Fix a bug that causes iterator to return wrong result in a rare data …

…race (#6973)

Summary:
The bug fixed in #1816 is now applicable to iterator too. This was not an issue but #2886 caused the regression. If a put and DB flush happens just between iterator to get latest sequence number and getting super version, empty result for the key or an older value can be returned, which is wrong.
Fix it in the same way as the fix in #1816, that is to get the sequence number after referencing the super version.
Pull Request resolved: #6973

Test Plan: Will run stress tests for a while to make sure there is no general regression.

Reviewed By: ajkr

Differential Revision: D22029348

fbshipit-source-id: 94390f93630906796d6e2fec321f44a920953fd1

HISTORY.md

@@ -3,8 +3,8 @@
 ### Behavior Changes
 * Best-efforts recovery ignores CURRENT file completely. If CURRENT file is missing during recovery, best-efforts recovery still proceeds with MANIFEST file(s).
 * In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early.
-### Bug fixes
 * Compressed block cache was automatically disabled with read-only DBs by mistake. Now it is fixed: compressed block cache will be in effective with read-only DB too.
+* Fix a bug of wrong iterator result if another thread finishes an update and a DB flush between two statement.
 
 ### Public API Change
 * `DB::GetDbSessionId(std::string& session_id)` is added. `session_id` stores a unique identifier that gets reset every time the DB is opened. This DB session ID should be unique among all open DB instances on all hosts, and should be unique among re-openings of the same or other DBs. This identifier is recorded in the LOG file on the line starting with "DB Session ID:".
@@ -28,7 +28,6 @@
 * Fix false negative from the VerifyChecksum() API when there is a checksum mismatch in an index partition block in a BlockBasedTable format table file (index_type is kTwoLevelIndexSearch).
 * Fix sst_dump to return non-zero exit code if the specified file is not a recognized SST file or fails requested checks.
 * Fix incorrect results from batched MultiGet for duplicate keys, when the duplicate key matches the largest key of an SST file and the value type for the key in the file is a merge value.
-* Fix "bad block type" error from persistent cache on Windows.
 
 ### Public API Change
 * Flush(..., column_family) may return Status::ColumnFamilyDropped() instead of Status::InvalidArgument() if column_family is dropped while processing the flush request.

db/arena_wrapped_db_iter.cc

@@ -56,15 +56,17 @@ Status ArenaWrappedDBIter::Refresh() {
   // TODO(yiwu): For last_seq_same_as_publish_seq_==false, this is not the
   // correct behavior. Will be corrected automatically when we take a snapshot
   // here for the case of WritePreparedTxnDB.
-  SequenceNumber latest_seq = db_impl_->GetLatestSequenceNumber();
   uint64_t cur_sv_number = cfd_->GetSuperVersionNumber();
+  TEST_SYNC_POINT("ArenaWrappedDBIter::Refresh:1");
+  TEST_SYNC_POINT("ArenaWrappedDBIter::Refresh:2");
   if (sv_number_ != cur_sv_number) {
     Env* env = db_iter_->env();
     db_iter_->~DBIter();
     arena_.~Arena();
     new (&arena_) Arena();
 
     SuperVersion* sv = cfd_->GetReferencedSuperVersion(db_impl_);
+    SequenceNumber latest_seq = db_impl_->GetLatestSequenceNumber();
     if (read_callback_) {
       read_callback_->Refresh(latest_seq);
     }
@@ -78,7 +80,7 @@ Status ArenaWrappedDBIter::Refresh() {
         latest_seq, /* allow_unprepared_value */ true);
     SetIterUnderDBIter(internal_iter);
   } else {
-    db_iter_->set_sequence(latest_seq);
+    db_iter_->set_sequence(db_impl_->GetLatestSequenceNumber());
     db_iter_->set_valid(false);
   }
   return Status::OK();

db/db_impl/db_impl.cc

@@ -2671,7 +2671,8 @@ Iterator* DBImpl::NewIterator(const ReadOptions& read_options,
         " guaranteed to be preserved, try larger iter_start_seqnum opt."));
   }
   auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
-  auto cfd = cfh->cfd();
+  ColumnFamilyData* cfd = cfh->cfd();
+  assert(cfd != nullptr);
   ReadCallback* read_callback = nullptr;  // No read callback provided.
   if (read_options.tailing) {
 #ifdef ROCKSDB_LITE
@@ -2692,10 +2693,11 @@ Iterator* DBImpl::NewIterator(const ReadOptions& read_options,
     // Note: no need to consider the special case of
     // last_seq_same_as_publish_seq_==false since NewIterator is overridden in
     // WritePreparedTxnDB
-    auto snapshot = read_options.snapshot != nullptr
-                        ? read_options.snapshot->GetSequenceNumber()
-                        : versions_->LastSequence();
-    result = NewIteratorImpl(read_options, cfd, snapshot, read_callback);
+    result = NewIteratorImpl(read_options, cfd,
+                             (read_options.snapshot != nullptr)
+                                 ? read_options.snapshot->GetSequenceNumber()
+                                 : kMaxSequenceNumber,
+                             read_callback);
   }
   return result;
 }
@@ -2708,6 +2710,24 @@ ArenaWrappedDBIter* DBImpl::NewIteratorImpl(const ReadOptions& read_options,
                                             bool allow_refresh) {
   SuperVersion* sv = cfd->GetReferencedSuperVersion(this);
 
+  TEST_SYNC_POINT("DBImpl::NewIterator:1");
+  TEST_SYNC_POINT("DBImpl::NewIterator:2");
+
+  if (snapshot == kMaxSequenceNumber) {
+    // Note that the snapshot is assigned AFTER referencing the super
+    // version because otherwise a flush happening in between may compact away
+    // data for the snapshot, so the reader would see neither data that was be
+    // visible to the snapshot before compaction nor the newer data inserted
+    // afterwards.
+    // Note that the super version might not contain all the data available
+    // to this snapshot, but in that case it can see all the data in the
+    // super version, which is a valid consistent state after the user
+    // calls NewIterator().
+    snapshot = versions_->LastSequence();
+    TEST_SYNC_POINT("DBImpl::NewIterator:3");
+    TEST_SYNC_POINT("DBImpl::NewIterator:4");
+  }
+
   // Try to generate a DB iterator tree in continuous memory area to be
   // cache friendly. Here is an example of result:
   // +-------------------------------+

db/db_impl/db_impl.h

@@ -479,6 +479,7 @@ class DBImpl : public DB {
   Status GetImpl(const ReadOptions& options, const Slice& key,
                  GetImplOptions& get_impl_options);
 
+  // If `snapshot` == kMaxSequenceNumber, set a recent one inside the file.
   ArenaWrappedDBIter* NewIteratorImpl(const ReadOptions& options,
                                       ColumnFamilyData* cfd,
                                       SequenceNumber snapshot,

db/db_test2.cc

@@ -2957,6 +2957,94 @@ TEST_F(DBTest2, OptimizeForSmallDB) {
 
 #endif  // ROCKSDB_LITE
 
+TEST_F(DBTest2, IterRaceFlush1) {
+  ASSERT_OK(Put("foo", "v1"));
+
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
+      {{"DBImpl::NewIterator:1", "DBTest2::IterRaceFlush:1"},
+       {"DBTest2::IterRaceFlush:2", "DBImpl::NewIterator:2"}});
+
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
+
+  ROCKSDB_NAMESPACE::port::Thread t1([&] {
+    TEST_SYNC_POINT("DBTest2::IterRaceFlush:1");
+    ASSERT_OK(Put("foo", "v2"));
+    Flush();
+    TEST_SYNC_POINT("DBTest2::IterRaceFlush:2");
+  });
+
+  // iterator is created after the first Put(), so it should see either
+  // "v1" or "v2".
+  {
+    std::unique_ptr<Iterator> it(db_->NewIterator(ReadOptions()));
+    it->Seek("foo");
+    ASSERT_TRUE(it->Valid());
+    ASSERT_EQ("foo", it->key().ToString());
+  }
+
+  t1.join();
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
+}
+
+TEST_F(DBTest2, IterRaceFlush2) {
+  ASSERT_OK(Put("foo", "v1"));
+
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
+      {{"DBImpl::NewIterator:3", "DBTest2::IterRaceFlush2:1"},
+       {"DBTest2::IterRaceFlush2:2", "DBImpl::NewIterator:4"}});
+
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
+
+  ROCKSDB_NAMESPACE::port::Thread t1([&] {
+    TEST_SYNC_POINT("DBTest2::IterRaceFlush2:1");
+    ASSERT_OK(Put("foo", "v2"));
+    Flush();
+    TEST_SYNC_POINT("DBTest2::IterRaceFlush2:2");
+  });
+
+  // iterator is created after the first Put(), so it should see either
+  // "v1" or "v2".
+  {
+    std::unique_ptr<Iterator> it(db_->NewIterator(ReadOptions()));
+    it->Seek("foo");
+    ASSERT_TRUE(it->Valid());
+    ASSERT_EQ("foo", it->key().ToString());
+  }
+
+  t1.join();
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
+}
+
+TEST_F(DBTest2, IterRefreshRaceFlush) {
+  ASSERT_OK(Put("foo", "v1"));
+
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
+      {{"ArenaWrappedDBIter::Refresh:1", "DBTest2::IterRefreshRaceFlush:1"},
+       {"DBTest2::IterRefreshRaceFlush:2", "ArenaWrappedDBIter::Refresh:2"}});
+
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
+
+  ROCKSDB_NAMESPACE::port::Thread t1([&] {
+    TEST_SYNC_POINT("DBTest2::IterRefreshRaceFlush:1");
+    ASSERT_OK(Put("foo", "v2"));
+    Flush();
+    TEST_SYNC_POINT("DBTest2::IterRefreshRaceFlush:2");
+  });
+
+  // iterator is created after the first Put(), so it should see either
+  // "v1" or "v2".
+  {
+    std::unique_ptr<Iterator> it(db_->NewIterator(ReadOptions()));
+    it->Refresh();
+    it->Seek("foo");
+    ASSERT_TRUE(it->Valid());
+    ASSERT_EQ("foo", it->key().ToString());
+  }
+
+  t1.join();
+  ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
+}
+
 TEST_F(DBTest2, GetRaceFlush1) {
   ASSERT_OK(Put("foo", "v1"));