[alpha] Move from devel (#4059)

* Change version to alpha (#3926)

Co-authored-by: Alexey Sharp <[email protected]>
Co-authored-by: Alex Sharp <[email protected]>

* docs: update libmdbx links (#3929)

* Makefile: refactor build flags and fix 1.17 (#3930)

* Fix some cli flag descriptions (#3933)

* Fix some cli flag descriptions

* add node about verbosity

* min requirement to go 1.18 (#3934)

* save

* save

* save

* Added Ethstats service (#3931)

* somewhat there but not yet

* lol

* more efficient ethstats

* lint

* not die on no wifi

* Update bor mumbai config (#3937)

* Update ci.yml (#3936)

* Use heimdall url in integration bor consensus (#3940)

* Downloader: re-use flags defaults (#3941)

* torrent: print peers amount in logs (#3942)

* Observer - P2P network crawler (#3928)

Observer crawls the Ethereum network and collects information about the nodes.

* Torrent conns print (#3943)

* save

* save

* [erigon2] Fuzz tests for commitment (#3939)

* [erigon2] Fuzz tests for commitment

* Cleanup

* Update to erigon-lib main

Co-authored-by: Alexey Sharp <[email protected]>

* Introduce unlimited download rate (#3945)

* Introduce unlimited download rate

* More generous burst

Co-authored-by: Alexey Sharp <[email protected]>

* Replace ioutil with io and os (#3946)

* Sentry GRPC: rename Peers to PeerEvents (#3944)

* Sentry GRPC: rename Peers to PeerEvents

see erigontech/interfaces#101

* Update to erigon-lib main

Co-authored-by: Alexey Sharp <[email protected]>

* cleaned up forkchoices db insertions #3949

* fixed ethstats (#3951)

* bsc: disable snap sync (#3955)

* bsc: disable snap sync (#3956)

* Snapshots: support empty buf case (#3957)

* Snapshots: rare nil pointer at fresh start (#3958)

* got rid of the automatic usage of net api (#3952)

* got rid of the automatic usage of net api

* less confusing comment

* ops

* ops2

* important

* ops

* RPC: admin.peers() (#3960)

* RPC: admin.peers()

This RPC method returns information about the connected remote nodes.
https://geth.ethereum.org/docs/rpc/ns-admin#admin_peers

The peers are collected from all configured sentries.
See: erigontech/interfaces#102

Test with:
curl -X POST -H "Content-Type: application/json" --data '{"jsonrpc": "2.0", "method": "admin_peers", "params": [], "id":1}' localhost:8545

* save

* liner fix

Co-authored-by: alex.sharov <[email protected]>

* sentry: refactor flags, add maxpeers. (#3961)

* Experiment files 1 by 1 (#3959)

* Experiment files 1 by 1

* Remove check

* sort preverified snapshots

* docs: docker permissions

* sort preverified snapshots

* sort preverified snapshots

* sort preverified snapshots

* sort preverified snapshots

* sort preverified snapshots

* sort preverified snapshots

* save

* Fix speed log, remove file name

* Move timer out of the loop

* Calculate total size of downloaded files

* Fixes

* Fix

* Fix

* Fix

* Move downloadData

* Fix

* Revert "Fix"

This reverts commit 038e02b.

* Revert "Move downloadData"

This reverts commit 8130a4d.

* Revert "Fix"

This reverts commit 1dca25b.

* Revert "Fix"

This reverts commit ee5a1e8.

* Revert "Fix"

This reverts commit 8af7be7.

* Revert "Fixes"

This reverts commit 50509af.

* Revert "Calculate total size of downloaded files"

This reverts commit 64a26df.

* Remove progress

* Remove progress

Co-authored-by: Alexey Sharp <[email protected]>
Co-authored-by: alex.sharov <[email protected]>

* Update stage_headers.go (#3966)

* Snapshots: open bittorrent udp port in docker (#3969)

* Snapshots: open torrent udp in docker-compose.yml

* Snapshots: open torrent udp in docker-compose.yml

* Delete blocks in [from, to) range (#3970)

* Snapshots: allow stage_headers --unwind behind available snapshots (#3971)

* save

* save

* save

* Integration: allow headers --reset (#3972)

* Bsc: enable syncmode=snap by default #3973

* rlp: add support for optional struct fields (#22832) (#3977)

This adds support for a new struct tag "optional". Using this tag, structs used
for RLP encoding/decoding can be extended in a backwards-compatible way,
by adding new fields at the end.

see geth commit ethereum/go-ethereum@700df14

Co-authored-by: Felix Lange <[email protected]>

* Forgot to check err status (#3978)

* Forgot to check err status

* Invalid header shouldn't fail the entire stage

* Potential fix for verification (#3962)

* Potential fix for verification

* multi verify

Co-authored-by: Alexey Sharp <[email protected]>
Co-authored-by: Alex Sharp <[email protected]>

* p2p/discover/v4wire: use optional RLP field for EIP-868 seq (#3963)

This changes the definitions of Ping and Pong, adding an optional field
for the sequence number. This field was previously encoded/decoded using
the "tail" struct tag, but using "optional" is much nicer.

see ethereum/go-ethereum#22842

Co-authored-by: Felix Lange <[email protected]>

* FullSync instead of FastSync (#3980)

* Update README.md (#3984)

* Update README.md (#3985)

* Update README.md (#3987)

* Update README.md (#3988)

* Update README.md (#3989)

* save (#3983)

* Update to erigon-lib main (#3992)

Co-authored-by: Alex Sharp <[email protected]>

* TxLookup fix 2 (#3994)

* save

* save

* tolerate some fails

* tolerate some fails

Co-authored-by: Alexey Sharp <[email protected]>

* No NewBlock gossip after Merge (#3995)

* Check that safe & finalized blocks are canonical for no-op forkChoice (#3997)

* Place finishHandlingForkChoice after startHandlingForkChoice

* forkChoiceMessage -> forkChoice

* Check that safe & finalized blocks are canonical for no-op forkChoice

* Re-introduced cleanup of temporary table (#3999)

* Re-introduced cleanup of temporary table

* Fix sign

* Fix lint

* Fix lint

* Revert

Co-authored-by: Alex Sharp <[email protected]>

* Update skip_analysis.go (#4003)

* Downloader: calc stat inside, add --torrent.download.slots and limit downloads inside (#3986)

* save

* save

* save

* save

* save

* save

* save

* save

* save

* p2p: speed-up TestUDPv4_LookupIterator (#4000)

The test was slow, because it was trying to find
predefined nodeIDs (lookupTestnet) by generating random keys
and trying to find their neighbours
until it hits all nodes of the lookupTestnet.
In addition each FindNode response was waited for 0.5 sec (respTimeout).
This could take up to 30 sec and fail the test suite.

A fake random key generator is now used during the test.
It issues the expected keys, and the lookup converges quickly.
The reply timeout is reduced for the test.
Now it normally takes less than.1 sec.

* p2p: refactor MaxPendingPeers handling (#3981)

* use semaphore instead of a chan struct{}
* move MaxPendingPeers default value to DefaultConfig.P2P
* log Error if Accept fails
* replace quit channel with context

* downloader stuck on 99.9% fix #4004

* Open only existing torrent files (#4007)

* save

* save

* save

* save

* save

* Open shorter logs #400

* Fix empty "Tables" log line (#4008)

* save

* save

* save

* Torrent: maxpeers flag were used incorrectly

* reduce downloader deps (#4010)

* reduce downloader deps

* reduce downloader deps

* reduce downloader deps (#4011)

* Handle system-txn in block_reader (#4012)

* reduce downloader deps

* reduce downloader deps

* save

* reduce downloader deps

* [integration tool] Clean BorReceipt when reset state (#4013)

* Update reset_state.go

* Update reset_state.go

* rename field "type" (#4015)

* save

* save

* save

* typed sender (#4016)

* save

* save

* Observer: fix panic on clean start (#4002) (#4017)

Problem: (nil, nil) from CountPingErrors was not handled.
This happens if the node is not in the db (a bootstrap node),
and was never crawled before.

* Add override.terminaltotaldifficulty flag (#4018)

* cmd/utils: initialize f.Value before setting variable

* override.terminaltotaldifficulty flag

* Add OverrideTerminalTotalDifficulty to default_flags

* p2p: fix flaky TestUDPv5_lookupE2E (#4020)

The test was flaky, because of the "endpoint prediction".
The test starts 5 nodes one by one.
Node 0 is used as a bootstrap node for nodes 1-4.
When it is about to add, say, node 3, nodes 0 and 1 might already have had a chance to communicate,
and updateEndpoints() deletes the node 0 UDP port, because fallbackUDP port was not configured.

In this case node 3 would get a bootstrap node 0 without a port and lead to an error:

    v5_udp_test.go:110: bad bootstrap node "enr:...": missing UDP port

The problem was reproducible by this command:

    go test ./p2p/discover -run TestUDPv5_lookupE2E -count 500

* Added Goerli Full Node Space Requirements (#4021)

* p2p: crawler-friendly handshake (#3982)

* exchange RLPx Hello even when maxpeers limit is reached
* bump MaxPendingPeers to increase the default handshake queue
  (and the likelyhood of Hello exchange)

* Add link about rqspbery po (#4022)

* More efficient header verification of headers for Parlia when snapshots are used (#3998)

* Update stageloop.go

* Print

* Consider snapshot headers as parlia checkpoints

* Not fail after not loading snapshot

* Lazy snapshots

* Print number of validators

* More printing

* Use epoch instead of checkpoint interval

* Reduce logging

* Fix compilation

* Remove trace jump dest

* Fix lint

* Not store snapshots every epoch

* Separate snapshot for verification and finalisation

Co-authored-by: Alex Sharp <[email protected]>
Co-authored-by: Alexey Sharp <[email protected]>

* Docker build: make db-tools to depend on git-submodules (#4024)

* save

* save

* save

* save

* save

* More careful handle of sequences in stage_headers --reset (#4023)

* save

* save

* save

* save

* added ovveride merge fork block (#4027)

* Fix non-starting download (#4031)

* save

* save

* save

* save

* save (#4032)

* Truncate bor receipts on unwind (#4033)

Co-authored-by: Alexey Sharp <[email protected]>

* eth/filters: Fix filterLogs() (#4036)

* index segments by maximum by 2 workers #4041

* trace read parent header from snapshot and lru #4042

* make sure stage_headers --reset doesn't left garbage in bodies table #4043

* Fix for Bor (Polygon) (#4044)

* print branchHash

* Print state changes

* Print val

* Fix for author

* Remove prints

Co-authored-by: Alexey Sharp <[email protected]>

* Cleanup isBor (#4045)

Co-authored-by: Alexey Sharp <[email protected]>

* Speed up docker image build by use layer cache (#4038)

* speed up docker image build by use layer cache

* rearrenge Dockerfile

* enable docker layer cache in github action

* state_processor: fix ignored SkipAnalysis() result (#4046)

`cfg` is not a pointer

* p2p: improve test TestTable_findnodeByID (#4047)

* refactor test
* add a fast fixed examples test for the main suite
* split slow test for the integration suite

* Update skip_analysis.go (#4052)

* More relax inclusion of headers in the downloader (#4050)

* More relax inclusion of headers in the downloader

* Fix

Co-authored-by: Alexey Sharp <[email protected]>

* Revert "Speed up docker image build by use layer cache (#4038)" (#4054)

This reverts commit e758fb8.

* Increase max DB size to 8 Tb for chain data only (#4055)

* Update node.go

* Update node.go

* Point to erigon-lib alpha

Co-authored-by: Alexey Sharp <[email protected]>
Co-authored-by: Alex Sharp <[email protected]>
Co-authored-by: battlmonstr <[email protected]>
Co-authored-by: Chase Wright <[email protected]>
Co-authored-by: Alex Sharov <[email protected]>
Co-authored-by: Giulio rebuffo <[email protected]>
Co-authored-by: Krishna Upadhyaya <[email protected]>
Co-authored-by: Håvard Anda Estensen <[email protected]>
Co-authored-by: Enrique Jose  Avila Asapche <[email protected]>
Co-authored-by: Felix Lange <[email protected]>
Co-authored-by: Andrew Ashikhmin <[email protected]>
Co-authored-by: gaia <[email protected]>
Co-authored-by: EXEC <[email protected]>
Co-authored-by: Groute <[email protected]>

Dockerfile

@@ -6,8 +6,7 @@ RUN apk --no-cache add make gcc g++ linux-headers git bash ca-certificates libgc
 WORKDIR /app
 ADD . .
 
-# expect that host run `git submodule update --init`
-RUN make erigon rpcdaemon integration sentry txpool downloader hack db-tools
+RUN make erigon rpcdaemon integration sentry txpool downloader hack observer db-tools
 
 FROM docker.io/library/alpine:3.15
 

Makefile

@@ -19,7 +19,7 @@ GO_FLAGS += -ldflags "-X ${PACKAGE}/params.GitCommit=${GIT_COMMIT} -X ${PACKAGE}
 
 GOBUILD = $(CGO_CFLAGS) $(GO) build $(GO_FLAGS)
 GO_DBG_BUILD = $(DBG_CGO_CFLAGS) $(GO) build $(GO_FLAGS) -tags $(BUILD_TAGS),debug -gcflags=all="-N -l"  # see delve docs
-GOTEST = GODEBUG=cgocheck=0 $(GO) test $(GO_FLAGS) ./... -p 2
+GOTEST = GODEBUG=cgocheck=0 $(GO) test $(GO_FLAGS) ./... -p 2 -tags $(BUILD_TAGS),integration
 
 default: all
 
@@ -29,7 +29,7 @@ go-version:
 		exit 1 ;\
 	fi
 
-docker:
+docker: git-submodules
 	DOCKER_BUILDKIT=1 docker build -t erigon:latest --build-arg git_commit='${GIT_COMMIT}' --build-arg git_branch='${GIT_BRANCH}' --build-arg git_tag='${GIT_TAG}' .
 
 xdg_data_home :=  ~/.local/share
@@ -74,7 +74,7 @@ $(COMMANDS): %: %.cmd
 
 all: erigon $(COMMANDS)
 
-db-tools:
+db-tools: git-submodules
 	@echo "Building db-tools"
 
 	# hub.docker.com setup incorrect gitpath for git modules. Just remove it and re-init submodule.
@@ -137,6 +137,7 @@ escape:
 	cd $(path) && go test -gcflags "-m -m" -run none -bench=BenchmarkJumpdest* -benchmem -memprofile mem.out
 
 git-submodules:
+	@[ -d ".git" ] || (echo "Not a git repository" && exit 1)
 	@echo "Updating git submodules"
 	@# Dockerhub using ./hooks/post-checkout to set submodules, so this line will fail on Dockerhub
 	@git submodule update --quiet --init --recursive --force || true

README.md

@@ -43,7 +43,7 @@ System Requirements
 ===================
 
 For an Archive node of Mainnet we recommend >=3TB storage space: 1.8TB state (as of March 2022),
-200GB temp files (can symlink or mount folder `<datadir>/etl-tmp` to another disk). Mainnet Full node (see `--prune*` flags): 400Gb (April 2022), BSC Archive: 7Tb. BSC Full: 1Tb
+200GB temp files (can symlink or mount folder `<datadir>/etl-tmp` to another disk). Mainnet Full node (see `--prune*` flags): 400Gb (April 2022), BSC Archive: 7Tb. BSC Full: 1Tb. Goerli Full node (see `--prune*` flags): 189GB on Beta, 114GB on Alpha (April 2022).
 SSD or NVMe. Do not recommend HDD - on HDD Erigon will always stay N blocks behind chain tip, but not fall behind. 
 Bear in mind that SSD performance deteriorates when close to capacity.
 
@@ -368,6 +368,10 @@ Docker uses user erigon with UID/GID 1000 (for security reasons). You can see th
 Can fix by giving a host's user ownership of the folder, where the host's user UID/GID is the same as the docker's user UID/GID (1000).
 More details in [post](https://www.fullstaq.com/knowledge-hub/blogs/docker-and-the-host-filesystem-owner-matching-problem)
 
+### Run RaspberyPI
+
+https://github.com/mathMakesArt/Erigon-on-RPi-4
+
 Getting in touch
 ================