X5SA-2E Multiple fixes

effgarces · Aug 9, 2020 · cfc143e · cfc143e
1 parent c88bf98
commit cfc143e
Show file tree

Hide file tree

Showing 2 changed files with 19 additions and 19 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -130,11 +130,11 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_CHITU3D_V5
+  #define MOTHERBOARD BOARD_CHITU3D_V6
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "Tronxy X5SA"
+#define CUSTOM_MACHINE_NAME "Tronxy X5SA-2E"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -144,13 +144,13 @@
 
 // This defines the number of extruders
 // :[0, 1, 2, 3, 4, 5, 6, 7, 8]
-#define EXTRUDERS 1
+#define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
-//#define SINGLENOZZLE
+#define SINGLENOZZLE
 
 // Save and restore temperature and fan speed on tool-change.
 // Set standby for the unselected tool with M104/106/109 T...
@@ -686,16 +686,16 @@
  *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE  A4988
+#define X_DRIVER_TYPE  TMC2208_STANDALONE
+#define Y_DRIVER_TYPE  TMC2208_STANDALONE
+#define Z_DRIVER_TYPE  TMC2208_STANDALONE
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
 //#define Z2_DRIVER_TYPE A4988
 //#define Z3_DRIVER_TYPE A4988
 //#define Z4_DRIVER_TYPE A4988
-#define E0_DRIVER_TYPE A4988
-//#define E1_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE TMC2208_STANDALONE
+#define E1_DRIVER_TYPE TMC2208_STANDALONE
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
 //#define E4_DRIVER_TYPE A4988
@@ -749,7 +749,7 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.6 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 764 }
 //TITAN EXTRUDER:
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.6 }
 
@@ -798,7 +798,7 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-//#define CLASSIC_JERK
+#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
   #define DEFAULT_XJERK 10.0
   #define DEFAULT_YJERK 10.0
@@ -835,7 +835,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-#define S_CURVE_ACCELERATION
+//#define S_CURVE_ACCELERATION
 
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1104,8 +1104,8 @@
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
-#define INVERT_E0_DIR false
-#define INVERT_E1_DIR false
+#define INVERT_E0_DIR true
+#define INVERT_E1_DIR true
 #define INVERT_E2_DIR false
 #define INVERT_E3_DIR false
 #define INVERT_E4_DIR false
@@ -1154,7 +1154,7 @@
  */
 
 // Min software endstops constrain movement within minimum coordinate bounds
-#define MIN_SOFTWARE_ENDSTOPS
+//#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
@@ -1182,7 +1182,7 @@
  */
 #define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+  #define NUM_RUNOUT_SENSORS   2     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_STATE     HIGH  // Pin state indicating that filament is NOT present.
   //#define FIL_RUNOUT_PULLUP        // Use internal pullup for filament runout pins.
   //#define FIL_RUNOUT_PULLDOWN      // Use internal pulldown for filament runout pins.
@@ -1644,7 +1644,7 @@
  *
  * View the current statistics with M78.
  */
-//#define PRINTCOUNTER
+#define PRINTCOUNTER
 
 //=============================================================================
 //============================= LCD and SD support ============================

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -1602,10 +1602,10 @@
  *
  * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
  */
-//#define LIN_ADVANCE
+#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
-  #define LIN_ADVANCE_K 0.22    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0    // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // If enabled, this will generate debug information output over USB.
   //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
 #endif