Merge remote-tracking branch 'upstream/bugfix-2.0.x' into X5SA-2E-Bug…

…fix-ColorUI

Marlin/Configuration.h

@@ -610,14 +610,15 @@
 
 // @section machine
 
-// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
+// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
 #define COREXY
 //#define COREXZ
 //#define COREYZ
 //#define COREYX
 //#define COREZX
 //#define COREZY
+//#define MARKFORGED_XY  // MarkForged. See https://reprap.org/forum/read.php?152,504042
 
 //===========================================================================
 //============================== Endstop Settings ===========================

Marlin/src/core/boards.h

@@ -235,6 +235,7 @@
 #define BOARD_SMOOTHIEBOARD           2506  // Smoothieboard
 #define BOARD_TH3D_EZBOARD            2507  // TH3D EZBoard v1.0
 #define BOARD_BTT_SKR_V1_4_TURBO      2508  // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed)
+#define BOARD_MKS_SGEN_L_V2           2509  // MKS SGEN_L V2 (Power outputs: Hotend0, Hotend1, Bed, Fan)
 
 //
 // SAM3X8E ARM Cortex M3

Marlin/src/core/utility.cpp

@@ -57,10 +57,11 @@ void safe_delay(millis_t ms) {
 
   void log_machine_info() {
     SERIAL_ECHOLNPGM("Machine Type: "
-      TERN_(DELTA, "Delta")
-      TERN_(IS_SCARA, "SCARA")
-      TERN_(IS_CORE, "Core")
-      TERN_(IS_CARTESIAN, "Cartesian")
+      TERN_(DELTA,         "Delta")
+      TERN_(IS_SCARA,      "SCARA")
+      TERN_(IS_CORE,       "Core")
+      TERN_(MARKFORGED_XY, "MarkForged")
+      TERN_(IS_CARTESIAN,  "Cartesian")
     );
 
     SERIAL_ECHOLNPGM("Probe: "

Marlin/src/feature/bedlevel/ubl/ubl.cpp

@@ -48,7 +48,7 @@
 
   void unified_bed_leveling::report_current_mesh() {
     if (!leveling_is_valid()) return;
-    SERIAL_ECHO_MSG("  G29 I99");
+    SERIAL_ECHO_MSG("  G29 I999");
     GRID_LOOP(x, y)
       if (!isnan(z_values[x][y])) {
         SERIAL_ECHO_START();

Marlin/src/feature/leds/neopixel.h

@@ -110,7 +110,7 @@ class Marlin_NeoPixel {
       #if CONJOINED_NEOPIXEL
         adaneo2.show();
       #else
-        TERN_(NEOPIXEL2_SEPARATE,,adaneo1.setPin(NEOPIXEL2_PIN));
+        TERN(NEOPIXEL2_SEPARATE,,adaneo1.setPin(NEOPIXEL2_PIN));
         adaneo1.show();
         adaneo1.setPin(NEOPIXEL_PIN);
       #endif

Marlin/src/gcode/host/M360.cpp

@@ -145,10 +145,11 @@ void GcodeSuite::M360() {
 
   config_prefix(PSTR("PrinterType"));
   SERIAL_ECHOLNPGM(
-    TERN_(DELTA,        "Delta")
-    TERN_(IS_SCARA,     "SCARA")
-    TERN_(IS_CORE,      "Core")
-    TERN_(IS_CARTESIAN, "Cartesian")
+    TERN_(DELTA,         "Delta")
+    TERN_(IS_SCARA,      "SCARA")
+    TERN_(IS_CORE,       "Core")
+    TERN_(MARKFORGED_XY, "MarkForged")
+    TERN_(IS_CARTESIAN,  "Cartesian")
   );
 
   //

Marlin/src/inc/Conditionals_post.h

@@ -149,11 +149,16 @@
     #define CORE_AXIS_2 C_AXIS
   #endif
   #define CORESIGN(n) (ANY(COREYX, COREZX, COREZY) ? (-(n)) : (n))
+#elif ENABLED(MARKFORGED_XY)
+  // Markforged kinematics
+  #define CORE_AXIS_1 A_AXIS
+  #define CORE_AXIS_2 B_AXIS
+  #define NORMAL_AXIS Z_AXIS
 #endif
 
 // Calibration codes only for non-core axes
 #if EITHER(BACKLASH_GCODE, CALIBRATION_GCODE)
-  #if IS_CORE
+  #if EITHER(IS_CORE, MARKFORGED_XY)
     #define X_AXIS_INDEX 0
     #define Y_AXIS_INDEX 1
     #define Z_AXIS_INDEX 2

Marlin/src/inc/SanityCheck.h

@@ -764,6 +764,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #if ENABLED(BABYSTEPPING)
   #if ENABLED(SCARA)
     #error "BABYSTEPPING is not implemented for SCARA yet."
+  #elif BOTH(MARKFORGED_XY, BABYSTEP_XY)
+    #error "BABYSTEPPING only implemented for Z axis on MarkForged."
   #elif BOTH(DELTA, BABYSTEP_XY)
     #error "BABYSTEPPING only implemented for Z axis on deltabots."
   #elif BOTH(BABYSTEP_ZPROBE_OFFSET, MESH_BED_LEVELING)
@@ -1155,8 +1157,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   + ENABLED(COREYZ) \
   + ENABLED(COREYX) \
   + ENABLED(COREZX) \
-  + ENABLED(COREZY)
-  #error "Please enable only one of DELTA, MORGAN_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
+  + ENABLED(COREZY) \
+  + ENABLED(MARKFORGED_XY)
+  #error "Please enable only one of DELTA, MORGAN_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, COREZY, or MARKFORGED_XY."
 #endif
 
 /**
@@ -1576,8 +1579,8 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 #if ENABLED(DUAL_X_CARRIAGE)
   #if EXTRUDERS < 2
     #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
-  #elif CORE_IS_XY || CORE_IS_XZ
-    #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
+  #elif ANY(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY)
+    #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, COREZX, or MARKFORGED_XY."
   #elif !GOOD_AXIS_PINS(X2)
     #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
   #elif !HAS_X_MAX
@@ -2533,6 +2536,8 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #error "CoreXZ requires both X and Z to use sensorless homing if either one does."
 #elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS && !HOMING_Z_WITH_PROBE
   #error "CoreYZ requires both Y and Z to use sensorless homing if either one does."
+#elif ENABLED(MARKFORGED_XY) && X_SENSORLESS != Y_SENSORLESS
+  #error "MARKFORGED_XY requires both X and Y to use sensorless homing if either one does."
 #endif
 
 // Other TMC feature requirements
@@ -2848,6 +2853,10 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
     #error "BACKLASH_COMPENSATION requires BACKLASH_DISTANCE_MM."
   #elif !defined(BACKLASH_CORRECTION)
     #error "BACKLASH_COMPENSATION requires BACKLASH_CORRECTION."
+  #elif ENABLED(MARKFORGED_XY)
+    constexpr float backlash_arr[] = BACKLASH_DISTANCE_MM;
+    static_assert(!backlash_arr[CORE_AXIS_1] && !backlash_arr[CORE_AXIS_2],
+                  "BACKLASH_COMPENSATION can only apply to " STRINGIFY(NORMAL_AXIS) " on a MarkForged system.");
   #elif IS_CORE
     constexpr float backlash_arr[] = BACKLASH_DISTANCE_MM;
     static_assert(!backlash_arr[CORE_AXIS_1] && !backlash_arr[CORE_AXIS_2],
@@ -3093,7 +3102,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
  * Sanity check for WIFI
  */
 #if EITHER(ESP3D_WIFISUPPORT, WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
-  #error "ESP3D_WIFISUPPORT or WIFISUPPORT requires an ESP32 controller."
+  #error "ESP3D_WIFISUPPORT or WIFISUPPORT requires an ESP32 MOTHERBOARD."
 #endif
 
 /**

Marlin/src/inc/Version.h

@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-09-01"
+  #define STRING_DISTRIBUTION_DATE "2020-09-04"
 #endif
 
 /**

Marlin/src/lcd/dwin/dwin.cpp

@@ -28,6 +28,10 @@
 
 #if ENABLED(DWIN_CREALITY_LCD)
 
+#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT) && DISABLED(PROBE_MANUALLY)
+  #define HAS_ONESTEP_LEVELING 1
+#endif
+
 #include "dwin.h"
 
 #include <WString.h>
@@ -57,7 +61,7 @@
   #include "../../feature/host_actions.h"
 #endif
 
-#if HAS_LEVELING
+#if HAS_ONESTEP_LEVELING
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
 
@@ -596,7 +600,7 @@ inline void Draw_Prepare_Menu() {
 inline void Draw_Control_Menu() {
   Clear_Main_Window();
 
-  const int16_t scroll = TERN(HAS_LEVELING, MROWS - index_control, 0); // Scrolled-up lines
+  const int16_t scroll = TERN(HAS_ONESTEP_LEVELING, MROWS - index_control, 0); // Scrolled-up lines
 
   #define CSCROL(L) (scroll + (L))
   #define CLINE(L)  MBASE(CSCROL(L))
@@ -976,7 +980,7 @@ void Goto_MainMenu(void) {
   ICON_Print();
   ICON_Prepare();
   ICON_Control();
-  TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(select_page.now == 3);
+  TERN(HAS_ONESTEP_LEVELING, ICON_Leveling, ICON_StartInfo)(select_page.now == 3);
 }
 
 inline ENCODER_DiffState get_encoder_state() {
@@ -1782,7 +1786,7 @@ void HMI_MainMenu(void) {
         case 0: ICON_Print(); break;
         case 1: ICON_Print(); ICON_Prepare(); break;
         case 2: ICON_Prepare(); ICON_Control(); break;
-        case 3: ICON_Control(); TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(1); break;
+        case 3: ICON_Control(); TERN(HAS_ONESTEP_LEVELING, ICON_Leveling, ICON_StartInfo)(1); break;
       }
     }
   }
@@ -1791,8 +1795,8 @@ void HMI_MainMenu(void) {
       switch (select_page.now) {
         case 0: ICON_Print(); ICON_Prepare(); break;
         case 1: ICON_Prepare(); ICON_Control(); break;
-        case 2: ICON_Control(); TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(0); break;
-        case 3: TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(1); break;
+        case 2: ICON_Control(); TERN(HAS_ONESTEP_LEVELING, ICON_Leveling, ICON_StartInfo)(0); break;
+        case 3: TERN(HAS_ONESTEP_LEVELING, ICON_Leveling, ICON_StartInfo)(1); break;
       }
     }
   }
@@ -1822,7 +1826,7 @@ void HMI_MainMenu(void) {
 
       /* Leveling */
       case 3:
-        #if HAS_LEVELING
+        #if HAS_ONESTEP_LEVELING
           checkkey = Leveling;
           HMI_Leveling();
         #else
@@ -2324,7 +2328,7 @@ void HMI_Control(void) {
 
   // Avoid flicker by updating only the previous menu
   if (encoder_diffState == ENCODER_DIFF_CW) {
-    #define CONTROL_ITEMS (5 + ENABLED(HAS_LEVELING))
+    #define CONTROL_ITEMS (5 + ENABLED(HAS_ONESTEP_LEVELING))
     if (select_control.inc(CONTROL_ITEMS)) {
       if (select_control.now > MROWS && select_control.now > index_control) {
         index_control = select_control.now;
@@ -2402,12 +2406,17 @@ void HMI_Control(void) {
   DWIN_UpdateLCD();
 }
 
-/* Leveling */
-void HMI_Leveling(void) {
-  Popup_Window_Leveling();
-  DWIN_UpdateLCD();
-  queue.inject_P(PSTR("G28O\nG29"));
-}
+
+#if HAS_ONESTEP_LEVELING
+
+  /* Leveling */
+  void HMI_Leveling(void) {
+    Popup_Window_Leveling();
+    DWIN_UpdateLCD();
+    queue.inject_P(PSTR("G28O\nG29"));
+  }
+
+#endif
 
 /* Axis Move */
 void HMI_AxisMove(void) {
@@ -2896,7 +2905,7 @@ void HMI_Info(void) {
   ENCODER_DiffState encoder_diffState = get_encoder_state();
   if (encoder_diffState == ENCODER_DIFF_NO) return;
   if (encoder_diffState == ENCODER_DIFF_ENTER) {
-    #if HAS_LEVELING
+    #if HAS_ONESTEP_LEVELING
       checkkey = Control;
       select_control.set(CONTROL_ITEMS);
       Draw_Control_Menu();

Marlin/src/lcd/language/language_cz.h

@@ -404,8 +404,6 @@ namespace Language_cz {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Celkem");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Endstop abort");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Chyba zahřívání");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Chyba zahř.podl.");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Chyba zahř.komory");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("REDUND. TEPLOTA");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("TEPLOTNÍ ÚNIK");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("TEPL. ÚNIK PODL.");

Marlin/src/lcd/language/language_de.h

@@ -446,8 +446,6 @@ namespace Language_de {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Total");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Abbr. mit Endstopp");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("HEIZEN ERFOLGLOS");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Bett heizen fehlge.");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Geh. heizen fehlge.");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("REDUND. TEMP-ABWEI.");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("BETT") " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");

Marlin/src/lcd/language/language_en.h

@@ -447,8 +447,6 @@ namespace Language_en {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Total");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Endstop Abort");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Heating Failed");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Bed Heating Failed");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Chamber Heating Fail");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Err: REDUNDANT TEMP");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("THERMAL RUNAWAY");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("BED THERMAL RUNAWAY");

Marlin/src/lcd/language/language_es.h

@@ -415,8 +415,6 @@ namespace Language_es {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Total");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Cancelado - Endstop");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Calent. fallido");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Calent. cama fallido");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Calent. Cám. fallido");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Err: TEMP. REDUN.");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("FUGA TÉRMICA");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("FUGA TÉRMICA CAMA");

Marlin/src/lcd/language/language_gl.h

@@ -437,8 +437,6 @@ namespace Language_gl {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Total");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Erro FinCarro");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Fallo Quentando");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Fallo Quent. Cama");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Fallo Quent. Cámara");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Erro:Temp Redundante");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("FUGA TÉRMICA");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("FUGA TÉRMICA CAMA");

Marlin/src/lcd/language/language_hu.h

@@ -439,8 +439,6 @@ namespace Language_hu {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Teljes");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Végállás megszakítva!");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Fütés hiba!");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Ágy fütés hiba!");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Kamra fütés hiba!");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Hiba: SZÜKSÉGTELEN HÖFOK");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("FÜTÉS KIMARADÁS");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("ÁGY FÜTÉS KIMARADÁS");

Marlin/src/lcd/language/language_it.h

@@ -445,9 +445,7 @@ namespace Language_it {
   PROGMEM Language_Str MSG_BABYSTEP_Z                      = _UxGT("Babystep Z");
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Totali");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Finecorsa annullati");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Riscald. Fallito");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Risc. piatto fallito");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Risc. camera fallito");
+  PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Risc.Fallito"); // Max 12 caratteri
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Err: TEMP RIDONDANTE");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("TEMP FUORI CONTROLLO");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("TEMP PIAT.FUORI CTRL");

Marlin/src/lcd/language/language_pl.h

@@ -385,8 +385,6 @@ namespace Language_pl {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Łącznie");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Błąd krańcówki");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Rozgrz. nieudane");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Rozgrz. stołu nieudane");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Rozgrz. komory nieudane");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Błąd temperatury");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("ZANIK TEMPERATURY");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("ZANIK TEMP. STOŁU");

Marlin/src/lcd/language/language_pt_br.h

@@ -351,8 +351,6 @@ namespace Language_pt_br {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Total");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Abortar Fim de Curso");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Aquecimento falhou");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Aquecer mesa falhou");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Aquecer câmara falhou");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Erro:Temp Redundante");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("ESCAPE TÉRMICO");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("ESCAPE TÉRMICO MESA");

Marlin/src/lcd/language/language_ro.h

@@ -442,8 +442,6 @@ namespace Language_ro {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Total");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Endstop Abort");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Heating Failed");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Bed Heating Failed");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Chamber Heating Fail");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Err: REDUNDANT TEMP");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("THERMAL RUNAWAY");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("BED THERMAL RUNAWAY");

Marlin/src/lcd/language/language_ru.h

@@ -530,8 +530,6 @@ namespace Language_ru {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Сумарно");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Сработал концевик");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Разогрев не удался");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Сбой нагрева стола");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Сбой нагрева камеры");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Ошибка:Избыточная Т");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("УТЕЧКА ТЕПЛА");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("УТЕЧКА ТЕПЛА СТОЛА");

Marlin/src/lcd/language/language_sk.h

@@ -435,8 +435,6 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Celkom");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Zastavenie Endstop");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Chyba ohrevu");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Chyba ohrevu podl.");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Chyba ohrevu komory");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Chyba: REDUND. TEP.");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("TEPLOTNÝ SKOK");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("TEPLOTNÝ SKOK PODL.");

Marlin/src/lcd/language/language_tr.h

@@ -414,8 +414,6 @@ namespace Language_tr {
   PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("Toplam");
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("Endstop iptal");
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("Isınma başarısız");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("Yatak Isınma Başrsız");
-  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("Oda Isıtma Hatası");
   PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("Hata: Sıcaklık Aşımı");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("TERMAL PROBLEM");
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("TABLA TERMAL PROBLEM");