_____
| ___|__ _ __ ___ _ __ ___ __ _ _ __
| |_ / _ \| '__/ _ \ '_ ` _ \ / _` | '_ \
| _| (_) | | | __/ | | | | | (_| | | | |
|_|__\___/|_| \___|_| |_| |_|\__,_|_| |_|
| _ \(_)___ ___ _____ _____ _ __ _ _
| | | | / __|/ __/ _ \ \ / / _ \ '__| | | |
| |_| | \__ \ (_| (_) \ V / __/ | | |_| |
|____/|_|___/\___\___/ \_/ \___|_| \__, |
|___/
This is a small redhat-based image that boots via PXE into memory, initializes all network interfaces using NetworkManager and spawns small script called "discovery-register" via systemd. This script determines foreman URL either via DNS SRV or via kernel command line and uploads facts via Foreman Discovery plugin API.
The image has foreman-proxy installed with BMC API configured to "shell" provider. Upon request of Foreman, it reboots the node via /usr/bin/reboot command. To initiate the restart, use the following command:
curl -3 -H "Accept:application/json" -H "Content-Length:0" -k -X PUT \
http://192.168.100.100:8443/bmc/ignored/chassis/power/cycle
This README describes bare minimum steps to PXE-boot discovery image. The full installation and setup is described on the foreman_discovery plugin site: http://theforeman.org/plugins/foreman_discovery/
To extract the tarball into the correct directory you can use this command:
wget http://downloads.theforeman.org/discovery/releases/X.X/fdi-image-X.X.X.tar \
-O - | tar x --overwrite -C /var/lib/tftpboot/boot
Integrate it via the PXELinux templates in the Foreman application.
LABEL discovery
MENU LABEL Foreman Discovery Image
MENU DEFAULT
KERNEL boot/fdi-image/vmlinuz0
APPEND initrd=boot/fdi-image/initrd0.img rootflags=loop root=live:/fdi.iso rootfstype=auto ro rd.live.image rd.debug=1 acpi=force rd.luks=0 rd.md=0 rd.dm=0 rd.lvm=0 rd.bootif=0 rd.neednet=0 nomodeset proxy.url=http://YOURPROXY proxy.type=proxy
IPAPPEND 2
Make sure the APPEND statement is on single line.
You can also use the image standalone (without TFTP under Foreman's control). In this case, edit your pxelinux.cfg/default file directly and make sure the foreman.url points correctly.
By default the instance only initializes default interface (the one it was booted from) via DHCP. If you want to initialize all network interfaces, provide fdi.initnet=all option on the kernel command line. Peer DNS and routes are always acquired only from the primary interface and ignored for secondary (PEERDNS, PEERROUTES, DEFROUTE). Network cards connected to same networks can cause troubles due to ARP filtering.
Only IPv4 is supported at the moment, IPv6 is not initialized.
Discovery image has many features and configuration options. For more, visit http://theforeman.org/plugins/foreman_discovery/
Install the required packages:
$ sudo yum install livecd-tools pykickstart
To prepare CentOS 7 kickstart do:
$ ./build-livecd fdi-centos7.ks
To prepare Fedora 19 kickstart do:
$ ./build-livecd fdi-fedora19.ks
To build the image (make sure you have at least 1 GB free space in /tmp):
$ sudo ./build-livecd-root
Copy the resulting tarball to the TFTP boot directory:
$ tar xvf fdi-image-*.tar -C /var/lib/tftpboot/boot
And visit https://github.com/theforeman/foreman_discovery for more information about how to configure Foreman and how to use the plugin.
The image is built in /tmp directory because in most modern distributions this is mapped to memory. This is intentional, so make sure you have enough RAM or you can experience some swapping. Alternatively, change the temp directory in the scripts.
It is possible to modify SYSLINUX kernel command line by changing livecd-creator code in /usr/lib/python2.7/site-packages/imgcreate/live.py file. This workarounds missing input options for additional kernel command line elements and can be used for testing the ISO with special kernel command line options multiple times.
Some extra facts are reported in addition to the standard ones reported by Facter:
FACTERLIB=/usr/share/fdi/facts/ facter | grep discovery
discovery_bootif => 52:54:00:94:9e:52
discovery_bootip => 192.168.122.51
discovery_bootif - MAC of the interface it was booted from discovery_bootip - IP of the interface it was booted from
First of all make sure your server (or VM) has more than 500 MB of memory because less memory can lead to various random kernel panic errors as the image needs to be extracted in-place (150 MB * 2).
The first virtual console is reserved for logs, all systemd logging is shown there. Particulary useful system logs are tagged with:
- discovery-register - initial facts upload
- foreman-discovery - facts refresh, reboot remote commands
- nm-prepare - boot script which pre-configures NetworkManager
- NetworkManager - networking information
The root account and ssh access are disabled by default, but you can enable ssh and set root password using the following kernel command line options:
fdi.ssh=1 fdi.rootpw=redhat
You can use tty2 console (or higher) to login as well.
To debug booting issues when the system is terminated in early stage of
boot, use systemd.confirm_spawn=true options to interactively start one
service after another. Anothe option rd.debug=1 option makes sure shell
will be spawned on fatal Dracut errors.
If the system is halted immediately during boot sequence, this can be caused by corrupt image. Check the downloaded image using sha256sum. If the problem persist, make sure rd.live.check kernel option is NOT present. Beware that this looks like there are transmission errors of the init RAM disk and you may have unexpected behavior. PXE is unreliable protocol, server and TFTP must be on the same LAN.
This repostirory is downstream friendly for koji. The generated fdi-image.ks kickstart file is self-containing. First of all, run the initial script and provide empty base kickstart without any repositories (they will be added via koji:
$ ./build-livecd fdi-empty.ks
Then simply build the image from kickstart called fdi-image.ks:
koji spin-livecd \
fdi-image-rhel_7_0 \
$(cat root/usr/share/fdi/VERSION) \
--release $(cat root/usr/share/fdi/RELEASE) \
--repo=http://my.repo/1 \
--scratch \
my-tag-image
x86_64 \
fdi-image.ks
Then extract the kernel and initial RAM disk:
mv fdi-image-rhel_7_0-1.9.90-20141022.1.iso fdi.iso
livecd-iso-to-pxeboot fdi.iso
Please follow our (generic contributing guidelines for Foreman)[http://theforeman.org/contribute.html#SubmitPatches]. Make sure you create (an issue)[http://projects.theforeman.org/projects/discovery/issues/new] and select "Image" Category.
vim:tw=75