v01.30.2560-RAX

Changes:

1.  restore change item as merge openbmc code base V2.2:
    (1) The system boot status LED is not lit up for BMC status
    (2) Share NIC and Intel 1Gb pcie lan card WOL function not work.
    (3) FSI GPIO mapping dependent on the board ID.
    (4) Add inventory item for zaius((CPU, DIMM, MB information)
    (5) Front panel reset button no function
    (6) USB function
2.fix occ dimm sensors
3.fix update new ip address and  auto delete old ip address
4.fix "Firmware Revision" from hexadecimal to decimal

v01.20.2560-RAX

Changes

    - merge tag v2.2
    - add BIOS version for Pnor Info
    - fix HDD critical and warn temp scale

v01.10.2560-RAX

Changes

 - BMC console cheange to UART1 (RJ45) and host serial change to UART5.
 - Enable occ-openpower-control (occ binds fail after power cycle that is fix).
 - Implement NVME sensors reading (Samsung PM963).
 - Implement HDD sensors reading through expander board.
 - Add the hwmon coefiecent for ADC sensors.

Bug fixed

 - Fix BMC hanging issue (https://gerrit.openbmc-project.xyz/#/c/9002/)
 - 00024790 : BMC can't get BIOS FW version via REST API.
 - 00024872 : Display message " No such device " while bind OCC under BMC
 - 00024849 : OCC auto unbind after the system reboot.
 - 00023440 : OCC active status display is incorrect on rest-api

v01.00.2560-RAX

Changes

 - Implement the fan algorithm and need to meet the fan table (G2_sys_behaivor_Thermal table_X04 update.xlsx) that provide by thermal.
 - BMC console cheange to UART1 (RJ45)
 - Implement NCSI switch mechanism (LV card or MEZZ card)

Bug fixed

 - Fix BMC hanging issue
 - 00024874 - The worng Fan4 LED lights behavior when the system in the AUX state.
 - 00024886 - The BMC does not generate SEL when system remove fan.
 - 00024866 - The ambient_mb threshold of the BMC does not match the thermal table.
 - 00024848 - No fan power board infomation via RestAPI
 - 00024830 - BMC can't get Backplane FRU.
 - 00024790 - BMC no any PCI-e slot objects information for read

v00.90.2560-RAX

Changes

 - Add i2craw utility.
 - Implement HDD temperature sensors.

Bug fixed

 - Fix fan algorithm memory leak issue.

v00.80.2560-RAX

Changes

 - Update code base to v2.0.0.
 - Implement fan algorithm that referred by spec from thermal.
 - Power button and reset button behavior change (send request to OS to graceful shut down).
 - Add all critical event from senosors and light on LED (attention and platform fault event).
 - Get FRU infomation from Motherboard / Backplane / FPDB/ EXP board (add into inventory).
 - Implement random power on.
 - Get HDD temp.
 - System status LED behavior is not correct (LED did not turn off after BMC ready.)

Bug fixed

 - Fix pwm abnormal to control Fan.(pwm2 control fan 1,2,4,5, pwm3 control fan 3,6).
 - QIS-00022327 : G2:System crash when CPU temperature is overheated(referred fan table form thermal)
 - QIS-00023298 : Fan LED cannot show red when Fan duty cycle < 30% (Need EE to clarify issue related to HW or not)

v03.08.00

Changes

 - Update code base to v2.0.0.
 - Implement fan algorithm that referred by spec from thermal.
 - Power button and reset button behavior change (send request to OS to graceful shut down).
 - Add all critical event from senosors and light on LED (attention and platform fault event).
 - Get FRU infomation from Motherboard / Backplane / FPDB/ EXP board (add into inventory).
 - Implement random power on.
 - Get HDD temp.
 - System status LED behavior is not correct (LED did not turn off after BMC ready.)

Bug fixed

 - Fix pwm abnormal to control Fan.(pwm2 control fan 1,2,4,5, pwm3 control fan 3,6).
 - QIS-00022327 : G2:System crash when CPU temperature is overheated(referred fan table form thermal)
 - QIS-00023298 : Fan LED cannot show red when Fan duty cycle < 30% (Need EE to clarify issue related to HW or not)

v00.70.2560-RAX

Changes

    1. Update code base to v1.99.10.
    2. Disable openpower-occ-control
    3. Access the CPU temp and power consumption under /xyz/openbmc_project/sensors via RSETFUL
    4. Add inventory item (CPU, DIMM, MB information).

Fix

    1. QIS-00023332 : Front panel reset button no function.
    2. QIS-00023373 : The temperature of ambient mb and fpdb value are show "0" in many items (Threshold value).
    3. QIS-00023333 : System will power on after press reset button.
    4. QIS-00023669 : RTC timer stop after AC power remove (Set time owner to BMC).
    5. QIS-00023298 : Fan LED cannot show red when Fan duty cycle < 30%.

v00.60.2560-RAX

Changes

1. Merged tag v1.99.8.
2. GPIO mapping for BMC_LPCRST_N (GPIOA3 mapping GPIOAC7)
3. Implement OCC function.
4. As fan_algorithm destory for full fan speed.

[Barreleye-G2 formal release] FXN release v0.50.2560

Bug fixed

    1. [QIS 00022280] Share NIC and Intel 1Gb pcie lan card WOL function not work.
    2. [QIS 00022395] G2:BMC dedicate USB port no function.
    3. [QIS 00022371] G2:System auto power on after power off system.

Changes

    1. Random Power On.
    2. FSI GPIO mapping dependent on the board ID.