Sming is an asynchronous C/C++ framework with superb performance and multiple network features. Sming is open source and is tailored towards embedded devices. It supports multiple architectures as ESP8266 for example.
If you like Sming, give it a star, or fork it and contribute!
- Sming
- Table of Contents
Please note Version 4 documentation is at sming.readthedocs.io.
- Superb performance and memory usage (Sming compiles to native firmware!).
- Fast and user friendly development.
- Simple yet powerful hardware API wrappers.
- Compatible with standard Arduino Libraries - use any popular hardware in few lines of code.
- Built-in file system: spiffs.
- Built-in powerful wireless modules.
- Powerful asynchronous (async) network stack.
- Async TCP and UDP stack based on LWIP.
- With clients supporting: HTTP, MQTT, WebSockets and SMTP.
- And servers for: DNS, FTP, HTTP(+ WebSockets), Telnet.
- With SSL support for all network clients and servers. Based on axTLS and BearSSL.
- Out of the box support for OTA over HTTPS.
- ESP8266 specific features.
- Integrated boot loader rboot with support for 1MB ROMs, OTA firmware updating and ROM switching.
- Crash handlers for analyzing/handling system restarts due to fatal errors or WDT resets.
- PWM support based on Stefan Bruens PWM.
- Optional custom heap allocation based on Umm Malloc.
- Based on Espressif NONOS SDK. Officially suppored NON SDK version is >= 3.0.1.
- Support for a thin No-Wifi-SDK. Helpful when a project does not require WiFi (or networking) and reduces code size and memory usage signficantly.
- Linux/Windows features
- Sming has a host emulator that allows libraries and sample applications to be compiled on a Linux/Windows host system and be tested before uploading them to an actual microcontroller.
Your GCC compiler should be version 8 or newer! See the different architectures for details. Newer compilers
- contain bugfixes
- produce smaller and better code
- have features which facilitate code quality, ease of use, etc.
| OS/SDK | Linux | Mac OS X | Windows | FreeBSD-current |
|---|---|---|---|---|
| UDK (v1.5) | n/a | n/a | |
n/a |
| esp-open-sdk (v1.5.x **, v2.0.0 **, v3.0.x) | ☀️ | ☀️ | n/a | ☀️ |
- OS = Operating System.
- SDK = Software Development Kit.
- n/a = The selected SDK is not available on that OS.
- ** = not supported officially. Samples and library should compile and run but we recommend using version >= 3.0.3.
Linux and Windows OSes with gcc compilers are supported. Clang is NOT supported.
Supported SDK: ESP-IDF v4.1
- Sming V4.2.0 - great new features, performance and stability improvements.
- Sming V4.2.x is our LTS version which will be supported until the end of 2021.
To follow the latest development you will need to clone our develop branch:
git clone https://github.com/SmingHub/Sming.git
Sming supports multiple architectures. Choose the architecture of your choice to install the needed development software and toolchain(s).
You can also try Sming without installing anything locally. We have an interactive tutorial that can be run directly from your browser.
In addition to our online documentation, you can also generate a complete documentation locally by following these instructions.
The examples are a great way to learn the API and brush up your C/C++ knowledge. Once you have completed the installation of the development tools, you can get the latest source code.
git clone https://github.com/SmingHub/Sming.git
And check some of the examples.
- Basic Blink
- Simple GPIO input/output
- Start Serial communication
- Connect to WiFi
- Read DHT22 sensor
- HTTP Client
- OTA Application Update Based on rBoot
- HTTP Server
- Email Client
Blinking is something like the "Hello World" example for the embedded world. You can check it using the commands below:
cd Sming/samples
cd Basic_Blink
make # -- compiles the application
make flash # -- tries to upload the application to your ESP8266 device.
More information at Wiki Examples page.
#define LED_PIN 2 // GPIO2
...
pinMode(LED_PIN, OUTPUT);
digitalWrite(LED_PIN, HIGH);For a complete example take a look at the Basic_Blink sample.
Serial.begin(9600);
Serial.println("Hello Sming! Let's do smart things.");WifiStation.enable(true);
WifiStation.config("LOCAL-NETWORK", "123456789087"); // Put your SSID and password here#include <Libraries/DHTesp/DHTesp.h> // This is just a popular Arduino library!
#define DHT_PIN 0 // GPIO0
DHTesp dht;
void init()
{
dht.setup(DHT_PIN, DHTesp::DHT22);
float h = dht.getHumidity();
float t = dht.getTemperature();
}Take a look at the code of the Humidity_DHT22 sample.
HttpClient thingSpeak;
...
thingSpeak.downloadString("http://api.thingspeak.com/update?key=XXXXXXX&field1=" + String(sensorValue), onDataSent);
void onDataSent(HttpClient& client, bool successful)
{
if (successful) {
Serial.println("Successful!");
}
else {
Serial.println("Failed");
}
}For more examples take a look at the HttpClient, HttpClient_Instapush and HttpClient_ThingSpeak samples.
void OtaUpdate()
{
uint8 slot;
rboot_config bootconf;
Serial.println("Updating...");
// need a clean object, otherwise if run before and failed will not run again
if (otaUpdater) {
delete otaUpdater;
}
otaUpdater = new RbootHttpUpdater();
// select rom slot to flash
bootconf = rboot_get_config();
slot = bootconf.current_rom;
if (slot == 0) {
slot = 1;
}
else {
slot = 0;
}
// flash rom to position indicated in the rBoot config rom table
otaUpdater->addItem(bootconf.roms[slot], ROM_0_URL);
// and/or set a callback (called on failure or success without switching requested)
otaUpdater->setCallback(OtaUpdate_CallBack);
// start update
otaUpdater->start();
}For a complete example take a look at the Basic_rBoot sample.
server.listen(80);
server.paths.set("/", onIndex);
server.paths.set("/hello", onHello);
server.paths.setDefault(onFile);
Serial.println("=== WEB SERVER STARTED ===");
Serial.println(WifiStation.getIP());
...
void onIndex(HttpRequest &request, HttpResponse &response)
{
TemplateFileStream *tmpl = new TemplateFileStream("index.html");
auto &vars = tmpl->variables();
vars["counter"] = String(counter);
vars["IP"] = WifiStation.getIP().toString();
vars["MAC"] = WifiStation.getMAC();
response.sendTemplate(tmpl);
}
void onFile(HttpRequest &request, HttpResponse &response)
{
String file = request.getPath();
if (file[0] == '/')
file = file.substring(1);
response.setCache(86400, true);
response.sendFile(file);
}For more examples take a look at the HttpServer_ConfigNetwork, HttpServer_Bootstrap, HttpServer_WebSockets and HttpServer_AJAX samples.
SmtpClient emailClient;
emailClient.connect(Url("smtp://user:[email protected]"));
MailMessage* mail = new MailMessage();
mail->from = "developers@sming";
mail->to = "iot-developers@world";
mail->subject = "Greetings from Sming";
mail->setBody("Hello");
FileStream* file= new FileStream("image.png");
mail->addAttachment(file);
emailClient.onMessageSent(onMailSent);
emailClient.send(mail);
...
int onMailSent(SmtpClient& client, int code, char* status)
{
MailMessage* mail = client.getCurrentMessage();
...
if(!client.countPending()) {
client.quit();
}
return 0;
}
See the SmtpClient sample for details.
Applications based on Sming Framework that are flashed and running on an ESP8266 device can be debugged using interactive debuggers. In order to debug an application it has to be re-compiled with the ENABLE_GDB=1 directive. And then flashed on the device. As shown below:
cd $SMING_HOME/../samples/LiveDebug
make clean
make ENABLE_GDB=1
make flashapp # <-- this will update only the application firmware.
Once the debuggable application is flashed on the device the developers have to run GDB. The easiest way to run the command-line GDB is to execute the following command:
make gdb
Developers using Eclipse CDT can have debugging sessions like the one below:
See LiveDebug sample for details.
You can contribute to Sming by
- Providing Pull Requests with new features, bug fixes, new ideas, etc. See Contributing for details.
- Testing our latest source code and reporting issues.
- Supporting us financially to acquire hardware for testing and implementing or out of gratitude
We welcome financial contributions in full transparency on our open collective page. They help us improve the project and the community around it. If you would like to support us you can become a backer or a sponsor.
In addition to that anyone who is helping this project can file an expense. If the expense makes sense for the development of the community, it will be "merged" in the ledger of our open collective by the core contributors and the person who filed the expense will be reimbursed.
Thank you to all the people who have backed Sming
or sponsored it.
