atsam: Enable TCM and cache for atsame70

Signed-off-by: Luke Vuksta <[email protected]>

src/atsam/Kconfig

@@ -70,6 +70,7 @@ config CLOCK_FREQ
 
 config FLASH_SIZE
     hex
+    default 0x20000 if MACH_SAME70
     default 0x80000
 
 config FLASH_BOOT_ADDRESS
@@ -84,18 +85,33 @@ config RAM_START
 config RAM_SIZE
     hex
     default 0x18000 if MACH_SAM3X
-    default 0x20000 if MACH_SAM4
-    default 0x40000 if MACH_SAME70
+    default 0x20000 if MACH_SAM4 || MACH_SAME70
 
 config STACK_SIZE
     int
     default 512
 
 config FLASH_APPLICATION_ADDRESS
     hex
-    default 0x400000 if MACH_SAM4 || MACH_SAME70
+    default 0x0 if MACH_SAME70
+    default 0x400000 if MACH_SAM4
     default 0x80000
 
+config ARMCM_ITCM_FLASH_MIRROR_START
+    depends on MACH_SAME70
+    hex
+    default 0x400000
+
+config ARMCM_DTCM_START
+    depends on MACH_SAME70
+    hex
+    default 0x20000000
+
+config ARMCM_DTCM_SIZE
+    depends on MACH_SAME70
+    hex
+    default 0x20000
+
 choice
     prompt "Communication interface"
     config ATSAM_USB

src/atsam/Makefile

@@ -20,9 +20,10 @@ CFLAGS-$(CONFIG_MACH_SAM4E) += -Ilib/sam4e/include
 CFLAGS-$(CONFIG_MACH_SAME70) += -Ilib/same70b/include
 CFLAGS += $(CFLAGS-y) -D__$(MCU)__ -mthumb -Ilib/cmsis-core -Ilib/fast-hash
 
-CFLAGS_klipper.elf += -nostdlib -lgcc -lc_nano
-CFLAGS_klipper.elf += -T $(OUT)src/generic/armcm_link.ld
-$(OUT)klipper.elf: $(OUT)src/generic/armcm_link.ld
+samlink-y := $(OUT)src/generic/armcm_link.ld
+samlink-$(CONFIG_MACH_SAME70) := $(OUT)src/atsam/same70_link.ld
+CFLAGS_klipper.elf += -nostdlib -lgcc -lc_nano -T $(samlink-y)
+$(OUT)klipper.elf: $(samlink-y)
 
 # Add source files
 src-y += atsam/main.c atsam/gpio.c atsam/i2c.c atsam/spi.c

src/atsam/fdcan.c

@@ -71,8 +71,8 @@ struct fdcan_msg_ram {
     struct fdcan_fifo TXFIFO[3];
 };
 
-// Message ram is in regular memory
-static struct fdcan_msg_ram MSG_RAM;
+// Message ram is in DTCM - locate it there to avoid cache.
+static struct fdcan_msg_ram MSG_RAM __section(".dtcm.bss");
 
 
 /****************************************************************

src/atsam/same70_link.lds.S

@@ -0,0 +1,81 @@
+// Generic ARM Cortex-M linker script
+//
+// Copyright (C) 2019-2024  Kevin O'Connor <[email protected]>
+// Copyright (C) 2024  Luke Vuksta <[email protected]>
+//
+// This file may be distributed under the terms of the GNU GPLv3 license.
+
+#include "autoconf.h" // CONFIG_FLASH_APPLICATION_ADDRESS
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+
+MEMORY
+{
+  rom (rx) : ORIGIN = CONFIG_FLASH_APPLICATION_ADDRESS , LENGTH = CONFIG_FLASH_SIZE
+  ram (rwx) : ORIGIN = CONFIG_RAM_START , LENGTH = CONFIG_RAM_SIZE
+  dtcm (rw) : ORIGIN = CONFIG_ARMCM_DTCM_START , LENGTH = CONFIG_ARMCM_DTCM_SIZE
+}
+
+SECTIONS
+{
+    .text : AT (CONFIG_ARMCM_ITCM_FLASH_MIRROR_START) {
+        . = ALIGN(4);
+        _text_vectortable_start = .;
+        KEEP(*(.vector_table))
+        _text_vectortable_end = .;
+        *(.text .text.*)
+        *(.ramfunc .ramfunc.*)
+        *(.rodata .rodata*)
+    } > rom
+
+    _text_size = SIZEOF (.text);
+    . = CONFIG_ARMCM_ITCM_FLASH_MIRROR_START + _text_size;
+    . = ALIGN(4);
+    _data_flash = .;
+
+    .data : AT (_data_flash)
+    {
+        . = ALIGN(4);
+        _data_start = .;
+        *(.data .data.*)
+        . = ALIGN(4);
+        _data_end = .;
+    } > ram
+
+    .bss (NOLOAD) :
+    {
+        . = ALIGN(4);
+        _bss_start = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _bss_end = .;
+    } > ram
+
+    _stack_start = CONFIG_RAM_START + CONFIG_RAM_SIZE - CONFIG_STACK_SIZE ;
+    .stack _stack_start (NOLOAD) :
+    {
+        . = . + CONFIG_STACK_SIZE;
+        _stack_end = .;
+    } > ram
+
+    .dtcm_bss (NOLOAD) :
+    {
+        . = ALIGN(4);
+        _dtcm_bss_start = .;
+        *(.dtcm.bss)
+        . = ALIGN(4);
+        _dtcm_bss_end = .;
+    } > dtcm
+
+    /DISCARD/ : {
+        // The .init/.fini sections are used by __libc_init_array(), but
+        // that isn't needed so no need to include them in the binary.
+        *(.init)
+        *(.fini)
+        // Don't include exception tables
+        *(.ARM.extab)
+        *(.ARM.exidx)
+    }
+}

src/atsam/same70_sysinit.c

@@ -1,5 +1,6 @@
 // This code is from lib/sam4e/gcc/system_sam4e.c and modified for the SAM E70
 
+#include <string.h> // memset
 #include "internal.h"
 
 /* Clock Settings (300MHz) */
@@ -9,13 +10,17 @@
                              | CKGR_PLLAR_PLLACOUNT(0x3fU)              \
                              | CKGR_PLLAR_DIVA_BYPASS)
 #define SYS_BOARD_MCKR      (PMC_MCKR_MDIV_PCK_DIV2 | PMC_MCKR_CSS_PLLA_CLK)
+#define RST_PARAMS ((0xA5 << RSTC_CR_KEY_Pos) | RSTC_CR_PROCRST)
+#define GPNVM_TCM_MASK ((1 << 7) | (1 << 8))
 
 /* Key to unlock MOR register */
 #define SYS_CKGR_MOR_KEY_VALUE CKGR_MOR_KEY(0x37)
 
-uint32_t SystemCoreClock = CHIP_FREQ_MAINCK_RC_12MHZ;
+extern uint32_t _text_size;
+extern uint32_t _dtcm_bss_start, _dtcm_bss_end;
 
-void SystemInit( void )
+void
+SystemInit( void )
 {
     /* Set FWS according to SYS_BOARD_MCKR configuration */
     EFC->EEFC_FMR = EEFC_FMR_FWS(6) | EEFC_FMR_CLOE;
@@ -66,12 +71,84 @@ void SystemInit( void )
     {
     }
 
-    SystemCoreClock = CHIP_FREQ_CPU_MAX;
-
-    // Configure PCK6 for TC use
+    /* Configure PCK6 for TC use */
     PMC->PMC_PCK[6] = PMC_PCK_CSS_MCK | PMC_PCK_PRES(2);
     while ( !(PMC->PMC_SR & PMC_SR_PCKRDY6) )
     {
     }
     PMC->PMC_SCER |= PMC_SCER_PCK6;
+
+    /* Check Tightly Coupled Memory (TCM) bits. */
+    EFC->EEFC_FCR = (EEFC_FCR_FKEY_PASSWD | EEFC_FCR_FCMD_GGPB);
+    while ((EFC->EEFC_FSR & EEFC_FSR_FRDY) == 0)
+        ;
+    if ((EFC->EEFC_FRR & GPNVM_TCM_MASK) != GPNVM_TCM_MASK)
+    {
+        /* Configure TCM sizes to 128KiB (set GPNVM7 and GPNVM8). */
+        EFC->EEFC_FCR = (EEFC_FCR_FKEY_PASSWD | EEFC_FCR_FCMD_SGPB
+                        | EEFC_FCR_FARG(7));
+        while ((EFC->EEFC_FSR & EEFC_FSR_FRDY) == 0)
+            ;
+        EFC->EEFC_FCR = (EEFC_FCR_FKEY_PASSWD| EEFC_FCR_FCMD_SGPB
+                        | EEFC_FCR_FARG(8));
+        while ((EFC->EEFC_FSR & EEFC_FSR_FRDY) == 0)
+            ;
+        /* Reboot required, but bits are set now and we will not
+         * return down this path. */
+        __DSB();
+        __ISB();
+        RSTC->RSTC_CR = RST_PARAMS;
+        for (;;)
+            ;
+    }
+
+    /* Clear Data Tightly Coupled Memory (DTCM) bss segment - this has to happen
+     *  after we check that the DTCM is enabled. */
+    memset(&_dtcm_bss_start, 0, (&_dtcm_bss_end - &_dtcm_bss_start) * 4);
+
+    /* DMA copy flash to Instruction Tightly Coupled Memory (ITCM). Just use
+     *  channel 0 since we have not done anything yet. */
+    enable_pclock(ID_XDMAC);
+    /* Clear pending interrupts. */
+    (void)REG_XDMAC_CIS0;
+    REG_XDMAC_CSA0 = CONFIG_ARMCM_ITCM_FLASH_MIRROR_START;
+    REG_XDMAC_CDA0 = CONFIG_FLASH_APPLICATION_ADDRESS;
+    REG_XDMAC_CUBC0 = XDMAC_CUBC_UBLEN((int)&_text_size);
+
+    REG_XDMAC_CC0 =
+        XDMAC_CC_TYPE_MEM_TRAN | XDMAC_CC_MBSIZE_SINGLE |
+        XDMAC_CC_CSIZE_CHK_1 | XDMAC_CC_DWIDTH_WORD |
+        XDMAC_CC_SAM_INCREMENTED_AM | XDMAC_CC_DAM_INCREMENTED_AM |
+        XDMAC_CC_SIF_AHB_IF1 | XDMAC_CC_DIF_AHB_IF0;
+
+    REG_XDMAC_CNDA0 = 0;
+    REG_XDMAC_CNDC0 = 0;
+    REG_XDMAC_CBC0 = 0;
+    REG_XDMAC_CDS_MSP0 = 0;
+    REG_XDMAC_CSUS0 = 0;
+    REG_XDMAC_CDUS0 = 0;
+
+    REG_XDMAC_CIE0 = XDMAC_CIE_BIE;
+
+    __DSB();
+    __ISB();
+    XDMAC->XDMAC_GE = XDMAC_GE_EN0;
+    while ( XDMAC->XDMAC_GS & XDMAC_GS_ST0 )
+        ;
+
+    while ( !(REG_XDMAC_CIS0 & XDMAC_CIS_BIS) )
+        ;
+
+    /* Enable ITCM. DTCM is enabled by default. */
+    __DSB();
+    __ISB();
+    SCB->ITCMCR = (SCB_ITCMCR_EN_Msk | SCB_ITCMCR_RMW_Msk
+                    | SCB_ITCMCR_RETEN_Msk);
+    __DSB();
+    __ISB();
+
+    /* Use data cache rather than DTCM for two reasons:
+     *  1. It is hard to flash this device with GPNVM bits enabled.
+     *  2. It is about as fast. */
+    SCB_EnableDCache();
 }