Structural conversion from anyhow errors #326
ten3robertsci.yml
on: pull_request
Miri
1m 7s
Matrix: Check
Matrix: Clippy
Matrix: Rustfmt
Matrix: Test Suite
Matrix: Test Suite
Matrix: Test Suite
Annotations
272 warnings
|
Rustfmt (stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Rustfmt (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Rustfmt (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Rustfmt (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Rustfmt (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Check (stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Check (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Check (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Check (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Check (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Check (stable):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Check (stable)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta, --features auto-install)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features auto-install):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (beta, --features auto-install)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta, --features auto-install):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (beta, --features auto-install)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (beta, --features auto-install)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable, --features track-caller)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (stable, --features track-caller):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (stable, --features track-caller)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (stable, --features track-caller):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (stable, --features track-caller)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (stable, --features track-caller)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Clippy (stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Clippy (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Clippy (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Clippy (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Clippy (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Clippy (stable)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable, --all-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (stable, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --all-features)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (beta)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (beta)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (beta)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (beta)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (stable):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (stable)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (stable):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (stable)
`eyre` (lib test) generated 1 warning (1 duplicate)
|
|
Test Suite (stable)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --no-default-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta, --no-default-features):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (beta, --no-default-features)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta, --no-default-features):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (beta, --no-default-features)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (beta, --no-default-features)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable, --features auto-install)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (beta, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install)
`eyre` (lib test) generated 1 warning (1 duplicate)
|
|
Test Suite (beta, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (stable, --features auto-install)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (stable, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --all-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --all-features)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (beta, --features track-caller)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features track-caller):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (beta, --features track-caller)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta, --features track-caller)
`eyre` (lib test) generated 1 warning (1 duplicate)
|
|
Test Suite (beta, --features track-caller)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (beta, --features track-caller)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (beta, --features pyo3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (beta, --features pyo3):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (beta, --features pyo3)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (beta, --features pyo3)
`eyre` (lib test) generated 1 warning (1 duplicate)
|
|
Test Suite (beta, --features pyo3)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (beta, --features pyo3)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (beta, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (beta, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (nightly):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (nightly)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (nightly)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (nightly):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features pyo3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (nightly, --features pyo3):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --features pyo3)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --features pyo3):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (nightly, --features pyo3)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (nightly, --features pyo3)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (nightly, --features pyo3):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --features pyo3)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features track-caller)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (nightly, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features track-caller):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --features track-caller)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --features track-caller):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (nightly, --features track-caller)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (nightly, --features track-caller)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (nightly, --features track-caller):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --features track-caller)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --no-default-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (nightly, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --no-default-features):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --no-default-features)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --no-default-features):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (nightly, --no-default-features)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (nightly, --no-default-features)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (nightly, --no-default-features):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --no-default-features)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --all-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (nightly, --all-features)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (nightly, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features auto-install)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (nightly, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (nightly, --features auto-install):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --features auto-install)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (nightly, --features auto-install):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (nightly, --features auto-install)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (nightly, --features auto-install)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (nightly, --features auto-install):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (nightly, --features auto-install)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (stable, --no-default-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (stable, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --no-default-features):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (stable, --no-default-features)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (stable, --no-default-features):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (stable, --no-default-features)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (stable, --no-default-features)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Miri
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Miri
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Miri
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Miri
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Miri
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Miri:
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Miri
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Miri
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Miri:
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Miri:
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (stable, --features pyo3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (stable, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features pyo3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (stable, --features pyo3):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (stable, --features pyo3)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (stable, --features pyo3):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (stable, --features pyo3)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (stable, --features pyo3)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (ubuntu-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (ubuntu-latest):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (ubuntu-latest)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (ubuntu-latest):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (ubuntu-latest)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (ubuntu-latest)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (ubuntu-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (ubuntu-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (ubuntu-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (ubuntu-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (macOS-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (macOS-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (macOS-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (macOS-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (macOS-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (macOS-latest):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (macOS-latest)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (macOS-latest):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (macOS-latest)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (macOS-latest)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (windows-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (windows-latest):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (windows-latest)
`eyre` (lib) generated 1 warning (run `cargo fix --lib -p eyre` to apply 1 suggestion)
|
|
Test Suite (windows-latest)
`eyre` (lib test) generated 1 warning (1 duplicate)
|
|
Test Suite (windows-latest)
`eyre` (test "test_anyhow_compat") generated 1 warning (run `cargo fix --test "test_anyhow_compat"` to apply 1 suggestion)
|
|
Test Suite (windows-latest)
the following packages contain code that will be rejected by a future version of Rust: nom v4.2.3
|
|
Test Suite (windows-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (windows-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (windows-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (windows-latest)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features track-caller)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (--features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features track-caller)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features track-caller):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (--features track-caller)
`eyre` (lib) generated 1 warning
|
|
Test Suite (--features track-caller)
`eyre` (lib test) generated 1 warning (1 duplicate)
|
|
Test Suite (--features track-caller)
`eyre` (test "test_anyhow_compat") generated 1 warning
|
|
Test Suite (--features auto-install)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (--features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features auto-install)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--features auto-install):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (--features auto-install)
`eyre` (lib) generated 1 warning
|
|
Test Suite (--features auto-install):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (--features auto-install)
`eyre` (test "test_anyhow_compat") generated 1 warning
|
|
Test Suite
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite:
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite
`eyre` (lib) generated 1 warning
|
|
Test Suite:
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite
`eyre` (test "test_anyhow_compat") generated 1 warning
|
|
Test Suite (--no-default-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Test Suite (--no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--no-default-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Test Suite (--no-default-features):
eyre/src/compat.rs#L1
unused import: `builder::ReportBuilder`
|
|
Test Suite (--no-default-features)
`eyre` (lib) generated 1 warning
|
|
Test Suite (--no-default-features):
eyre/tests/test_anyhow_compat.rs#L3
unused imports: `Report`, `compat::IntoEyre`
|
|
Test Suite (--no-default-features)
`eyre` (lib test) generated 1 warning (1 duplicate)
|