Add certificate TLS verification mode (#20293)

CHANGELOG.next.asciidoc

@@ -19,6 +19,7 @@ https://github.com/elastic/beats/compare/v7.0.0-alpha2...master[Check the HEAD d
 - Make error message about locked data path actionable. {pull}18667[18667]
 - Ensure dynamic template names are unique for the same field. {pull}18849[18849]
 - Remove the deprecated `xpack.monitoring.*` settings. Going forward only `monitoring.*` settings may be used. {issue}9424[9424] {pull}18608[18608]
+- Added `certificate` TLS verification mode to ignore server name mismatch. {issue}12283[12283] {pull}20293[20293]
 
 *Auditbeat*
 

NOTICE.txt

@@ -11663,11 +11663,11 @@ Contents of probable licence file $GOMODCACHE/github.com/oklog/[email protected]/LICEN
 
 --------------------------------------------------------------------------------
 Dependency : github.com/pierrre/gotestcover
-Version: v0.0.0-20160113212533-7b94f124d338
+Version: v0.0.0-20160517101806-924dca7d15f0
 Licence type (autodetected): MIT
 --------------------------------------------------------------------------------
 
-Contents of probable licence file $GOMODCACHE/github.com/pierrre/[email protected]20160113212533-7b94f124d338/LICENSE:
+Contents of probable licence file $GOMODCACHE/github.com/pierrre/[email protected]20160517101806-924dca7d15f0/LICENSE:
 
 Copyright (C) 2015 Pierre Durand
 

auditbeat/auditbeat.reference.yml

@@ -489,10 +489,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -608,10 +616,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -793,10 +809,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -941,10 +965,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -1222,10 +1254,18 @@ setup.kibana:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -1411,10 +1451,18 @@ logging.files:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1

filebeat/filebeat.reference.yml

@@ -1215,10 +1215,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -1334,10 +1342,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -1519,10 +1535,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -1667,10 +1691,18 @@ output.elasticsearch:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -1948,10 +1980,18 @@ setup.kibana:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1
@@ -2137,10 +2177,18 @@ logging.files:
   # Use SSL settings for HTTPS.
   #ssl.enabled: true
 
-  # Configure SSL verification mode. If `none` is configured, all server hosts
-  # and certificates will be accepted. In this mode, SSL-based connections are
-  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-  # `full`.
+  # Controls the verification of certificates. Valid values are:
+  # * full, which verifies that the provided certificate is signed by a trusted
+  # authority (CA) and also verifies that the server's hostname (or IP address)
+  # matches the names identified within the certificate.
+  # * certificate, which verifies that the provided certificate is signed by a
+  # trusted authority (CA), but does not perform any hostname verification.
+  #  * none, which performs no verification of the server's certificate. This
+  # mode disables many of the security benefits of SSL/TLS and should only be used
+  # after very careful consideration. It is primarily intended as a temporary
+  # diagnostic mechanism when attempting to resolve TLS errors; its use in
+  # production environments is strongly discouraged.
+  # The default value is full.
   #ssl.verification_mode: full
 
   # List of supported/valid TLS versions. By default all TLS versions from 1.1

go.mod

@@ -123,7 +123,7 @@ require (
 	github.com/oklog/ulid v1.3.1
 	github.com/opencontainers/go-digest v1.0.0-rc1.0.20190228220655-ac19fd6e7483 // indirect
 	github.com/opencontainers/image-spec v1.0.2-0.20190823105129-775207bd45b6 // indirect
-	github.com/pierrre/gotestcover v0.0.0-20160113212533-7b94f124d338
+	github.com/pierrre/gotestcover v0.0.0-20160517101806-924dca7d15f0
 	github.com/pkg/errors v0.9.1
 	github.com/pmezard/go-difflib v1.0.0
 	github.com/poy/eachers v0.0.0-20181020210610-23942921fe77 // indirect

go.sum

@@ -568,8 +568,8 @@ github.com/oxtoacart/bpool v0.0.0-20150712133111-4e1c5567d7c2/go.mod h1:L3UMQOTh
 github.com/peterbourgon/diskv v2.0.1+incompatible/go.mod h1:uqqh8zWWbv1HBMNONnaR/tNboyR3/BZd58JJSHlUSCU=
 github.com/pierrec/lz4 v2.4.1+incompatible h1:mFe7ttWaflA46Mhqh+jUfjp2qTbPYxLB2/OyBppH9dg=
 github.com/pierrec/lz4 v2.4.1+incompatible/go.mod h1:pdkljMzZIN41W+lC3N2tnIh5sFi+IEE17M5jbnwPHcY=
-github.com/pierrre/gotestcover v0.0.0-20160113212533-7b94f124d338 h1:/VAZ3an4jHXs+61iNHugNR1mG25MSpaxtMnwOJVEAQM=
-github.com/pierrre/gotestcover v0.0.0-20160113212533-7b94f124d338/go.mod h1:4xpMLz7RBWyB+ElzHu8Llua96TRCB3YwX+l5EP1wmHk=
+github.com/pierrre/gotestcover v0.0.0-20160517101806-924dca7d15f0 h1:i5VIxp6QB8oWZ8IkK8zrDgeT6ORGIUeiN+61iETwJbI=
+github.com/pierrre/gotestcover v0.0.0-20160517101806-924dca7d15f0/go.mod h1:4xpMLz7RBWyB+ElzHu8Llua96TRCB3YwX+l5EP1wmHk=
 github.com/pkg/errors v0.8.0/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
 github.com/pkg/errors v0.8.1-0.20170505043639-c605e284fe17/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
 github.com/pkg/errors v0.8.1-0.20171018195549-f15c970de5b7/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=