fix(pre-commit): Fix and apply pre-commit hooks

.pre-commit-config.yaml

@@ -26,6 +26,7 @@ repos:
       - id: trailing-whitespace
         args: [--markdown-linebreak-ext=md]
       - id: pretty-format-json
+        stages: [manual]
         args: [--autofix]
         types_or: [json]
         exclude: |

cores/esp32/esp32-hal-tinyusb.c

@@ -287,15 +287,14 @@ enum {
   VENDOR_REQUEST_MICROSOFT = 2
 };
 
-static uint8_t const tinyusb_bos_descriptor[] = {
-  // total length, number of device caps
-  TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 2),
+static uint8_t const tinyusb_bos_descriptor[] = {// total length, number of device caps
+                                                 TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 2),
 
-  // Vendor Code, iLandingPage
-  TUD_BOS_WEBUSB_DESCRIPTOR(VENDOR_REQUEST_WEBUSB, 1),
+                                                 // Vendor Code, iLandingPage
+                                                 TUD_BOS_WEBUSB_DESCRIPTOR(VENDOR_REQUEST_WEBUSB, 1),
 
-  // Microsoft OS 2.0 descriptor
-  TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, VENDOR_REQUEST_MICROSOFT)
+                                                 // Microsoft OS 2.0 descriptor
+                                                 TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, VENDOR_REQUEST_MICROSOFT)
 };
 
 /*
@@ -831,7 +830,7 @@ esp_err_t tinyusb_init(tinyusb_device_config_t *config) {
     periph_ll_enable_clk_clear_rst(PERIPH_USB_MODULE);
   }
 #endif
-  
+
   tinyusb_config_t tusb_cfg = {
     .external_phy = false  // In the most cases you need to use a `false` value
   };

libraries/Matter/examples/MatterCommissionTest/MatterCommissionTest.ino

@@ -1,65 +1,65 @@
-// Matter Manager
-#include <Matter.h>
-#include <WiFi.h>
-
-// List of Matter Endpoints for this Node
-// On/Off Light Endpoint
-#include <MatterOnOffLight.h>
-MatterOnOffLight OnOffLight;
-
-// WiFi is manually set and started
-
-const char *ssid = "your-ssid";          // Change this to your WiFi SSID
-const char *password = "your-password";  // Change this to your WiFi password
-
-void setup() {
-  Serial.begin(115200);
-  while (!Serial) {
-    delay(100);
-  }
-
-  // We start by connecting to a WiFi network
-  Serial.print("Connecting to ");
-  Serial.println(ssid);
-  // enable IPv6
-  WiFi.enableIPv6(true);
-  // Manually connect to WiFi
-  WiFi.begin(ssid, password);
-  // Wait for connection
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(500);
-    Serial.print(".");
-  }
-  Serial.println("\r\nWiFi connected");
-  Serial.println("IP address: ");
-  Serial.println(WiFi.localIP());
-  delay(500);
-
-  // Initialize at least one Matter EndPoint
-  OnOffLight.begin();
-  
-  // Matter begining - Last step, after all EndPoints are initialized
-  Matter.begin();
-}
-
-void loop() {
-  // Check Matter Commissioning state
-  if (!Matter.isDeviceCommissioned()) {
-    Serial.println("");
-    Serial.println("Matter Node is not commissioned yet.");
-    Serial.println("Initiate the device discovery in your Matter environment.");
-    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
-    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
-    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
-    // waits for Matter Light Commissioning.
-    while (!Matter.isDeviceCommissioned()) {
-      delay(5000);
-      Serial.println("Matter Fabric not commissioned yet. Waiting for commissioning.");
-    }
-  }
-  Serial.println("Matter Node is commissioned and connected to Wi-Fi.");
-  Serial.println("====> Decommissioning in 30 seconds. <====");
-  delay(30000);
-  Matter.decommission();
-  Serial.println("Matter Node is decommissioned. Commsssioning widget shall start over.");
-}
+// Matter Manager
+#include <Matter.h>
+#include <WiFi.h>
+
+// List of Matter Endpoints for this Node
+// On/Off Light Endpoint
+#include <MatterOnOffLight.h>
+MatterOnOffLight OnOffLight;
+
+// WiFi is manually set and started
+
+const char *ssid = "your-ssid";          // Change this to your WiFi SSID
+const char *password = "your-password";  // Change this to your WiFi password
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial) {
+    delay(100);
+  }
+
+  // We start by connecting to a WiFi network
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+  // enable IPv6
+  WiFi.enableIPv6(true);
+  // Manually connect to WiFi
+  WiFi.begin(ssid, password);
+  // Wait for connection
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("\r\nWiFi connected");
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+  delay(500);
+
+  // Initialize at least one Matter EndPoint
+  OnOffLight.begin();
+
+  // Matter beginning - Last step, after all EndPoints are initialized
+  Matter.begin();
+}
+
+void loop() {
+  // Check Matter Commissioning state
+  if (!Matter.isDeviceCommissioned()) {
+    Serial.println("");
+    Serial.println("Matter Node is not commissioned yet.");
+    Serial.println("Initiate the device discovery in your Matter environment.");
+    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
+    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
+    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
+    // waits for Matter Light Commissioning.
+    while (!Matter.isDeviceCommissioned()) {
+      delay(5000);
+      Serial.println("Matter Fabric not commissioned yet. Waiting for commissioning.");
+    }
+  }
+  Serial.println("Matter Node is commissioned and connected to Wi-Fi.");
+  Serial.println("====> Decommissioning in 30 seconds. <====");
+  delay(30000);
+  Matter.decommission();
+  Serial.println("Matter Node is decommissioned. Commsssioning widget shall start over.");
+}

libraries/Matter/examples/MatterCommissionTest/ci.json

@@ -1,8 +1,7 @@
-{
-  "fqbn_append": "PartitionScheme=huge_app",
-  "requires": [
-    "CONFIG_SOC_WIFI_SUPPORTED=y",
-    "CONFIG_ESP_MATTER_ENABLE_DATA_MODEL=y"
-  ]
-}
-
+{
+  "fqbn_append": "PartitionScheme=huge_app",
+  "requires": [
+    "CONFIG_SOC_WIFI_SUPPORTED=y",
+    "CONFIG_ESP_MATTER_ENABLE_DATA_MODEL=y"
+  ]
+}

libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino

@@ -1,94 +1,94 @@
-// Matter Manager
-#include <Matter.h>
-#include <WiFi.h>
-
-// List of Matter Endpoints for this Node
-// There will be 3 On/Off Light Endpoints in the same Node
-#include <MatterOnOffLight.h>
-MatterOnOffLight OnOffLight1;
-MatterOnOffLight OnOffLight2;
-MatterOnOffLight OnOffLight3;
-
-// Matter Protocol Endpoint Callback for each Light Accessory
-bool setLightOnOff1(bool state) {
-  Serial.printf("CB-Light1 changed state to: %s\r\n", state ? "ON" : "OFF");
-  return true;
-}
-
-bool setLightOnOff2(bool state) {
-  Serial.printf("CB-Light2 changed state to: %s\r\n", state ? "ON" : "OFF");
-  return true;
-}
-
-bool setLightOnOff3(bool state) {
-  Serial.printf("CB-Light3 changed state to: %s\r\n", state ? "ON" : "OFF");
-  return true;
-}
-
-// WiFi is manually set and started
-
-const char *ssid = "your-ssid";          // Change this to your WiFi SSID
-const char *password = "your-password";  // Change this to your WiFi password
-
-void setup() {
-  Serial.begin(115200);
-  while (!Serial) {
-    delay(100);
-  }
-
-  // We start by connecting to a WiFi network
-  Serial.print("Connecting to ");
-  Serial.println(ssid);
-  // enable IPv6
-  WiFi.enableIPv6(true);
-  // Manually connect to WiFi
-  WiFi.begin(ssid, password);
-  // Wait for connection
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(500);
-    Serial.print(".");
-  }
-  Serial.println("\r\nWiFi connected");
-  Serial.println("IP address: ");
-  Serial.println(WiFi.localIP());
-  delay(500);
-
-  // Initialize all 3 Matter EndPoints
-  OnOffLight1.begin();
-  OnOffLight2.begin();
-  OnOffLight3.begin();
-  OnOffLight1.onChangeOnOff(setLightOnOff1);
-  OnOffLight2.onChangeOnOff(setLightOnOff2);
-  OnOffLight3.onChangeOnOff(setLightOnOff3);
-
-  // Matter begining - Last step, after all EndPoints are initialized
-  Matter.begin();
-}
-
-void loop() {
-  // Check Matter Light Commissioning state
-  if (!Matter.isDeviceCommissioned()) {
-    Serial.println("");
-    Serial.println("Matter Node is not commissioned yet.");
-    Serial.println("Initiate the device discovery in your Matter environment.");
-    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
-    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
-    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
-    // waits for Matter Light Commissioning.
-    uint32_t timeCount = 0;
-    while (!Matter.isDeviceCommissioned()) {
-      delay(100);
-      if ((timeCount++ % 50) == 0) { // 50*100ms = 5 sec
-        Serial.println("Matter Node not commissioned yet. Waiting for commissioning.");
-      }
-    }
-    Serial.println("Matter Node is commissioned and connected to Wi-Fi. Ready for use.");
-  }
-
-  //displays the Light state every 3 seconds
-  Serial.println("======================");
-  Serial.printf("Matter Light #1 is %s\r\n", OnOffLight1.getOnOff() ? "ON" : "OFF");
-  Serial.printf("Matter Light #2 is %s\r\n", OnOffLight2.getOnOff() ? "ON" : "OFF");
-  Serial.printf("Matter Light #3 is %s\r\n", OnOffLight3.getOnOff() ? "ON" : "OFF");
-  delay(3000);
-}
+// Matter Manager
+#include <Matter.h>
+#include <WiFi.h>
+
+// List of Matter Endpoints for this Node
+// There will be 3 On/Off Light Endpoints in the same Node
+#include <MatterOnOffLight.h>
+MatterOnOffLight OnOffLight1;
+MatterOnOffLight OnOffLight2;
+MatterOnOffLight OnOffLight3;
+
+// Matter Protocol Endpoint Callback for each Light Accessory
+bool setLightOnOff1(bool state) {
+  Serial.printf("CB-Light1 changed state to: %s\r\n", state ? "ON" : "OFF");
+  return true;
+}
+
+bool setLightOnOff2(bool state) {
+  Serial.printf("CB-Light2 changed state to: %s\r\n", state ? "ON" : "OFF");
+  return true;
+}
+
+bool setLightOnOff3(bool state) {
+  Serial.printf("CB-Light3 changed state to: %s\r\n", state ? "ON" : "OFF");
+  return true;
+}
+
+// WiFi is manually set and started
+
+const char *ssid = "your-ssid";          // Change this to your WiFi SSID
+const char *password = "your-password";  // Change this to your WiFi password
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial) {
+    delay(100);
+  }
+
+  // We start by connecting to a WiFi network
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+  // enable IPv6
+  WiFi.enableIPv6(true);
+  // Manually connect to WiFi
+  WiFi.begin(ssid, password);
+  // Wait for connection
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("\r\nWiFi connected");
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+  delay(500);
+
+  // Initialize all 3 Matter EndPoints
+  OnOffLight1.begin();
+  OnOffLight2.begin();
+  OnOffLight3.begin();
+  OnOffLight1.onChangeOnOff(setLightOnOff1);
+  OnOffLight2.onChangeOnOff(setLightOnOff2);
+  OnOffLight3.onChangeOnOff(setLightOnOff3);
+
+  // Matter beginning - Last step, after all EndPoints are initialized
+  Matter.begin();
+}
+
+void loop() {
+  // Check Matter Light Commissioning state
+  if (!Matter.isDeviceCommissioned()) {
+    Serial.println("");
+    Serial.println("Matter Node is not commissioned yet.");
+    Serial.println("Initiate the device discovery in your Matter environment.");
+    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
+    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
+    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
+    // waits for Matter Light Commissioning.
+    uint32_t timeCount = 0;
+    while (!Matter.isDeviceCommissioned()) {
+      delay(100);
+      if ((timeCount++ % 50) == 0) {  // 50*100ms = 5 sec
+        Serial.println("Matter Node not commissioned yet. Waiting for commissioning.");
+      }
+    }
+    Serial.println("Matter Node is commissioned and connected to Wi-Fi. Ready for use.");
+  }
+
+  //displays the Light state every 3 seconds
+  Serial.println("======================");
+  Serial.printf("Matter Light #1 is %s\r\n", OnOffLight1.getOnOff() ? "ON" : "OFF");
+  Serial.printf("Matter Light #2 is %s\r\n", OnOffLight2.getOnOff() ? "ON" : "OFF");
+  Serial.printf("Matter Light #3 is %s\r\n", OnOffLight3.getOnOff() ? "ON" : "OFF");
+  delay(3000);
+}

libraries/Matter/examples/MatterComposedLights/ci.json

@@ -1,7 +1,7 @@
-{
-    "fqbn_append": "PartitionScheme=huge_app",
-    "requires": [
-      "CONFIG_SOC_WIFI_SUPPORTED=y",
-      "CONFIG_ESP_MATTER_ENABLE_DATA_MODEL=y"
-    ]
-}  
+{
+  "fqbn_append": "PartitionScheme=huge_app",
+  "requires": [
+    "CONFIG_SOC_WIFI_SUPPORTED=y",
+    "CONFIG_ESP_MATTER_ENABLE_DATA_MODEL=y"
+  ]
+}