Pulling the Code

1. Set up and configure your Netbeans and FRC tools installation.

2. Download and install git for your system.

3. On Linux-based systems, open up a terminal; on Windows, find "Git Bash" in the Start Menu and open it up.

4. You'll start out in your home directory. You'll need to switch over to your "NetbeansProjects" directory, which is usually in your "Documents" folder. Run the following command inside your console window:

   cd Documents/NetbeansProjects
   

5. Pull down a copy of this repository by running the following commands:

   git clone [email protected]:frc604/FRC-2014.git
   cd FRC-2014/
   git submodule init
   git submodule update
   cd ..
   mv FRC-2014 2014
   

6. Go to Netbeans and create a new "Simple Robot Template" project with the following settings:

   Field	Value
   Project Name	FRC-2014
   Package	com._604robotics.robot2014
   Main Robot Class	Robot2014

   If you get strange errors starting up the code after a deploy, it's because you messed these settings up!

7. Close Netbeans.

8. Switch back over to your console window, and run the following commands to merge in the repository contents with your new project:

   rm -r FRC-2014/src
   mv 2014/* FRC-2014
   rm -r 2014
   

9. Re-open Netbeans and you should have a fully set-up project.

If you have any questions, talked to Michael.