docs: Fix Secure DL mode documentation about flash read being unsuppo…

…rted

Simple flash read command is not supported if Secure DL mode is enabled on the target.
Remove reference of this from the relevant docs part.

Related: espressif/esptool#810
Related: ESPTOOL-567
Closes IDF-6468

components/bootloader/Kconfig.projbuild

@@ -997,9 +997,9 @@ menu "Security features"
                 Download Mode into a separate Secure Download mode. This option can only work if
                 Download Mode is not already disabled by eFuse.
 
-                Secure Download mode limits the use of Download Mode functions to simple flash read,
-                write and erase operations, plus a command to return a summary of currently enabled
-                security features.
+                Secure Download mode limits the use of Download Mode functions to update SPI config,
+                changing baud rate, basic flash write and a command to return a summary of currently
+                enabled security features (`get_security_info`).
 
                 Secure Download mode is not compatible with the esptool.py flasher stub feature,
                 espefuse.py, read/writing memory or registers, encrypted download, or any other

docs/en/security/flash-encryption.rst

@@ -544,7 +544,7 @@ When using Flash Encryption in production:
 
    - Do not reuse the same flash encryption key between multiple devices. This means that an attacker who copies encrypted data from one device cannot transfer it to a second device.
    :esp32: - When using ESP32 V3, if the UART ROM Download Mode is not needed for a production device then it should be disabled to provide an extra level of protection. Do this by calling :cpp:func:`esp_efuse_disable_rom_download_mode` during application startup. Alternatively, configure the project :ref:`CONFIG_ESP32_REV_MIN` level to 3 (targeting ESP32 V3 only) and select the :ref:`CONFIG_SECURE_UART_ROM_DL_MODE` to "Permanently disable ROM Download Mode (recommended)". The ability to disable ROM Download Mode is not available on earlier ESP32 versions.
-   :not esp32: - The UART ROM Download Mode should be disabled entirely if it is not needed, or permanently set to "Secure Download Mode" otherwise. Secure Download Mode permanently limits the available commands to basic flash read and write only. The default behaviour is to set Secure Download Mode on first boot in Release mode. To disable Download Mode entirely select select the :ref:`CONFIG_SECURE_UART_ROM_DL_MODE` to "Permanently disable ROM Download Mode (recommended)" or call :cpp:func:`esp_efuse_disable_rom_download_mode` at runtime.
+   :not esp32: - The UART ROM Download Mode should be disabled entirely if it is not needed, or permanently set to "Secure Download Mode" otherwise. Secure Download Mode permanently limits the available commands to update SPI config, changing baud rate, basic flash write and a command to return a summary of currently enabled security features (`get_security_info`). The default behaviour is to set Secure Download Mode on first boot in Release mode. To disable Download Mode entirely select select the :ref:`CONFIG_SECURE_UART_ROM_DL_MODE` to "Permanently disable ROM Download Mode (recommended)" or call :cpp:func:`esp_efuse_disable_rom_download_mode` at runtime.
    - Enable :doc:`Secure Boot <secure-boot-v2>` as an extra layer of protection, and to prevent an attacker from selectively corrupting any part of the flash before boot.
 
 Possible Failures

docs/en/security/security.rst

@@ -108,13 +108,13 @@ UART DL Mode
     .. important::
         If UART Download mode is disabled then ``esptool`` can not work on the device.
 
-.. only:: not esp32
+.. only:: SOC_SUPPORTS_SECURE_DL_MODE
 
     In {IDF_TARGET_NAME}, Secure UART Download mode gets activated if any of the security features are enabled.
 
     * Secure UART Download mode can also be enabled by calling :cpp:func:`esp_efuse_enable_rom_secure_download_mode`.
     * This mode does not allow any arbitrary code to execute if downloaded through the UART download mode.
-    * It also limits the available commands in Download mode to basic flash read and write, plus a command to return a summary of currently enabled security features.
+    * It also limits the available commands in Download mode to update SPI config, changing baud rate, basic flash write and a command to return a summary of currently enabled security features (`get_security_info`).
     * To disable Download Mode entirely select the :ref:`CONFIG_SECURE_UART_ROM_DL_MODE` to "Permanently disable ROM Download Mode (recommended)" or call :cpp:func:`esp_efuse_disable_rom_download_mode` at runtime.
 
     .. important::