Merge pull request voxpupuli#36 from traylenator/modulesync

modulesync  4.0.0 and general alignment to voxpupuli.

.editorconfig

@@ -0,0 +1,14 @@
+# editorconfig.org
+
+# MANAGED BY MODULESYNC
+
+root = true
+
+[*]
+charset = utf-8
+end_of_line = lf
+indent_size = 2
+tab_width = 2
+indent_style = space
+insert_final_newline = true
+trim_trailing_whitespace = true

.github/CONTRIBUTING.md

@@ -0,0 +1,282 @@
+# Contribution guidelines
+
+## Table of contents
+
+* [Contributing](#contributing)
+* [Writing proper commits - short version](#writing-proper-commits-short-version)
+* [Writing proper commits - long version](#writing-proper-commits-long-version)
+* [Dependencies](#dependencies)
+  * [Note for OS X users](#note-for-os-x-users)
+* [The test matrix](#the-test-matrix)
+* [Syntax and style](#syntax-and-style)
+* [Running the unit tests](#running-the-unit-tests)
+* [Unit tests in docker](#unit-tests-in-docker)
+* [Integration tests](#integration-tests)
+
+This module has grown over time based on a range of contributions from
+people using it. If you follow these contributing guidelines your patch
+will likely make it into a release a little more quickly.
+
+## Contributing
+
+Please note that this project is released with a Contributor Code of Conduct.
+By participating in this project you agree to abide by its terms.
+[Contributor Code of Conduct](https://voxpupuli.org/coc/).
+
+* Fork the repo.
+* Create a separate branch for your change.
+* We only take pull requests with passing tests, and documentation. [travis-ci](http://travis-ci.org) runs the tests for us. You can also execute them locally. This is explained [in a later section](#the-test-matrix).
+* Checkout [our docs](https://voxpupuli.org/docs/reviewing_pr/) we use to review a module and the [official styleguide](https://puppet.com/docs/puppet/6.0/style_guide.html). They provide some guidance for new code that might help you before you submit a pull request.
+* Add a test for your change. Only refactoring and documentation changes require no new tests. If you are adding functionality or fixing a bug, please add a test.
+* Squash your commits down into logical components. Make sure to rebase against our current master.
+* Push the branch to your fork and submit a pull request.
+
+Please be prepared to repeat some of these steps as our contributors review your code.
+
+Also consider sending in your profile code that calls this component module as an acceptance test or provide it via an issue. This helps reviewers a lot to test your use case and prevents future regressions!
+
+## Writing proper commits - short version
+
+* Make commits of logical units.
+* Check for unnecessary whitespace with "git diff --check" before committing.
+* Commit using Unix line endings (check the settings around "crlf" in git-config(1)).
+* Do not check in commented out code or unneeded files.
+* The first line of the commit message should be a short description (50 characters is the soft limit, excluding ticket number(s)), and should skip the full stop.
+* Associate the issue in the message. The first line should include the issue number in the form "(#XXXX) Rest of message".
+* The body should provide a meaningful commit message, which:
+  *uses the imperative, present tense: `change`, not `changed` or `changes`.
+  * includes motivation for the change, and contrasts its implementation with the previous behavior.
+  * Make sure that you have tests for the bug you are fixing, or feature you are adding.
+  * Make sure the test suites passes after your commit:
+  * When introducing a new feature, make sure it is properly documented in the README.md
+
+## Writing proper commits - long version
+
+  1.  Make separate commits for logically separate changes.
+
+      Please break your commits down into logically consistent units
+      which include new or changed tests relevant to the rest of the
+      change.  The goal of doing this is to make the diff easier to
+      read for whoever is reviewing your code.  In general, the easier
+      your diff is to read, the more likely someone will be happy to
+      review it and get it into the code base.
+
+      If you are going to refactor a piece of code, please do so as a
+      separate commit from your feature or bug fix changes.
+
+      We also really appreciate changes that include tests to make
+      sure the bug is not re-introduced, and that the feature is not
+      accidentally broken.
+
+      Describe the technical detail of the change(s).  If your
+      description starts to get too long, that is a good sign that you
+      probably need to split up your commit into more finely grained
+      pieces.
+
+      Commits which plainly describe the things which help
+      reviewers check the patch and future developers understand the
+      code are much more likely to be merged in with a minimum of
+      bike-shedding or requested changes.  Ideally, the commit message
+      would include information, and be in a form suitable for
+      inclusion in the release notes for the version of Puppet that
+      includes them.
+
+      Please also check that you are not introducing any trailing
+      whitespace or other "whitespace errors".  You can do this by
+      running "git diff --check" on your changes before you commit.
+
+  2.  Sending your patches
+
+      To submit your changes via a GitHub pull request, we _highly_
+      recommend that you have them on a topic branch, instead of
+      directly on `master`.
+      It makes things much easier to keep track of, especially if
+      you decide to work on another thing before your first change
+      is merged in.
+
+      GitHub has some pretty good
+      [general documentation](http://help.github.com/) on using
+      their site.  They also have documentation on
+      [creating pull requests](http://help.github.com/send-pull-requests/).
+
+      In general, after pushing your topic branch up to your
+      repository on GitHub, you can switch to the branch in the
+      GitHub UI and click "Pull Request" towards the top of the page
+      in order to open a pull request.
+
+
+  3.  Update the related GitHub issue.
+
+      If there is a GitHub issue associated with the change you
+      submitted, then you should update the ticket to include the
+      location of your branch, along with any other commentary you
+      may wish to make.
+
+## Dependencies
+
+The testing and development tools have a bunch of dependencies,
+all managed by [bundler](http://bundler.io/) according to the
+[Puppet support matrix](http://docs.puppetlabs.com/guides/platforms.html#ruby-versions).
+
+By default the tests use a baseline version of Puppet.
+
+If you have Ruby 2.x or want a specific version of Puppet,
+you must set an environment variable such as:
+
+```sh
+export PUPPET_VERSION="~> 5.5.6"
+```
+
+You can install all needed gems for spec tests into the modules directory by
+running:
+
+```sh
+bundle install --path .vendor/ --without development system_tests release --jobs "$(nproc)"
+```
+
+If you also want to run acceptance tests:
+
+```sh
+bundle install --path .vendor/ --with system_tests --without development release --jobs "$(nproc)"
+```
+
+Our all in one solution if you don't know if you need to install or update gems:
+
+```sh
+bundle install --path .vendor/ --with system_tests --without development release --jobs "$(nproc)"; bundle update; bundle clean
+```
+
+As an alternative to the `--jobs "$(nproc)` parameter, you can set an
+environment variable:
+
+```sh
+BUNDLE_JOBS="$(nproc)"
+```
+
+### Note for OS X users
+
+`nproc` isn't a valid command under OS x. As an alternative, you can do:
+
+```sh
+--jobs "$(sysctl -n hw.ncpu)"
+```
+
+## The test matrix
+
+### Syntax and style
+
+The test suite will run [Puppet Lint](http://puppet-lint.com/) and
+[Puppet Syntax](https://github.com/gds-operations/puppet-syntax) to
+check various syntax and style things. You can run these locally with:
+
+```sh
+bundle exec rake lint
+bundle exec rake validate
+```
+
+It will also run some [Rubocop](http://batsov.com/rubocop/) tests
+against it. You can run those locally ahead of time with:
+
+```sh
+bundle exec rake rubocop
+```
+
+### Running the unit tests
+
+The unit test suite covers most of the code, as mentioned above please
+add tests if you're adding new functionality. If you've not used
+[rspec-puppet](http://rspec-puppet.com/) before then feel free to ask
+about how best to test your new feature.
+
+To run the linter, the syntax checker and the unit tests:
+
+```sh
+bundle exec rake test
+```
+
+To run your all the unit tests
+
+```sh
+bundle exec rake spec
+```
+
+To run a specific spec test set the `SPEC` variable:
+
+```sh
+bundle exec rake spec SPEC=spec/foo_spec.rb
+```
+
+#### Unit tests in docker
+
+Some people don't want to run the dependencies locally or don't want to install
+ruby. We ship a Dockerfile that enables you to run all unit tests and linting.
+You only need to run:
+
+```sh
+docker build .
+```
+
+Please ensure that a docker daemon is running and that your user has the
+permission to talk to it. You can specify a remote docker host by setting the
+`DOCKER_HOST` environment variable. it will copy the content of the module into
+the docker image. So it will not work if a Gemfile.lock exists.
+
+### Integration tests
+
+The unit tests just check the code runs, not that it does exactly what
+we want on a real machine. For that we're using
+[beaker](https://github.com/puppetlabs/beaker).
+
+This fires up a new virtual machine (using vagrant) and runs a series of
+simple tests against it after applying the module. You can run this
+with:
+
+```sh
+bundle exec rake beaker
+```
+
+This will run the tests on the module's default nodeset. You can override the
+nodeset used, e.g.,
+
+```sh
+BEAKER_set=centos-7-x64 bundle exec rake beaker
+```
+
+There are default rake tasks for the various acceptance test modules, e.g.,
+
+```sh
+bundle exec rake beaker:centos-7-x64
+bundle exec rake beaker:ssh:centos-7-x64
+```
+
+If you don't want to have to recreate the virtual machine every time you can
+use `BEAKER_destroy=no` and `BEAKER_provision=no`. On the first run you will at
+least need `BEAKER_provision` set to yes (the default). The Vagrantfile for the
+created virtual machines will be in `.vagrant/beaker_vagrant_files`.
+
+Beaker also supports docker containers. We also use that in our automated CI
+pipeline at [travis-ci](http://travis-ci.org). To use that instead of Vagrant:
+
+```sh
+PUPPET_INSTALL_TYPE=agent BEAKER_IS_PE=no BEAKER_PUPPET_COLLECTION=puppet6 BEAKER_debug=true BEAKER_setfile=debian10-64{hypervisor=docker} BEAKER_destroy=yes bundle exec rake beaker
+```
+
+You can replace the string `debian10` with any common operating system.
+The following strings are known to work:
+
+* ubuntu1604
+* ubuntu1804
+* ubuntu2004
+* debian9
+* debian10
+* centos7
+* centos8
+
+The easiest way to debug in a docker container is to open a shell:
+
+```sh
+docker exec -it -u root ${container_id_or_name} bash
+```
+
+The source of this file is in our [modulesync_config](https://github.com/voxpupuli/modulesync_config/blob/master/moduleroot/.github/CONTRIBUTING.md.erb)
+repository.

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,26 @@
+<!--
+Thank you for contributing to this project!
+
+- This project has a Contributor Code of Conduct: https://voxpupuli.org/coc/
+- Please check that here is no existing issue or PR that addresses your problem.
+- Please fill the following form to enable us to help you.
+- Our vulnerabilities reporting process is at https://voxpupuli.org/security/
+
+-->
+
+## Affected Puppet, Ruby, OS and module versions/distributions
+
+- Puppet:
+- Ruby:
+- Distribution:
+- Module version:
+
+## How to reproduce (e.g Puppet code you use)
+
+## What are you seeing
+
+## What behaviour did you expect instead
+
+## Output log
+
+## Any additional information you'd like to impart

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,20 @@
+<!--
+Thank you for contributing to this project!
+
+- This project has a Contributor Code of Conduct: https://voxpupuli.org/coc/
+- Please check that here is no existing issue or PR that addresses your problem.
+- Our vulnerabilities reporting process is at https://voxpupuli.org/security/
+
+-->
+#### Pull Request (PR) description
+<!--
+Replace this comment with a description of your pull request.
+-->
+
+#### This Pull Request (PR) fixes the following issues
+<!--
+Replace this comment with the list of issues or n/a.
+Use format:
+Fixes #123
+Fixes #124
+-->

.github/SECURITY.md

@@ -0,0 +1,3 @@
+# Vox Pupuli Security Policy
+
+Our vulnerabilities reporting process is at https://voxpupuli.org/security/

.github/workflows/ci.yml

@@ -0,0 +1,47 @@
+name: CI
+
+on: pull_request
+
+jobs:
+  setup_matrix:
+    name: 'Setup Test Matrix'
+    runs-on: ubuntu-latest
+    outputs:
+      beaker_setfiles: ${{ steps.get-outputs.outputs.beaker_setfiles }}
+      puppet_major_versions: ${{ steps.get-outputs.outputs.puppet_major_versions }}
+      puppet_unit_test_matrix: ${{ steps.get-outputs.outputs.puppet_unit_test_matrix }}
+    env:
+      BUNDLE_WITHOUT: development:test:release
+    steps:
+      - uses: actions/checkout@v2
+      - name: Setup ruby
+        uses: ruby/setup-ruby@v1
+        with:
+          ruby-version: '2.7'
+          bundler-cache: true
+      - name: Run rake validate
+        run: bundle exec rake validate
+      - name: Setup Test Matrix
+        id: get-outputs
+        run: bundle exec metadata2gha --use-fqdn --pidfile-workaround false
+
+  unit:
+    needs: setup_matrix
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        include: ${{fromJson(needs.setup_matrix.outputs.puppet_unit_test_matrix)}}
+    env:
+      BUNDLE_WITHOUT: development:system_tests:release
+      PUPPET_VERSION: "~> ${{ matrix.puppet }}.0"
+    name: Puppet ${{ matrix.puppet }} (Ruby ${{ matrix.ruby }})
+    steps:
+      - uses: actions/checkout@v2
+      - name: Setup ruby
+        uses: ruby/setup-ruby@v1
+        with:
+          ruby-version: ${{ matrix.ruby }}
+          bundler-cache: true
+      - name: Run tests
+        run: bundle exec rake