spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe

Registers of DSPI should not be accessed before enabling its clock.  On
Toradex Colibri VF50 on Iris carrier board this could be seen during
bootup as imprecise abort:

    Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
    Internal error: : 1c06 [FireflyTeam#1] ARM
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty rockchip-linux#97
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    Backtrace:
    [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
    [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
    [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8)
    [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4)
    [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4)
    [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
    [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
    [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
    [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50)
    [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20)
    [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174)
    [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8)
    [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114)
    [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)

Cc: <[email protected]>
Fixes: 5ee67b5 ("spi: dspi: clear SPI_SR before enable interrupt")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

drivers/spi/spi-fsl-dspi.c

@@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev)
 		}
 	}
 
+	dspi->clk = devm_clk_get(&pdev->dev, "dspi");
+	if (IS_ERR(dspi->clk)) {
+		ret = PTR_ERR(dspi->clk);
+		dev_err(&pdev->dev, "unable to get clock\n");
+		goto out_master_put;
+	}
+	ret = clk_prepare_enable(dspi->clk);
+	if (ret)
+		goto out_master_put;
+
 	dspi_init(dspi);
 	dspi->irq = platform_get_irq(pdev, 0);
 	if (dspi->irq < 0) {
 		dev_err(&pdev->dev, "can't get platform irq\n");
 		ret = dspi->irq;
-		goto out_master_put;
+		goto out_clk_put;
 	}
 
 	ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
 			pdev->name, dspi);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
-		goto out_master_put;
-	}
-
-	dspi->clk = devm_clk_get(&pdev->dev, "dspi");
-	if (IS_ERR(dspi->clk)) {
-		ret = PTR_ERR(dspi->clk);
-		dev_err(&pdev->dev, "unable to get clock\n");
-		goto out_master_put;
+		goto out_clk_put;
 	}
-	ret = clk_prepare_enable(dspi->clk);
-	if (ret)
-		goto out_master_put;
 
 	if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
 		ret = dspi_request_dma(dspi, res->start);