pdk-includes

This repository contains include files for Padauk MCUs.

Example code that uses these include files can be found here: free-pdk-examples

Warning: This is a work in progress and may change significantly before being considered stable. Use at your own risk.

This repo is intended to be integrated into other projects either as a git Submodule or by manual file copy.

This repo should be installed into a pdk/ subdirectory in the root includes directory of a parent project.

To install as a git Submodule:

• From the root includes directory:
  • git submodule add https://github.com/free-pdk/pdk-includes.git pdk
• More info: https://git-scm.com/book/en/v2/Git-Tools-Submodules

These include files assume the use of:

• The open-source Small Device C Compiler (SDCC)
  • requires version 3.9.0 or newer, version 4.0.0+ preferred

File Layout:

• device.h - The main include file.
  • Factory that pulls in the appropriate device/XXX.h include file and other supporting files.
    • NOTE: Requires definition of the intended Padauk IC device, usually by specifying -D$(DEVICE) on the SDCC command line
• device/XXX.h - The main device specific include files, one per device.
  • Contain device specific configuration values like: register addresses, fuse address/values, factory calibration address(es), peripheral configuration, etc...
  • Usually pulled in automatically by including device.h.
    • NOTE: If needed, up to one of these can be included manually instead of by including device.h. Doing so may also require manual inclusion of the other include files below.
• device/periph/XXX.h - Common device peripheral include files.
  • Contain peripheral specific register __sfr and value definitions.
  • The appropriate ones are pulled in automatically by device/XXX.h files.
  • When there is enough commonality between devices, they share the same peripheral file (with some configurability allowed), otherwise the peripheral files are split and the device/XXX.h file pulls in the appropriate one.
• util.h - Common utility macros.
  • Contains macros for built-in opcodes and inline assembler statements
  • This is pulled in automatically by device.h
• fuse.h -
  • Contains a macro for setting the FUSE word at the appropriate address.
    • The FUSE address is usually the last word of the device
    • Requires definition of FUSE_ADDR and FUSE values, usually performed by device/XXX.h.
  • This is pulled in automatically by device.h
• factory_calibration.h - Factory calibration macros
  • Contains macros for using factory installed calibration values (IHRCR and/or BGTR).
    • OTP devices usually only include factory calibration for BGTR (bandgap)
    • MTP devices usually contain factory calibration for boty IHRCR (internal 16MHz high speed oscillator) as well at BGTR (bandgap)
    • Requires definition of FACTORY_IHRCR_ADDR and/or FACTORY_BGTR_ADDR values, usually performed by device/XXX.h.
  • This is pulled in automatically by device.h
• sysclock.h - System clock macros
  • Contains macros for setting the system clock to the various IHRC and ILRC frequencies.
    • Requires definition of CLKMD_* values, usually performed by device/XXX.h.
  • This is pulled in automatically by device.h

Copyright and License:

• Copyright (C) 2019-2020 - Original version by freepdk (https://free-pdk.github.io)
• Copyright (C) 2020 - Major refactor by serisman ([email protected])
• License: GPL v2 (or later) + Linking Exception
  • The linking exception allows this library to be linked (by SDCC) with proprietary (closed source) applications.