Skip to content

Supported firmware versions

Jump to bottom
Joonas Trussmann edited this page Dec 12, 2022 · 6 revisions

Air Unit, Vista and FPV Goggles V1

Supported firmware versions

  • V01.00.0606
  • V01.00.0608 - latest, required on air side for Runcam Wasp compatibility

Older versions may or may not work. It is safe to simply upgrade to the latest firmware using DJI FPV Assistant 2.

FPV Goggles V2

The following applies to rooting the V2 Goggles. You will need to be on one of these versions in order to root. After doing so you may update your firmware via DJI Assistant prior to installing wtfos for Avata/O3 AU compatability.

On V2 Goggles you must check the firmware version via the Assistant or the DJI FPV Drone mode menus. The DJI Digital FPV System a.k.a. "DIY mode" menus lie and always show V01.00.0606 at most, despite the actual firmware installed.

Supported firmware versions for rooting

  • V01.00.0606 - latest DIY mode firmware, recommended
  • V01.02.0000 *
  • V01.02.0001 *

* known to work, but subtle issues may occur

All other versions can be downgraded to V01.00.0606 using butter. After rooting and prior to installing wtfos you may upgrade to the latest version using DJI Assistant.

Goggles 2 & O3 AU

Stay tuned.

Was this page useful?

If the information on this page helped you, please consider donating to our Open Collective.

Open Collective Donate

Clone this wiki locally