Update bt lib for ESP32-C3 and ESP32-S3

- Add config to set duplicate scan list refresh period
- overwrite the oldest device infor if the list is full
- Fixed duplicate scan period is not accurate

components/bt/controller/esp32c3/Kconfig.in

@@ -280,6 +280,22 @@ config BT_CTRL_SCAN_DUPL_CACHE_SIZE
         Maximum number of devices which can be recorded in scan duplicate filter.
         When the maximum amount of device in the filter is reached, the cache will be refreshed.
 
+config BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+    int "Duplicate scan list refresh period"
+    depends on BT_CTRL_BLE_SCAN_DUPL
+    range 0 1000
+    default 0
+    help
+        If the period value is non-zero, the controller will periodically clear the device information
+        stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
+        until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
+        Host in advertising report events.
+        There are two scenarios where the ADV packet will be repeatedly reported:
+        1. The duplicate scan cache is full, the controller will delete the oldest device information and
+        add new device information.
+        2. When the refresh period is up, the controller will clear all device information and start filtering
+        again.
+
 config BT_CTRL_BLE_MESH_SCAN_DUPL_EN
     bool "Special duplicate scan mechanism for BLE Mesh scan"
     depends on BT_CTRL_BLE_SCAN_DUPL

components/bt/controller/esp32s3/Kconfig.in

@@ -297,6 +297,22 @@ config BT_CTRL_SCAN_DUPL_CACHE_SIZE
         Maximum number of devices which can be recorded in scan duplicate filter.
         When the maximum amount of device in the filter is reached, the cache will be refreshed.
 
+config BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+    int "Duplicate scan list refresh period"
+    depends on BT_CTRL_BLE_SCAN_DUPL
+    range 0 1000
+    default 0
+    help
+        If the period value is non-zero, the controller will periodically clear the device information
+        stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
+        until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
+        Host in advertising report events.
+        There are two scenarios where the ADV packet will be repeatedly reported:
+        1. The duplicate scan cache is full, the controller will delete the oldest device information and
+        add new device information.
+        2. When the refresh period is up, the controller will clear all device information and start filtering
+        again.
+
 config BT_CTRL_BLE_MESH_SCAN_DUPL_EN
     bool "Special duplicate scan mechanism for BLE Mesh scan"
     depends on BT_CTRL_BLE_SCAN_DUPL

components/bt/include/esp32c3/include/esp_bt.h

@@ -18,7 +18,7 @@ extern "C" {
 #endif
 
 #define ESP_BT_CTRL_CONFIG_MAGIC_VAL    0x5A5AA5A5
-#define ESP_BT_CTRL_CONFIG_VERSION      0x02209230
+#define ESP_BT_CTRL_CONFIG_VERSION      0x02212090
 
 #define ESP_BT_HCI_TL_MAGIC_VALUE   0xfadebead
 #define ESP_BT_HCI_TL_VERSION       0x00010000
@@ -129,6 +129,12 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     #define MESH_DUPLICATE_SCAN_CACHE_SIZE          0
 #endif
 
+#ifndef CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD 0
+#else
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#endif
+
 #ifdef CONFIG_BT_CTRL_AGC_RECORRECT_EN
 #define BT_CTRL_AGC_RECORRECT_EN  CONFIG_BT_CTRL_AGC_RECORRECT_EN
 #else
@@ -188,6 +194,7 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     .hw_recorrect_en = AGC_RECORRECT_EN,                                   \
     .cca_thresh = CONFIG_BT_CTRL_HW_CCA_VAL,                               \
     .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX,      \
+    .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD,             \
 }
 
 #else
@@ -256,6 +263,7 @@ typedef struct {
     uint8_t hw_recorrect_en;
     uint8_t cca_thresh;                     /*!< cca threshold*/
     uint16_t scan_backoff_upperlimitmax;    /*!< scan backoff upperlimitmax value */
+    uint16_t dup_list_refresh_period;       /*!< duplicate scan list refresh time */
 } esp_bt_controller_config_t;
 
 /**

components/bt/include/esp32s3/include/esp_bt.h

@@ -18,7 +18,7 @@ extern "C" {
 #endif
 
 #define ESP_BT_CTRL_CONFIG_MAGIC_VAL    0x5A5AA5A5
-#define ESP_BT_CTRL_CONFIG_VERSION      0x02209230
+#define ESP_BT_CTRL_CONFIG_VERSION      0x02212090
 
 #define ESP_BT_HCI_TL_MAGIC_VALUE   0xfadebead
 #define ESP_BT_HCI_TL_VERSION       0x00010000
@@ -129,6 +129,12 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     #define MESH_DUPLICATE_SCAN_CACHE_SIZE          0
 #endif
 
+#ifndef CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD 0
+#else
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#endif
+
 #ifdef CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX
 #define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX
 #else
@@ -187,6 +193,7 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     .hw_recorrect_en = AGC_RECORRECT_EN,                                   \
     .cca_thresh = CONFIG_BT_CTRL_HW_CCA_VAL,                               \
     .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX,      \
+    .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD,             \
 }
 
 #else
@@ -255,6 +262,7 @@ typedef struct {
     uint8_t hw_recorrect_en;
     uint8_t cca_thresh;                     /*!< cca threshold*/
     uint16_t scan_backoff_upperlimitmax;    /*!< scan backoff upperlimitmax value */
+    uint16_t dup_list_refresh_period;       /*!< duplicate scan list refresh time */
 } esp_bt_controller_config_t;
 
 /**