwx4l4cy6cerdyajp9ksvjsf20rk5y9rtt`** - the ABCI query targets the `bank` module to find
   the `balances` for address `g1qpymzwx4l4cy6cerdyajp9ksvjsf20rk5y9rtt`. Replace the address with your desired address
-
-![gnokey query](../../assets/getting-started/local-setup/setting-up-funds/gnokey-query.gif)
-
+  ![gnokey query](../assets/getting-started/local-setup/setting-up-funds/gnokey-query.gif)
 ## Conclusion
-
 That's it 🎉
-
 You have successfully premined a native currency balance on a locally-running Gno chain!
 Additionally, you have also learned how to query the native currency balance for an address, using built-in ABCI queries
-and the `gnokey` tool.
+and the `gnokey` tool.

docs/getting-started/local-setup/setting-up-a-local-chain.md → docs/gno-infrastructure/setting-up-a-local-chain.md

@@ -10,8 +10,58 @@ In this tutorial, you will learn how to start a local Gno node (and chain!).
 Additionally, you will see the different options you can use to make your Gno instance unique.
 
 ## Prerequisites
+- **Git**
+- **`make` (for running Makefiles)**
+- **Go 1.21+**
+- **Go Environment Setup**: Ensure you have Go set up as outlined in the [Go official installation documentation](https://go.dev/doc/install) for your environment
 
-- [`gnoland` installed](local-setup.md#3-installing-other-gno-tools).
+## Installation
+
+To install the `gnoland` binary, clone the Gno monorepo:
+
+```bash
+git clone https://github.com/gnolang/gno.git
+```
+
+After cloning the repo, go into the `gno.land/` folder, and use the existing
+Makefile to install the `gnoland` binary:
+
+```bash
+cd gno.land
+make install.gnoland
+```
+
+To verify that you've installed the binary properly and that you are able to use
+it, run the `gnoland` command:
+
+```bash
+gnoland --help
+```
+
+If everything was successful, you should get the following output:
+
+```bash
+❯ gnoland
+USAGE
+  <subcommand> [flags] [<arg>...]
+
+starts the gnoland blockchain node.
+
+SUBCOMMANDS
+  start    run the full node
+  secrets  gno secrets manipulation suite
+  config   gno config manipulation suite
+  genesis  gno genesis manipulation suite
+```
+
+If you do not wish to install the binary globally, you can build and run it
+with the following command from the `gno.land/` folder:
+
+```bash
+make build.gnoland
+```
+
+And finally, run it with `./build gnoland`.
 
 ## Starting a local node (lazy init)
 
@@ -25,7 +75,7 @@ gnoland start --lazy
 The command will trigger a chain initialization process (if you haven't run the node before), and start the Gno node,
 which is ready to accept transactions and interact with other Gno nodes.
 
-![gnoland start](../../assets/getting-started/local-setup/setting-up-a-local-chain/gnoland-start.gif)
+![gnoland start](../assets/getting-started/local-setup/setting-up-a-local-chain/gnoland-start.gif)
 
 :::info Lazy init
 
@@ -271,7 +321,7 @@ That's it! 🎉
 
 Your new Gno node (chain) should be up and running:
 
-![gnoland start](../../assets/getting-started/local-setup/setting-up-a-local-chain/gnoland-start-manual.gif)
+![gnoland start](../assets/getting-started/local-setup/setting-up-a-local-chain/gnoland-start-manual.gif)
 
 ## Chain runtime options
 

docs/gno-tooling/cli/faucet/faucet.md

@@ -8,7 +8,7 @@ id: running-a-faucet
 
 In this tutorial, we will cover how to run a local native currency faucet that works seamlessly with a Gno node.
 Using the faucet, any address can get a hold of native currency funds in case they
-haven't [premined a balance beforehand](../../../getting-started/local-setup/premining-balances.md).
+haven't [premined a balance beforehand](../../../gno-infrastructure/premining-balances.md).
 
 ## Prerequisites
 
@@ -19,14 +19,14 @@ haven't [premined a balance beforehand](../../../getting-started/local-setup/pre
 
 The Gno faucet works by designating a single address as a faucet address that will distribute funds.
 
-Ensure the faucet account will have enough funds by [premining its balance](../../../getting-started/local-setup/premining-balances.md) to a high value.
+Ensure the faucet account will have enough funds by [premining its balance](../../../gno-infrastructure/premining-balances.md) to a high value.
 In case you do not have an existing address added to `gnokey`, you can consult
 the [Working with Key Pairs](../../../getting-started/local-setup/working-with-key-pairs.md) guide.
 
 ## 2. Start the local chain
 
 After ensuring the faucet address will have enough funds in the premine, we
-can [run the local blockchain node](../../../getting-started/local-setup/setting-up-a-local-chain.md).
+can [run the local blockchain node](../../../gno-infrastructure/setting-up-a-local-chain.md).
 Navigate to the `gno.land` sub-folder and run the appropriate make command:
 
 ```bash