Merge pull request #155 from mrodriguez3313/main

adding cm4 barcode image to hardware doc
functionland · Apr 8, 2024 · 5886c9d · 5886c9d
2 parents 8c976b2 + 1f4f2d7
commit 5886c9d
Show file tree

Hide file tree

Showing 2 changed files with 1 addition and 0 deletions.
diff --git a/docs/functionyard/hardware/fxblox-hardware.mdx b/docs/functionyard/hardware/fxblox-hardware.mdx
@@ -16,6 +16,7 @@ It is important to know which Blox you have. The manual firmware update process
         Only about <b>100</b> of these were distributed during the Indiegogo delivery phase. You would have had to fill in a form to specifically opt-in to receive this FxBlox. Other than that there are two key ways to tell if you have this model.
         <ol type="1">
         <li> <b>Check the barcode.</b> On the side of the original box that the device came in. It should look like this.</li>
+        <img src="/img/fxyard-network/cm4-bc.png" />
         <li> <b>Open up the device.</b> You can do this by removing the four black screws of the three-port USB housing, then the four silver screws on the bottom of the Blox. You will be able to slide out the board and see this device.
         <ul>
             <li><b>Front</b></li>

diff --git a/static/img/fxyard-network/cm4-bc.png b/static/img/fxyard-network/cm4-bc.png