https://zenodo.org/record/4718622
The default GEOS-Chem v12.1.0 source code (https://doi.org/10.5281/zenodo.1553349) was updated to include the following:
- Parameterization for N2O5 heterogneous uptake - following McDuffie et al., 2018a (impelmented in default GCv12.6.0 https://doi.org/10.5281/zenodo.3507501)
- Heterogeneous production of ClNO2 from sea salt aerosol - following implmentation in Shah et al., 2018 and ClNO2 yield recommendations from McDuffie et al., 2018b
- Reduced dry deposition rates for HNO3 at cold temperatures - following Shah et al., 2018 (implemented in default GCv12.6.0 https://doi.org/10.5281/zenodo.3507501)
- Updated wet deposition scheme - following Luo et al., 2019 (updated version included as an option starting in GCv12.7.0 https://doi.org/10.5281/zenodo.3634864)
Additional minor updates (bug fixes) from later versions of the default GEOS-Chem source code included here:
- Updated HEMCO_config.rc file to read in the uodated MEGAN/2018-05 PFT (plant functional type) file (update in 12.3.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.3.0)
- Updated MEGAN extension to correctly calcuatle monoterpene concentraions (bug fix in v12.3.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.3.0)
- Changed erruptive volcanic emisssions to 'R' in HEMCO_Config.rc file, maintained 'C' cycling for degassing emissions (bug fix in 12.3.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.3.0)
- Turned on photoloysis for DHDC and turned off photolysis for DHDN (update in 12.3.2: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.3.2)
- Removed CO from MEGAN HEMCO extension to avoid double counting (updated in 12.5.0)
- Updated volanic emissions to AeroCom (extended to 2018) (updated in 12.3.0, 12.4.0, and 12.5.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.5.0)
- Fixed heterogeneous cloud parameters in the HetRates file (update in 12.5.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.5.0)
- Changed stratospheric Bry $MM in HEMCO_Config to 1-12 to make sure emissions are read correctly each moth (v12.5.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.5.0)
- Removed 27% scaling factor for POG from GFEd emissions (updated in 12.5.0, from Pai et al., 2019)
- Updated GFED emissions to the 4s beta version (updated in v12.8.0: http://wiki.seas.harvard.edu/geos-chem/index.php/GEOS-Chem_12#12.8.0)
Luo G, Yu F, & Schwab J (2019) Revised treatment of wet scavenging processes dramatically improves GEOS-Chem 12.0.0 simulations of nitric acid, nitrate, and ammonium over the United States. Geosci. Model Dev. Discuss. 2019:1-18.
McDuffie EE, et al. (2018a) Heterogeneous N2O5 Uptake During Winter: Aircraft Measurements During the 2015 WINTER Campaign and Critical Evaluation of Current Parameterizations. J. Geophys. Res. Atmos. 123(8):4345-4372.
McDuffie EE, et al. (2018b) ClNO2 Yields From Aircraft Measurements During the 2015 WINTER Campaign and Critical Evaluation of the Current Parameterization. J. Geophys. Res. Atmos. 123(22):12,994-913,015.
Pai SJ, et al. (2019) An evaluation of global organic aerosol schemes using airborne observations. Atmos. Chem. Phys. Discuss. 2019:1-39.
Shah V, et al. (2018) Chemical feedbacks weaken the wintertime response of particulate sulfate and nitrate to emissions reductions over the eastern United States. P. Natl. Acad. Sci. 115:8110-8115.
The following is the README from the official GEOS-Chem Source code repository
The Official GEOS-Chem repository (https://github.com/gcst/geos-chem) contains the source code for the GEOS-Chem model of atmospheric chemistry and composition.
As of June 2018, we have migrated the GEOS-Chem source code repository to back Github. Going forward, please make sure to clone or pull code updates ONLY from this repository.
This repository contains several branches. Each branch contains code updates belonging to a particular line of development.
-
The master branch always contains the current stable version. You should never add new code directly into this branch. Instead, open a new branch off of master and add your code there.
-
The dev/X.Y.Z branches always contains in-development code for upcoming version X.Y.Z. Code in dev/X.Y.Z is very much "work in progress" and should not be relied upon until it has been fully debugged, validated, and merged back into the master branch.
-
The GEOS branch contains updates that are specific to the interface between GEOS-Chem and the NASA GEOS-DAS Earth System Model. Most GEOS-Chem users can simply ignore this branch.
-
From time to time, you will see other branches pertaining to new lines of development being created. These branches usually will start with feature/ or bugfix/. Once the code in these branches has been sufficiently validated, these branches will be merged back into the master branch. You should not use code in these branches.
GEOS-Chem versions are now denoted by 3 digits (X.Y.Z):
-
The X digit is the major version number. A change in X denotes that the current version contains a significant update that breaks backwards-compatibility with the prior series of GEOS-Chem versions. Major structural updates typically will require an update to X. In the past we have changed the X digit when replacing SMVGEAR with FlexChem (version 10 to version 11) and replacing legacy emissions with HEMCO (version 9 to version 10).
-
The Y digit is the feature version number. A change in Y denotes that a 1-month benchmark has been performed to validate a new feature or set of features. Some (but not all) Y versions will have 1-year benchmarks performed as well. In general, the Y digit changes whenever a new feature breaks backwards compatibility with one or more run directories from the prior version.
-
The Z digit is the bug fix (or patch) version number. A change in Z denotes that a bug fix was made that does not break backwards compatibility with run directories from the prior verison. Z will also be updated when bug fixes or minor updates are made to one or more of the GEOS-Chem "Specialty" simulations. Updating specialty simulations should not affect the output of the GEOS-Chem 1-month or 1-year benchmark simulations.
For more information, please see this wiki page: http://wiki.geos-chem.org/GEOS-Chem_version_numbering_system
All benchmarked GEOS-Chem versions are tagged in the Git history. Use git tag in your terminal to see a list of available tags. Tags will also be highlighted in the gitk browser window.
You can now cite GEOS-Chem in publications with a Digital Object Identifier (DOI). Each GEOS-Chem release will be assigned its own individual DOI. DOI's for each GEOS-Chem version will be posted on the GEOS-Chem website and GEOS-Chem wiki.
We have also generated a concept DOI, which will always point to the current stable version of GEOS-Chem (i.e. corresponding to the master branch):
The GEOS-Chem web site is a good place to get started. It will point you to many important GEOS-Chem resources.
You can find the The GEOS-Chem User's Guide online here:
The most up-to-date information about GEOS-Chem is posted on the GEOS-Chem wiki. Here you will find information about technical issues, bug fixes, and other pertinent topics.
To generate GEOS-Chem run directories, please clone the geos-chem-unittest repository and follow the instructions as listed on this GEOS-Chem wiki page: http://wiki.seas.harvard.edu/geos-chem/index.php/Creating_GEOS-Chem_run_directories
We encourage GEOS-Chem users to use the Github issue tracker attached to this repository to report bugs or technical issues with the GEOS-Chem code.
You are also invited to direct GEOS-Chem support requests to the GEOS-Chem Support Team at [email protected].
14 Nov 2018 GEOS-Chem Support Team [email protected]