Merge pull request #1 from torvalds/master

Merge linux 4.9.27

.mailmap

@@ -111,6 +111,7 @@ Mauro Carvalho Chehab <[email protected]> <[email protected]>
 Mauro Carvalho Chehab <[email protected]> <[email protected]>
 Matt Ranostay <[email protected]> Matthew Ranostay <[email protected]>
 Matt Ranostay <[email protected]> <[email protected]>
+Matt Ranostay <[email protected]> <[email protected]>
 Mayuresh Janorkar <[email protected]>
 Michael Buesch <[email protected]>
 Michel Dänzer <[email protected]>

CREDITS

@@ -1034,6 +1034,10 @@ S: 2037 Walnut #6
 S: Boulder, Colorado 80302
 S: USA
 
+N: Hans-Christian Noren Egtvedt
+E: [email protected]
+D: AVR32 architecture maintainer.
+
 N: Heiko Eißfeldt
 E: [email protected] [email protected]
 D: verify_area stuff, generic SCSI fixes
@@ -3398,6 +3402,10 @@ S: Suite 101
 S: Markham, Ontario L3R 2Z6
 S: Canada
 
+N: Haavard Skinnemoen
+M: Haavard Skinnemoen <[email protected]>
+D: AVR32 architecture port to Linux and maintainer.
+
 N: Rick Sladkey
 E: [email protected]
 D: utility hacker: Emacs, NFS server, mount, kmem-ps, UPS debugger, strace, GDB

Documentation/ABI/obsolete/sysfs-firmware-acpi

@@ -0,0 +1,8 @@
+What:		/sys/firmware/acpi/hotplug/force_remove
+Date:		Mar 2017
+Contact:	Rafael J. Wysocki <[email protected]>
+Description:
+		Since the force_remove is inherently broken and dangerous to
+		use for some hotplugable resources like memory (because ignoring
+		the offline failure might lead to memory corruption and crashes)
+		enabling this knob is not safe and thus unsupported.

Documentation/ABI/stable/sysfs-bus-usb

@@ -9,7 +9,7 @@ Description:
 		hubs this facility is always enabled and their device
 		directories will not contain this file.
 
-		For more information, see Documentation/usb/persist.txt.
+		For more information, see Documentation/driver-api/usb/persist.rst.
 
 What:		/sys/bus/usb/devices/.../power/autosuspend
 Date:		March 2007

Documentation/ABI/stable/vdso

@@ -16,7 +16,8 @@ The vDSO uses symbol versioning; whenever you request a symbol from the
 vDSO, specify the version you are expecting.
 
 Programs that dynamically link to glibc will use the vDSO automatically.
-Otherwise, you can use the reference parser in Documentation/vDSO/parse_vdso.c.
+Otherwise, you can use the reference parser in
+tools/testing/selftests/vDSO/parse_vdso.c.
 
 Unless otherwise noted, the set of symbols with any given version and the
 ABI of those symbols is considered stable.  It may vary across architectures,

Documentation/ABI/testing/sysfs-block

@@ -213,14 +213,8 @@ What:		/sys/block/<disk>/queue/discard_zeroes_data
 Date:		May 2011
 Contact:	Martin K. Petersen <[email protected]>
 Description:
-		Devices that support discard functionality may return
-		stale or random data when a previously discarded block
-		is read back. This can cause problems if the filesystem
-		expects discarded blocks to be explicitly cleared. If a
-		device reports that it deterministically returns zeroes
-		when a discarded area is read the discard_zeroes_data
-		parameter will be set to one. Otherwise it will be 0 and
-		the result of reading a discarded area is undefined.
+		Will always return 0.  Don't rely on any specific behavior
+		for discards, and don't read this file.
 
 What:		/sys/block/<disk>/queue/write_same_max_bytes
 Date:		January 2012

Documentation/ABI/testing/sysfs-bus-iio

@@ -55,6 +55,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
 KernelVersion:	2.6.35
@@ -1593,18 +1594,32 @@ Description:
 		can be processed to siemens per meter.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Raw counter device counts from channel Y. For quadrature
 		counters, multiplication by an available [Y]_scale results in
 		the counts of a single quadrature signal phase from channel Y.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Raw counter device index value from channel Y. This attribute
 		provides an absolute positional reference (e.g. a pulse once per
 		revolution) which may be used to home positional systems as
 		required.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		A list of possible counting directions which are:
+		- "up"	: counter device is increasing.
+		- "down": counter device is decreasing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Raw counter device counters direction for channel Y.

Documentation/ABI/testing/sysfs-bus-iio-adc-max9611

@@ -0,0 +1,17 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	[email protected]
+Description: 	The value of the shunt resistor used to compute power drain on
+                common input voltage pin (RS+). In Ohms.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	[email protected]
+Description: 	The value of the shunt resistor used to compute current flowing
+                between RS+ and RS- voltage sense inputs. In Ohms.
+
+These attributes describe a single physical component, exposed as two distinct
+attributes as it is used to calculate two different values: power load and
+current flowing between RS+ and RS- inputs.

Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8

@@ -1,24 +1,16 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Discrete set of available values for the respective counter
 		configuration are listed in this file.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
-KernelVersion:	4.9
-Contact:	[email protected]
-Description:
-		Read-only attribute that indicates whether the counter for
-		channel Y is counting up or down.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Count mode for channel Y. Four count modes are available:
@@ -52,22 +44,22 @@ Description:
 			continuously throughout.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Read-only attribute that indicates whether excessive noise is
 		present at the channel Y count inputs in quadrature clock mode;
 		irrelevant in non-quadrature clock mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		If the counter device supports preset registers, the preset
 		count for channel Y is provided by this attribute.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Configure channel Y counter for non-quadrature or quadrature
@@ -88,22 +80,22 @@ Description:
 			decoded for UP/DN clock.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Whether to set channel Y counter with channel Y preset value
 		when channel Y index input is active, or continuously count.
 		Valid attribute values are boolean.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Active level of channel Y index input; irrelevant in
 		non-synchronous load mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Configure channel Y counter for non-synchronous or synchronous

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -3,11 +3,15 @@ KernelVersion:	4.11
 Contact:	[email protected]
 Description:
 		Reading returns the list possible master modes which are:
-		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
-		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "reset"     :	The UG bit from the TIMx_EGR register is
+				used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used
+				as trigger output.
 		- "update"    : The update event is selected as trigger output.
-				For instance a master timer can then be used as a prescaler for a slave timer.
-		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+				For instance a master timer can then be used
+				as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse
+				    when the CC1IF flag is to be set.
 		- "OC1REF"    : OC1REF signal is used as trigger output.
 		- "OC2REF"    : OC2REF signal is used as trigger output.
 		- "OC3REF"    : OC3REF signal is used as trigger output.
@@ -27,3 +31,62 @@ Description:
 		Reading returns the current sampling frequency.
 		Writing an value different of 0 set and start sampling.
 		Writing 0 stop sampling.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Reading returns the current preset value.
+		Writing sets the preset value.
+		When counting up the counter starts from 0 and fires an
+		event when reach preset value.
+		When counting down the counter start from preset value
+		and fire event when reach 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Configure the device counter quadrature modes:
+		channel_A:
+			Encoder A input servers as the count input and B as
+			the UP/DOWN direction control input.
+
+		channel_B:
+			Encoder B input serves as the count input and A as
+			the UP/DOWN direction control input.
+
+		quadrature:
+			Encoder A and B inputs are mixed to get direction
+			and count with a scale of 0.25.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Reading returns the list possible enable modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Configure the device counter enable modes, in all case
+		counting direction is set by in_count0_count_direction
+		attribute and the counter is clocked by the internal clock.
+		always:
+			Counter is always ON.
+
+		gated:
+			Counting is enabled when connected trigger signal
+			level is high else counting is disabled.
+
+		triggered:
+			Counting is enabled on rising edge of the connected
+			trigger, and remains enabled for the duration of this
+			selected mode.

Documentation/ABI/testing/sysfs-bus-pci

@@ -299,5 +299,27 @@ What:		/sys/bus/pci/devices/.../revision
 Date:		November 2016
 Contact:	Emil Velikov <[email protected]>
 Description:
-		This file contains the revision field of the the PCI device.
+		This file contains the revision field of the PCI device.
 		The value comes from device config space. The file is read only.
+
+What:		/sys/bus/pci/devices/.../sriov_drivers_autoprobe
+Date:		April 2017
+Contact:	Bodong Wang<[email protected]>
+Description:
+		This file is associated with the PF of a device that
+		supports SR-IOV.  It determines whether newly-enabled VFs
+		are immediately bound to a driver.  It initially contains
+		1, which means the kernel automatically binds VFs to a
+		compatible driver immediately after they are enabled.  If
+		an application writes 0 to the file before enabling VFs,
+		the kernel will not bind VFs to a driver.
+
+		A typical use case is to write 0 to this file, then enable
+		VFs, then assign the newly-created VFs to virtual machines.
+		Note that changing this file does not affect already-
+		enabled VFs.  In this scenario, the user must first disable
+		the VFs, write 0 to sriov_drivers_autoprobe, then re-enable
+		the VFs.
+
+		This is similar to /sys/bus/pci/drivers_autoprobe, but
+		affects only the VFs associated with a specific PF.

Documentation/ABI/testing/sysfs-class-net-qmi

@@ -21,3 +21,30 @@ Description:
 		is responsible for coordination of driver and firmware
 		link framing mode, changing this setting to 'Y' if the
 		firmware is configured for 'raw-ip' mode.
+
+What:		/sys/class/net/<iface>/qmi/add_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <[email protected]>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 127 to add a qmap mux
+		based network device, supported by recent Qualcomm based
+		modems.
+
+		The network device will be called qmimux.
+
+		Userspace is in charge of managing the qmux network device
+		activation and data stream setup on the modem side by
+		using the proper QMI protocol requests.
+
+What:		/sys/class/net/<iface>/qmi/del_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <[email protected]>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 127 to delete a previously
+		created qmap mux based network device.