Supported Python versions: Python 2.7.9+, 3.3, 3.4, 3.5, 3.6 (nightly) and PyPy 2.5.0.
If you are on Gentoo Linux, run
emerge dev-python/pymax --ask
otherwise use pip
pip install pymax
To find any cube in your network:
from pymax.cube import Discovery
response = Discovery().discover()
print(response)
To find a specific cube in your network:
from pymax.cube import Discovery
response = Discovery().discover(cube_serial=u'LEQ1154727', discovery_type=Discovery.DISCOVERY_TYPE_NETWORK_CONFIG)
print(response)
>>> LEQ1154727: IP: 10.10.10.153, Netmask: 255.255.255.0, Gateway: 10.10.10.1, DNS1: 10.10.10.1, DNS2: 0.0.0.0
from pymax.cube import Cube, Connection
cube = Cube('192.168.1.123')
# or
cube = Cube('192.168.1.123', 62910)
# or
cube = Cube(address='192.168.1.123', port=62910)
# or
cube = Cube(Connection(('192.168.1.123', 62910))
try:
cube.connect()
# fun code here
finally:
cube.disconnect()
The Cube object implements a context manager, so it's easier to write:
from pymax.cube import Cube
with Cube('192.168.1.123') as cube:
# fun code here
or, together with a discovery query:
response = Discovery().discover(cube_serial=u'LEQ1154727', discovery_type=Discovery.DISCOVERY_TYPE_NETWORK_CONFIG)
with Cube(response.ip_address) as cube:
print(cube)
with Cube(response.ip_address) as cube:
for room in cube.rooms:
print("%s:" % room.name)
for device in room.devices:
print(" %s (%s), serial: %s" % (device.name, device.type, device.serial))
Resources:
- https://github.com/Bouni/max-cube-protocol
- http://www.domoticaforum.eu/viewtopic.php?f=66&t=6654
See LICENSE.txt