fix(all): unify default mosi level to low on all targets

components/hal/esp32/include/hal/spi_ll.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -41,6 +41,7 @@ extern "C" {
 
 #define SPI_LL_DMA_MAX_BIT_LEN    (1 << 24)    //reg len: 24 bits
 #define SPI_LL_CPU_MAX_BIT_LEN    (16 * 32)    //Fifo len: 16 words
+#define SPI_LL_MOSI_FREE_LEVEL    0            //Default level after bus initialized
 
 /**
  * The data structure holding calculated clock configuration. Since the
@@ -123,21 +124,21 @@ static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
 }
 
 /**
- * Trigger start of user-defined transaction for master.
+ * Apply the register configurations and wait until it's done
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_master_user_start(spi_dev_t *hw)
+static inline void spi_ll_apply_config(spi_dev_t *hw)
 {
-    hw->cmd.usr = 1;
+    // 32 don't need this option
 }
 
 /**
- * Trigger start of user-defined transaction for slave.
+ * Trigger start of user-defined transaction.
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_slave_user_start(spi_dev_t *hw)
+static inline void spi_ll_user_start(spi_dev_t *hw)
 {
     hw->cmd.usr = 1;
 }

components/hal/esp32c2/include/hal/spi_ll.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -40,6 +40,7 @@ extern "C" {
 
 #define SPI_LL_DMA_MAX_BIT_LEN    (1 << 18)    //reg len: 18 bits
 #define SPI_LL_CPU_MAX_BIT_LEN    (16 * 32)    //Fifo len: 16 words
+#define SPI_LL_MOSI_FREE_LEVEL    1            //Default level after bus initialized
 
 /**
  * The data structure holding calculated clock configuration. Since the
@@ -186,36 +187,44 @@ static inline void spi_ll_slave_hd_init(spi_dev_t *hw)
 }
 
 /**
- * Check whether user-defined transaction is done.
+ * Determine and unify the default level of mosi line when bus free
  *
  * @param hw Beginning address of the peripheral registers.
- *
- * @return   True if transaction is done, otherwise false.
  */
-static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+static inline void spi_ll_set_mosi_free_level(spi_dev_t *hw, bool level)
 {
-    return hw->dma_int_raw.trans_done;
+    hw->ctrl.d_pol = level;     //set default level for MOSI only on IDLE state
 }
 
 /**
- * Trigger start of user-defined transaction for master.
- * The synchronization between two clock domains is required in ESP32-S3
+ * Apply the register configurations and wait until it's done
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_master_user_start(spi_dev_t *hw)
+static inline void spi_ll_apply_config(spi_dev_t *hw)
 {
     hw->cmd.update = 1;
-    while (hw->cmd.update);
-    hw->cmd.usr = 1;
+    while (hw->cmd.update);    //waiting config applied
+}
+
+/**
+ * Check whether user-defined transaction is done.
+ *
+ * @param hw Beginning address of the peripheral registers.
+ *
+ * @return   True if transaction is done, otherwise false.
+ */
+static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+{
+    return hw->dma_int_raw.trans_done;
 }
 
 /**
- * Trigger start of user-defined transaction for slave.
+ * Trigger start of user-defined transaction.
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_slave_user_start(spi_dev_t *hw)
+static inline void spi_ll_user_start(spi_dev_t *hw)
 {
     hw->cmd.usr = 1;
 }

components/hal/esp32c3/include/hal/spi_ll.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -40,6 +40,7 @@ extern "C" {
 
 #define SPI_LL_DMA_MAX_BIT_LEN    (1 << 18)    //reg len: 18 bits
 #define SPI_LL_CPU_MAX_BIT_LEN    (16 * 32)    //Fifo len: 16 words
+#define SPI_LL_MOSI_FREE_LEVEL    1            //Default level after bus initialized
 
 /**
  * The data structure holding calculated clock configuration. Since the
@@ -186,36 +187,44 @@ static inline void spi_ll_slave_hd_init(spi_dev_t *hw)
 }
 
 /**
- * Check whether user-defined transaction is done.
+ * Determine and unify the default level of mosi line when bus free
  *
  * @param hw Beginning address of the peripheral registers.
- *
- * @return   True if transaction is done, otherwise false.
  */
-static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+static inline void spi_ll_set_mosi_free_level(spi_dev_t *hw, bool level)
 {
-    return hw->dma_int_raw.trans_done;
+    hw->ctrl.d_pol = level;     //set default level for MOSI only on IDLE state
 }
 
 /**
- * Trigger start of user-defined transaction for master.
- * The synchronization between two clock domains is required in ESP32-S3
+ * Apply the register configurations and wait until it's done
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_master_user_start(spi_dev_t *hw)
+static inline void spi_ll_apply_config(spi_dev_t *hw)
 {
     hw->cmd.update = 1;
-    while (hw->cmd.update);
-    hw->cmd.usr = 1;
+    while (hw->cmd.update);    //waiting config applied
+}
+
+/**
+ * Check whether user-defined transaction is done.
+ *
+ * @param hw Beginning address of the peripheral registers.
+ *
+ * @return   True if transaction is done, otherwise false.
+ */
+static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+{
+    return hw->dma_int_raw.trans_done;
 }
 
 /**
- * Trigger start of user-defined transaction for slave.
+ * Trigger start of user-defined transaction.
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_slave_user_start(spi_dev_t *hw)
+static inline void spi_ll_user_start(spi_dev_t *hw)
 {
     hw->cmd.usr = 1;
 }

components/hal/esp32c6/include/hal/spi_ll.h

@@ -41,6 +41,7 @@ extern "C" {
 
 #define SPI_LL_DMA_MAX_BIT_LEN    (1 << 18)    //reg len: 18 bits
 #define SPI_LL_CPU_MAX_BIT_LEN    (16 * 32)    //Fifo len: 16 words
+#define SPI_LL_MOSI_FREE_LEVEL    1            //Default level after bus initialized
 
 /**
  * The data structure holding calculated clock configuration. Since the
@@ -190,36 +191,44 @@ static inline void spi_ll_slave_hd_init(spi_dev_t *hw)
 }
 
 /**
- * Check whether user-defined transaction is done.
+ * Determine and unify the default level of mosi line when bus free
  *
  * @param hw Beginning address of the peripheral registers.
- *
- * @return   True if transaction is done, otherwise false.
  */
-static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+static inline void spi_ll_set_mosi_free_level(spi_dev_t *hw, bool level)
 {
-    return hw->dma_int_raw.trans_done;
+    hw->ctrl.d_pol = level;     //set default level for MOSI only on IDLE state
 }
 
 /**
- * Trigger start of user-defined transaction for master.
- * The synchronization between two clock domains is required in ESP32-S3
+ * Apply the register configurations and wait until it's done
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_master_user_start(spi_dev_t *hw)
+static inline void spi_ll_apply_config(spi_dev_t *hw)
 {
     hw->cmd.update = 1;
-    while (hw->cmd.update);
-    hw->cmd.usr = 1;
+    while (hw->cmd.update);    //waiting config applied
+}
+
+/**
+ * Check whether user-defined transaction is done.
+ *
+ * @param hw Beginning address of the peripheral registers.
+ *
+ * @return   True if transaction is done, otherwise false.
+ */
+static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+{
+    return hw->dma_int_raw.trans_done;
 }
 
 /**
- * Trigger start of user-defined transaction for slave.
+ * Trigger start of user-defined transaction.
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_slave_user_start(spi_dev_t *hw)
+static inline void spi_ll_user_start(spi_dev_t *hw)
 {
     hw->cmd.usr = 1;
 }

components/hal/esp32h2/include/hal/spi_ll.h

@@ -43,6 +43,7 @@ extern "C" {
 
 #define SPI_LL_DMA_MAX_BIT_LEN    (1 << 18)    //reg len: 18 bits
 #define SPI_LL_CPU_MAX_BIT_LEN    (16 * 32)    //Fifo len: 16 words
+#define SPI_LL_MOSI_FREE_LEVEL    1            //Default level after bus initialized
 
 /**
  * The data structure holding calculated clock configuration. Since the
@@ -192,36 +193,44 @@ static inline void spi_ll_slave_hd_init(spi_dev_t *hw)
 }
 
 /**
- * Check whether user-defined transaction is done.
+ * Determine and unify the default level of mosi line when bus free
  *
  * @param hw Beginning address of the peripheral registers.
- *
- * @return   True if transaction is done, otherwise false.
  */
-static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+static inline void spi_ll_set_mosi_free_level(spi_dev_t *hw, bool level)
 {
-    return hw->dma_int_raw.trans_done_int_raw;
+    hw->ctrl.d_pol = level;     //set default level for MOSI only on IDLE state
 }
 
 /**
- * Trigger start of user-defined transaction for master.
- * The synchronization between two clock domains is required in ESP32-S3
+ * Apply the register configurations and wait until it's done
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_master_user_start(spi_dev_t *hw)
+static inline void spi_ll_apply_config(spi_dev_t *hw)
 {
     hw->cmd.update = 1;
-    while (hw->cmd.update);
-    hw->cmd.usr = 1;
+    while (hw->cmd.update);    //waiting config applied
+}
+
+/**
+ * Check whether user-defined transaction is done.
+ *
+ * @param hw Beginning address of the peripheral registers.
+ *
+ * @return   True if transaction is done, otherwise false.
+ */
+static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+{
+    return hw->dma_int_raw.trans_done_int_raw;
 }
 
 /**
- * Trigger start of user-defined transaction for slave.
+ * Trigger start of user-defined transaction.
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_slave_user_start(spi_dev_t *hw)
+static inline void spi_ll_user_start(spi_dev_t *hw)
 {
     hw->cmd.usr = 1;
 }

components/hal/esp32s2/include/hal/spi_ll.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -43,6 +43,7 @@ extern "C" {
 
 #define SPI_LL_DMA_MAX_BIT_LEN    (1 << 23)    //reg len: 23 bits
 #define SPI_LL_CPU_MAX_BIT_LEN    (18 * 32)    //Fifo len: 18 words
+#define SPI_LL_MOSI_FREE_LEVEL    1            //Default level after bus initialized
 
 /**
  * The data structure holding calculated clock configuration. Since the
@@ -176,33 +177,43 @@ static inline void spi_ll_slave_hd_init(spi_dev_t *hw)
 }
 
 /**
- * Check whether user-defined transaction is done.
+ * Determine and unify the default level of mosi line when bus free
  *
  * @param hw Beginning address of the peripheral registers.
+ */
+static inline void spi_ll_set_mosi_free_level(spi_dev_t *hw, bool level)
+{
+    hw->ctrl.d_pol = level;     //set default level for MOSI only on IDLE state
+}
+
+/**
+ * Apply the register configurations and wait until it's done
  *
- * @return true if transaction is done, otherwise false.
+ * @param hw Beginning address of the peripheral registers.
  */
-static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
+static inline void spi_ll_apply_config(spi_dev_t *hw)
 {
-    return hw->slave.trans_done;
+    // S2 don't need this option
 }
 
 /**
- * Trigger start of user-defined transaction for master.
+ * Check whether user-defined transaction is done.
  *
  * @param hw Beginning address of the peripheral registers.
+ *
+ * @return true if transaction is done, otherwise false.
  */
-static inline void spi_ll_master_user_start(spi_dev_t *hw)
+static inline bool spi_ll_usr_is_done(spi_dev_t *hw)
 {
-    hw->cmd.usr = 1;
+    return hw->slave.trans_done;
 }
 
 /**
- * Trigger start of user-defined transaction for slave.
+ * Trigger start of user-defined transaction.
  *
  * @param hw Beginning address of the peripheral registers.
  */
-static inline void spi_ll_slave_user_start(spi_dev_t *hw)
+static inline void spi_ll_user_start(spi_dev_t *hw)
 {
     hw->cmd.usr = 1;
 }