Print Service

Print service for [https://map.geo.admin.ch], based on MapFish Print v2 It uses the standard mapfish print protocol of MapFish Print v2, extended for multipages print.

AWS CodeBuild Status

Architecture

Elastic Load Balancer

//vpc-lb-print-(dev|int|prod).intra.bgdi.ch

Elastic File System

A r/w EFS for application, mounted in docker container on /var/local/print

fs-080aa4c1.efs.eu-west-1.amazonaws.com://print/(dev|int|prod)

Docker containers

nginx, responding on port 8009, dispatching requests on various backend
flask application, on port 8010, to split the multipages requests into single ones, and then merge them into a single pdf document
tomcat, with a single application service-print-main responding on 8011

  Nginx:8009               Flask (wsgi) :8010                Tomcat 8011                  EFS  
                                                                                                  
+----------------+         +-------------+                                          +-----------+
|                |         |             |          write assembled pages           |           |
|                |         | split into  |----------------------------------------->|           |
| /printmulti    | ------> | single page |        get single pages                  |           |
| /printprogress |         |   print     |<---------------------------------------- |           |
| /printcancel   |         |             |                                          |           |
|                |         |             | prints    +-------------------+          |           |
|                |         |             |-----------|                   | -------> |           |
|                |         |             | single    |                   |          |           |
|                |         +-------------+ page      |/service-print-main|          |           |
|                |                                   |                   |          |           |
|                |                                   |                   |          |           |
|                |                                   |                   |          |           |
|                |     single page print             |                   |  writes  |           |
|  /print        |-----------------------------------|                   |--------> |           |
|                |                                   |                   |          |           |
|                |        -                          |                   |          |           |
|                |                                   |                   |          |           |
|                |                                   |                   |          |           |
|                |                                   |                   |          |           |
| /(.*).pdf      |                                   +-------------------+          |           |
|                | <--------------------------------------------------------------  |           |
+----------------+                         retrieve PDFs                            |           |
                                                                                    |           |
                                                                                    +-----------+

Endpoint

Hostnames

print.geo.admin.ch and service-print.(dev|int|prod).bgdi.ch

ELB

 http://vpc-lb-print-(dev|int|prod).intra.bgdi.ch:8009

URI

Apache/Nginx                            Flask/WSGI                               Tomcat

GET  /print/info.json                                               GET /service-print-main/pdf/info.json

POST /print/create.json                                             POST /service-print-main/pdf/create.json

POST /printmulti/create.json       POST /printmulti/create.json

GET  /printprogress?id=232323      GET /printprogress?id=232323

GET  /printcancel                  GET /printcancel                          EFS (/var/local/print
                                                                                 
GET /print/-multi23444545.pdf.printout                               mapfish-print-multi23444545.pdf.printout
GET /print/9032936254995330149.pdf.printout                          mapfish-print9032936254995330149.pdf.printout

Compiling mapfish-print.jar

Use Java 7 (won't compile with older or newer version)

java -version
java version "1.7.0_181"
OpenJDK Runtime Environment (IcedTea 2.6.14) (7u181-2.6.14-1~deb8u1)
OpenJDK 64-Bit Server VM (build 24.181-b01, mixed mode)

Use custom branch 2.1.x_geoadmin3 and disable tests (as tests geodata are long gone):

2.1.x_geoadmin3* 130 ± ./gradlew  build -x test -x check
:compileJava UP-TO-DATE
:processResources UP-TO-DATE
:classes UP-TO-DATE
:imageMagickWar
:jar
:javadoc UP-TO-DATE
:libJavadocJar UP-TO-DATE
:libSourcesJar UP-TO-DATE
:standalone
:standaloneJavadocJar UP-TO-DATE
:standaloneSourcesJar UP-TO-DATE
:war
:assemble
:build
:e2e-tests:compileJava UP-TO-DATE
:e2e-tests:processResources UP-TO-DATE
:e2e-tests:classes UP-TO-DATE
:e2e-tests:jar UP-TO-DATE
:e2e-tests:assemble UP-TO-DATE
:e2e-tests:build

BUILD SUCCESSFUL

Total time: 23.3 secs

Getting started

Checkout the source code:

git clone https://github.com/geoadmin/print-service.git

or when you're using ssh key (see https://help.github.com/articles/generating-ssh-keys):

make user

Flask WSGI application

Flask alone development:

make server

or serving with gunicorn

make gunicornserver

Tomcat

The war file print-servlet-2.1.3-SNAPSHOT.war is based on the mapfish-print 2.1.3 branch #46d901520

If you update files in the tomcat directory, you'll have to rebuild the .war file using the command:

make printwar

This generate a new file service-print-main.war using the BASEWAR war file.

Docker

Building

make composetemplatedev dockerbuild

This build three docker images, labeled staging:

swisstopo/service-print          staging               538532a4bed5        2 minutes ago       374.5 MB
swisstopo/service-print-nginx    staging               f67aa9b5baa1        35 hours ago        152.3 MB
swisstopo/service-print-tomcat   staging               17c35a184a46        4 days ago          424.7 MB

Running locally

make dockerrun

or

docker-compose up

Testing

Checker

Look for the Server header!

Nginx checker

curl -I localhost:8009/checker
HTTP/1.1 200 OK
Server: nginx/1.13.3
Date: Mon, 20 Nov 2017 10:02:36 GMT
Content-Type: text/plain
Content-Length: 2
Connection: keep-alive
Content-Type: text/plain

Flask wsgi checker

curl -I localhost:8010/checker
HTTP/1.1 200 OK
Server: gunicorn/19.7.1
Date: Mon, 20 Nov 2017 10:03:12 GMT
Connection: close
Content-Type: text/html; charset=utf-8
Content-Length: 2

Tomcat checker

curl -I localhost:8011/service-print-main/checker
HTTP/1.1 200 OK
Server: Apache-Coyote/1.1
Accept-Ranges: bytes
ETag: W/"3-1510759980000"
Last-Modified: Wed, 15 Nov 2017 15:33:00 GMT
Content-Length: 3
Date: Mon, 20 Nov 2017 10:04:06 GMT

or

curl -I localhost:8011/checker
HTTP/1.1 200 OK
Server: Apache-Coyote/1.1
Accept-Ranges: bytes
ETag: W/"3-1510768712000"
Last-Modified: Wed, 15 Nov 2017 17:58:32 GMT
Content-Length: 3
Date: Mon, 20 Nov 2017 10:14:59 GMT

Nginx to tomcat checker

curl -I localhost:8009/tomcat_checker
HTTP/1.1 200 OK
Server: nginx/1.13.3
Date: Mon, 20 Nov 2017 10:15:44 GMT
Content-Length: 3
Connection: keep-alive
Accept-Ranges: bytes
ETag: W/"3-1510759980000"
Last-Modified: Wed, 15 Nov 2017 15:33:00 GMT

Nginx to Flask/wsgi checker

curl -I localhost:8009/wsgi_checker
HTTP/1.1 200 OK
Server: nginx/1.13.3
Date: Mon, 20 Nov 2017 10:16:06 GMT
Content-Type: text/html; charset=utf-8
Content-Length: 2

Pass-through checker (nginx-->flask-->tomcat)

curl -I  localhost:8009/backend_checker
HTTP/1.1 200 OK
Server: nginx/1.13.3
Date: Mon, 20 Nov 2017 10:16:40 GMT
Content-Type: text/html; charset=utf-8
Content-Length: 2
Connection: keep-alive

Tomcat

Request to tomcat directly, using TOMCAT_PORT (8011):

curl localhost:8011/service-print-main/pdf/info.json
{"scales":[{"name":"1:500","value":"500.0"},{"name":"1:1,000","value":"1000.0"},{"name":"1:2,500","value":"2500.0"},{"name":"1:5,000","value":"5000.0"},{"name":"1:10,000","value":"10000.0"},{"name":"1:20,000","value":"20000.0"},{"name":"1:25,000","value":"25000.0"},{"name":"1:50,000","value":"50000.0"},{"name":"1:100,000","value":"100000.0"},{"name":"1:200,000","value":"200000.0"},{"name":"1:300,000","value":"300000.0"},{"name":"1:500,000","value":"500000.0"},{"name":"1:1,000,000","value":"1000000.0"},{"name":"1:1,500,000","value":"1500000.0"},{"name":"1:2,500,000","value":"2500000.0"}],"dpis":[{"name":"150","value":"150"}],"outputFormats":[{"name":"pdf"}],"layouts":[{"name":"1 A4 landscape","map":{"width":802,"height":530},"rotation":true},{"name":"2 A4 portrait","map":{"width":550,"height":760},"rotation":true},{"name":"3 A3 landscape","map":{"width":1150,"height":777},"rotation":true},{"name":"4 A3 portrait","map":{"width":802,"height":1108},"rotation":true}],"printURL":"http://localhost:8011/service-print-main/pdf/print.pdf","createURL":"http://localhost:8011/service-print-main/pdf/create.json"}

Request throught nginx(proxy for above request, but using NGINX_PORT)

curl localhost:8009/service-print-main/pdf/info.json
{"scales":[{"name":"1:500","value":"500.0"},{"name":"1:1,000","value":"1000.0"},{"name":"1:2,500","value":"2500.0"},{"name":"1:5,000","value":"5000.0"},{"name":"1:10,000","value":"10000.0"},{"name":"1:20,000","value":"20000.0"},{"name":"1:25,000","value":"25000.0"},{"name":"1:50,000","value":"50000.0"},{"name":"1:100,000","value":"100000.0"},{"name":"1:200,000","value":"200000.0"},{"name":"1:300,000","value":"300000.0"},{"name":"1:500,000","value":"500000.0"},{"name":"1:1,000,000","value":"1000000.0"},{"name":"1:1,500,000","value":"1500000.0"},{"name":"1:2,500,000","value":"2500000.0"}],"dpis":[{"name":"150","value":"150"}],"outputFormats":[{"name":"pdf"}],"layouts":[{"name":"1 A4 landscape","map":{"width":802,"height":530},"rotation":true},{"name":"2 A4 portrait","map":{"width":550,"height":760},"rotation":true},{"name":"3 A3 landscape","map":{"width":1150,"height":777},"rotation":true},{"name":"4 A3 portrait","map":{"width":802,"height":1108},"rotation":true}],"printURL":"http://localhost:8009/service-print-main/pdf/print.pdf","createURL":"http://localhost:8009/service-print-main/pdf/create.json"}

Nginx

Standard nginx request to tomcat:

curl localhost:8009/print/info.json
{"scales":[{"name":"1:500","value":"500.0"},{"name":"1:1,000","value":"1000.0"},{"name":"1:2,500","value":"2500.0"},{"name":"1:5,000","value":"5000.0"},{"name":"1:10,000","value":"10000.0"},{"name":"1:20,000","value":"20000.0"},{"name":"1:25,000","value":"25000.0"},{"name":"1:50,000","value":"50000.0"},{"name":"1:100,000","value":"100000.0"},{"name":"1:200,000","value":"200000.0"},{"name":"1:300,000","value":"300000.0"},{"name":"1:500,000","value":"500000.0"},{"name":"1:1,000,000","value":"1000000.0"},{"name":"1:1,500,000","value":"1500000.0"},{"name":"1:2,500,000","value":"2500000.0"}],"dpis":[{"name":"150","value":"150"}],"outputFormats":[{"name":"pdf"}],"layouts":[{"name":"1 A4 landscape","map":{"width":802,"height":530},"rotation":true},{"name":"2 A4 portrait","map":{"width":550,"height":760},"rotation":true},{"name":"3 A3 landscape","map":{"width":1150,"height":777},"rotation":true},{"name":"4 A3 portrait","map":{"width":802,"height":1108},"rotation":true}],"printURL":"http://localhost:8011/service-print-main/pdf/print.pdf","createURL":"http://localhost:8011/service-print-main/pdf/create.json"}

Real case

You may use mapfish print examples to post real specs files to the print server (some examples are outdated)

Debuging

Rancher

Deploying to rancher (dev)

Set RANCHER_ACCESS_KEY, RANCHER_SECRET_KEY and RANCHER_URL pointing to the rancher dev environment

Push you images to dockerhub

docker push swisstopo/service-print:staging
docker push swisstopo/service-print-nginx:staging 
docker push swisstopo/service-print-tomcat:staging

Deploy your images to rancher

Rancher dev is always using the images tagged staging

make rancherdeploydev

Testing

curl service-print.dev.bgdi.ch/print/info.json?url=http://service-print.dev.bgdi.ch
{"scales":[{"name":"1:500","value":"500.0"},{"name":"1:1,000","value":"1000.0"},{"name":"1:2,500","value":"2500.0"},{"name":"1:5,000","value":"5000.0"},{"name":"1:10,000","value":"10000.0"},{"name":"1:20,000","value":"20000.0"},{"name":"1:25,000","value":"25000.0"},{"name":"1:50,000","value":"50000.0"},{"name":"1:100,000","value":"100000.0"},{"name":"1:200,000","value":"200000.0"},{"name":"1:300,000","value":"300000.0"},{"name":"1:500,000","value":"500000.0"},{"name":"1:1,000,000","value":"1000000.0"},{"name":"1:1,500,000","value":"1500000.0"},{"name":"1:2,500,000","value":"2500000.0"}],"dpis":[{"name":"150","value":"150"}],"outputFormats":[{"name":"pdf"}],"layouts":[{"name":"1 A4 landscape","map":{"width":802,"height":530},"rotation":true},{"name":"2 A4 portrait","map":{"width":550,"height":760},"rotation":true},{"name":"3 A3 landscape","map":{"width":1150,"height":777},"rotation":true},{"name":"4 A3 portrait","map":{"width":802,"height":1108},"rotation":true}],"printURL":"http://service-print.dev.bgdi.ch/print.pdf","createURL":"http://service-print.dev.bgdi.ch/create.json"}

The createURL must be http://service-print.dev.bgdi.ch/create.json

Taging images and deploy to Docker Hub

Do not ever use images tagged with staging on rancher int and prod environment!

Deploy to int

Tag you image

Tag the staging images with the last git commit short hash:

docker tag swisstopo/service-print:staging swisstopo/service-print:83ed21d    
docker tag swisstopo/service-print-nginx:staging swisstopo/service-print-nginx:83ed21d    
docker tag swisstopo/service-print-tomcat:staging swisstopo/service-print-tomcat:83ed21d

or with

export IMAGE_TAG=r181212_abcded make dockertag

Push to dockerhub

Push the newly tagged instances to dockerhub

docker push swisstopo/service-print:83ed21d    
docker push swisstopo/service-print-nginx:83ed21d    
docker push swisstopo/service-print-tomcat:83ed21d

or with

make dockerpush

Update the IMAGE_TAG in both int.env and prod.env (because you want to deploy theses images to prod)

And deploy to rancher

 make rancherdeployint

Testing

curl -v --max-time 60 --silent --header "Content-Type: application/json; charset=UTF-8" \
  --header "Referer: https://map.geo.admin.ch" \
  --header "User-Agent: Zorba is debugging the print server" \ 
  --header "Host: print.geo.admin.ch" --data @specs/lv95_simple.json \
  -X POST "https://print.geo.admin.ch/print/create.json?url=https%3A%2F%2Fprint.geo.admin.ch%2Fprint"

Response

*   Trying 54.72.183.195...
* Connected to print.geo.admin.ch (54.72.183.195) port 443 (#0)
[snip...]
< HTTP/1.1 100 Continue
* We are completely uploaded and fine
< HTTP/1.1 200 OK
< Accept-Ranges: bytes
< Access-Control-Allow-Headers: Accept,Authorization,Cache-Control,Content-Type,DNT,If-Modified-Since,Keep-Alive,Origin,User-Agent,X-Requested-With
< Access-Control-Allow-Methods: GET, POST, OPTIONS
< Access-Control-Allow-Origin: *
< Age: 0
< Content-Type: application/json;charset=utf-8
< Date: Tue, 03 Jul 2018 08:11:32 GMT
< Server: nginx/1.13.3
< Via: 1.1 varnish-v4
< X-Cache: MISS
< X-Varnish: 66879729
< Content-Length: 78
< Connection: keep-alive
<
* Connection #0 to host print.geo.admin.ch left intact
{"getURL":"https://print.geo.admin.ch/print/8727187409122563429.pdf.printout"}

Get the PDF

curl -LO https://print.geo.admin.ch/print/8727187409122563429.pdf.printout

Check it

file 8727187409122563429.pdf.printout
8727187409122563429.pdf.printout: PDF document, version 1.5

Et voilà

Name		Name	Last commit message	Last commit date
Latest commit History 4,342 Commits
nginx		nginx
print3		print3
specs		specs
tests		tests
tomcat		tomcat
.coveragerc		.coveragerc
.dockerignore		.dockerignore
.gitattributes		.gitattributes
.gitignore		.gitignore
7748734572216011422.pdf.png		7748734572216011422.pdf.png
CHANGES.txt		CHANGES.txt
Dockerfile		Dockerfile
Jenkinsfile		Jenkinsfile
LICENSE.md		LICENSE.md
MANIFEST.in		MANIFEST.in
Makefile		Makefile
README.md		README.md
buildspec.yml		buildspec.yml
dev-requirements.txt		dev-requirements.txt
dev.env		dev.env
docker-compose.yml.in		docker-compose.yml.in
docker-entrypoint.sh		docker-entrypoint.sh
int.env		int.env
prod.env		prod.env
rancher-compose.yml.in		rancher-compose.yml.in
rc_branch.mako		rc_branch.mako
rc_user		rc_user
requirements.txt		requirements.txt
setup.cfg		setup.cfg
setup.py		setup.py

License

geoadmin/service-print

Folders and files

Latest commit

History

Repository files navigation

Print Service

Architecture

Elastic Load Balancer

Elastic File System

Docker containers

Endpoint

Hostnames

ELB

URI

Compiling mapfish-print.jar

Getting started

Flask WSGI application

Tomcat

Docker

Building

Running locally

Testing

Checker

Tomcat

Nginx

Real case

Debuging

Rancher

Deploying to rancher (dev)

Push you images to dockerhub

Deploy your images to rancher

Testing

Taging images and deploy to Docker Hub

Deploy to int

Tag you image

Push to dockerhub

Testing

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 33

Packages 0

Contributors 26

Languages

Packages