fix line formatting

docs/backup_workstations.rst

@@ -49,8 +49,9 @@ hub which may reduce transfer speeds.
 Preparing the Backup Device
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-First you must boot the *primary Tails USB* drive. Ensure you set an administrator
-password set at the login screen. Then navigate to **Applications** ▸ **Utilities** ▸ **Disks**.
+First you must boot the *primary Tails USB* drive. Ensure you set an
+administrator password set at the login screen. Then navigate to
+**Applications** ▸ **Utilities** ▸ **Disks**.
 
 |Applications Utilities Disks|
 
@@ -69,7 +70,8 @@ Fill out the form as follows:
 |Format Backup Drive|
 
 * **Erase**: `Don't overwrite existing data (Quick)`
-* **Type**: `Internal disk for use with other Linux systems only (Ext4)`, and make sure `Password protect volume (LUKS)` is checked
+* **Type**: `Internal disk for use with other Linux systems only (Ext4)`, and
+make sure `Password protect volume (LUKS)` is checked
 * **Name**: `Backup`
 
 |Backup Drive Passphrase|
@@ -180,17 +182,17 @@ the Backup USB. Click its entry in the lefthand column and enter its decryption
 passphrase when prompted. Its volume name (``Backup`` in the instructions above)
 will appear in place of the generic ``N.M GB Encrypted`` name.
 
-Next, insert the new workstation USB, and click its entry in the lefhand column. When
-prompted, enter its persistent volume's passphrase. The volume name ``TailsData``
-will appear in the lefthand column.
+Next, insert the new workstation USB, and click its entry in the lefthand
+column. When prompted, enter its persistent volume's passphrase. The volume
+name ``TailsData`` will appear in the lefthand column.
 
 Copy the Backup to the New Workstation USB's Persistent Volume
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Open a terminal by navigating to **Applications** ▸ **Favorites**
 ▸ **Terminal** . Next, use the ``rsync`` command to copy the appropriate backup
-folder to the new workstation USB's persistent volume. For example, if the backup
-folder to be copied is named ``admin-backup``, run the following command:
+folder to the new workstation USB's persistent volume. For example, if the
+backup folder to be copied is named ``admin-backup``, run the following command:
 
 .. code:: sh
 
@@ -201,9 +203,9 @@ folder to be copied is named ``admin-backup``, run the following command:
           paths in the command above, otherwise the backup files will not
           be restored correctly.
 
-Once the command is complete, click the Eject button for the ``TailsData`` volume
-in the lefthand column of the file manager, wait for the ``TailsData`` entry to
-disappear from the column, and remove the new workstation USB.
+Once the command is complete, click the Eject button for the ``TailsData``
+volume in the lefthand column of the file manager, wait for the ``TailsData``
+entry to disappear from the column, and remove the new workstation USB.
 
 You may now repeat the restore process for any other USBs that you wish to
 restore, or shut down the host Tails USB and test your new workstation USB by