Merge remote-tracking branch 'upstream/bugfix-2.0.x' into X5SA-2E-Bug…

…fix-ColorUI
effgarces · Dec 1, 2020 · 0f2aae7 · 0f2aae7
2 parents e26103f + 0d080ce
commit 0f2aae7
Show file tree

Hide file tree

Showing 184 changed files with 1,756 additions and 5,630 deletions.
diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml
@@ -54,7 +54,7 @@ jobs:
         - sanguino1284p
         - sanguino644p
 
-        # Extended STM32 Environments
+        # STM32F1 (Maple) Environments
 
         - STM32F103RC_btt
         - STM32F103RC_btt_USB
@@ -64,38 +64,37 @@ jobs:
         - STM32F103RC_meeb
         - jgaurora_a5s_a1
         - STM32F103VE_longer
+        - mks_robin
+        - mks_robin_lite
+        - mks_robin_pro
+        - STM32F103RET6_creality
+        - mks_robin_nano35
+
+        # STM32 (ST) Environments
+
         - STM32F407VE_black
         - STM32F401VE_STEVAL
         - BIGTREE_BTT002
         - BIGTREE_SKR_PRO
         - BIGTREE_GTR_V1_0
-        - mks_robin
         - mks_robin_stm32
         - ARMED
         - FYSETC_S6
         - STM32F070CB_malyan
         - STM32F070RB_malyan
         - malyan_M300
-        - mks_robin_lite
         - FLYF407ZG
         - rumba32
-        - mks_robin_pro
-        - STM32F103RET6_creality
         - LERDGEX
-        - mks_robin_nano35
         - mks_robin_nano35_stm32
         - NUCLEO_F767ZI
+        - REMRAM_V1
 
         # Put lengthy tests last
 
         - LPC1768
         - LPC1769
 
-        # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
-
-        #- STM32F4
-        #- STM32F7
-
         # Non-working environment tests
         #- at90usb1286_cdc
         #- STM32F103CB_malyan

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -1101,8 +1101,8 @@
 
 // @section homing
 
-//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
-
+//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
+//#define HOME_AFTER_DEACTIVATE   // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
 //#define UNKNOWN_Z_NO_RAISE      // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
 
 #define Z_HOMING_HEIGHT 10        // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
@@ -1293,6 +1293,9 @@
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
   #define ENABLE_LEVELING_FADE_HEIGHT
+  #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+    #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height.
+  #endif
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
   // split up moves into short segments like a Delta. This follows the
@@ -1394,6 +1397,12 @@
   #define LEVEL_CORNERS_HEIGHT      0.0   // (mm) Z height of nozzle at leveling points
   #define LEVEL_CORNERS_Z_HOP       4.0   // (mm) Z height of nozzle between leveling points
   //#define LEVEL_CENTER_TOO              // Move to the center after the last corner
+  //#define LEVEL_CORNERS_USE_PROBE
+  #if ENABLED(LEVEL_CORNERS_USE_PROBE)
+    #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1
+    #define LEVEL_CORNERS_VERIFY_RAISED   // After adjustment triggers the probe, re-probe to verify
+    //#define LEVEL_CORNERS_AUDIO_FEEDBACK
+  #endif
 #endif
 
 /**

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -854,8 +854,6 @@
 #define DEFAULT_MINIMUMFEEDRATE       0.0     // minimum feedrate
 #define DEFAULT_MINTRAVELFEEDRATE     0.0
 
-//#define HOME_AFTER_DEACTIVATE  // Require rehoming after steppers are deactivated
-
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE       0.0     // (mm/s) Minimum feedrate. Set with M205 S.
 #define DEFAULT_MINTRAVELFEEDRATE     0.0     // (mm/s) Minimum travel feedrate. Set with M205 T.
@@ -1084,8 +1082,14 @@
   #if HAS_BED_PROBE
     #define PROBE_OFFSET_WIZARD
     #if ENABLED(PROBE_OFFSET_WIZARD)
-      #define PROBE_OFFSET_START -4.0   // Estimated nozzle-to-probe Z offset, plus a little extra
-      //#define PROBE_OFFSET_WIZARD_XY_POS XY_CENTER // Set a convenient position to do the measurement
+      //
+      // Enable to init the Probe Z-Offset when starting the Wizard.
+      // Use the estimated nozzle-to-probe Z offset, plus a little more.
+      //
+      //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+
+      // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
+      //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
     #endif
   #endif
 
@@ -1180,6 +1184,8 @@
   //#define SD_IGNORE_AT_STARTUP            // Don't mount the SD card when starting up
   //#define SDCARD_READONLY                 // Read-only SD card (to save over 2K of flash)
 
+  //#define GCODE_REPEAT_MARKERS            // Enable G-code M808 to set repeat markers and do looping
+
   #define SD_PROCEDURE_DEPTH 1              // Increase if you need more nested M32 calls
 
   #define SD_FINISHED_STEPPERRELEASE true   // Disable steppers when SD Print is finished

diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h
@@ -122,12 +122,16 @@ inline uint8_t HAL_get_reset_source() { return MCUSR; }
 
 inline void HAL_reboot() {}  // reboot the board or restart the bootloader
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
-extern "C" {
-  int freeMemory();
-}
-#pragma GCC diagnostic pop
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
+extern "C" int freeMemory();
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 // ADC
 #ifdef DIDR2

diff --git a/Marlin/src/HAL/DUE/HAL.h b/Marlin/src/HAL/DUE/HAL.h
@@ -153,10 +153,16 @@ void HAL_init();
 //
 void _delay_ms(const int delay);
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 #ifdef __cplusplus
   extern "C" {

diff --git a/Marlin/src/HAL/ESP32/HAL.h b/Marlin/src/HAL/ESP32/HAL.h
@@ -100,10 +100,16 @@ inline void HAL_reboot() {}  // reboot the board or restart the bootloader
 
 void _delay_ms(int delay);
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 void analogWrite(pin_t pin, int value);
 

diff --git a/Marlin/src/HAL/ESP32/timers.h b/Marlin/src/HAL/ESP32/timers.h
@@ -91,9 +91,11 @@ typedef uint64_t hal_timer_t;
   #define HAL_PWM_TIMER_ISR() extern "C" void pwmTC_Handler()
 #endif
 
-extern "C" void tempTC_Handler();
-extern "C" void stepTC_Handler();
-extern "C" void pwmTC_Handler();
+extern "C" {
+  void tempTC_Handler();
+  void stepTC_Handler();
+  void pwmTC_Handler();
+}
 
 // ------------------------
 // Types

diff --git a/Marlin/src/HAL/HAL.h b/Marlin/src/HAL/HAL.h
@@ -23,6 +23,10 @@
 
 #include "platforms.h"
 
+#ifndef GCC_VERSION
+  #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#endif
+
 #include HAL_PATH(.,HAL.h)
 
 #ifdef SERIAL_PORT_2

diff --git a/Marlin/src/HAL/LINUX/HAL.cpp b/Marlin/src/HAL/LINUX/HAL.cpp
@@ -27,18 +27,13 @@
 HalSerial usb_serial;
 
 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//
 
 // return free heap space

diff --git a/Marlin/src/HAL/LINUX/HAL.h b/Marlin/src/HAL/LINUX/HAL.h
@@ -79,10 +79,16 @@ extern HalSerial usb_serial;
 inline void HAL_init() {}
 
 // Utility functions
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 // ADC
 #define HAL_ADC_VREF           5.0

diff --git a/Marlin/src/HAL/LINUX/include/Arduino.h b/Marlin/src/HAL/LINUX/include/Arduino.h
@@ -67,8 +67,11 @@ void cli(); // Disable
 void sei(); // Enable
 void attachInterrupt(uint32_t pin, void (*callback)(), uint32_t mode);
 void detachInterrupt(uint32_t pin);
-extern "C" void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
-extern "C" void GpioDisableInt(uint32_t port, uint32_t pin);
+
+extern "C" {
+  void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
+  void GpioDisableInt(uint32_t port, uint32_t pin);
+}
 
 // Program Memory
 #define pgm_read_ptr(addr)        (*((void**)(addr)))
@@ -92,9 +95,7 @@ using std::memcpy;
 #define strlen_P strlen
 
 // Time functions
-extern "C" {
-  void delay(const int milis);
-}
+extern "C" void delay(const int milis);
 void _delay_ms(const int delay);
 void delayMicroseconds(unsigned long);
 uint32_t millis();

diff --git a/Marlin/src/HAL/LPC1768/HAL.cpp b/Marlin/src/HAL/LPC1768/HAL.cpp
@@ -32,18 +32,13 @@
 uint32_t HAL_adc_reading = 0;
 
 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//
 
 // return free heap space

diff --git a/Marlin/src/HAL/LPC1768/HAL.h b/Marlin/src/HAL/LPC1768/HAL.h
@@ -107,10 +107,16 @@ extern "C" volatile uint32_t _millis;
 //
 // Utility functions
 //
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 //
 // ADC API

diff --git a/Marlin/src/HAL/LPC1768/MarlinSerial.cpp b/Marlin/src/HAL/LPC1768/MarlinSerial.cpp
@@ -26,30 +26,19 @@
 
 #if USING_SERIAL_0
   MarlinSerial MSerial(LPC_UART0);
-  extern "C" void UART0_IRQHandler() {
-    MSerial.IRQHandler();
-  }
+  extern "C" void UART0_IRQHandler() { MSerial.IRQHandler(); }
 #endif
-
 #if USING_SERIAL_1
   MarlinSerial MSerial1((LPC_UART_TypeDef *) LPC_UART1);
-  extern "C" void UART1_IRQHandler() {
-    MSerial1.IRQHandler();
-  }
+  extern "C" void UART1_IRQHandler() { MSerial1.IRQHandler(); }
 #endif
-
 #if USING_SERIAL_2
   MarlinSerial MSerial2(LPC_UART2);
-  extern "C" void UART2_IRQHandler() {
-    MSerial2.IRQHandler();
-  }
+  extern "C" void UART2_IRQHandler() { MSerial2.IRQHandler(); }
 #endif
-
 #if USING_SERIAL_3
   MarlinSerial MSerial3(LPC_UART3);
-  extern "C" void UART3_IRQHandler() {
-    MSerial3.IRQHandler();
-  }
+  extern "C" void UART3_IRQHandler() { MSerial3.IRQHandler(); }
 #endif
 
 #endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/LPC1768/main.cpp b/Marlin/src/HAL/LPC1768/main.cpp
@@ -31,18 +31,18 @@
 #include <CDCSerial.h>
 #include <usb/mscuser.h>
 
-extern "C" {
-  #include <debug_frmwrk.h>
-}
-
 #include "../../inc/MarlinConfig.h"
 #include "../../core/millis_t.h"
 
 #include "../../sd/cardreader.h"
 
 extern uint32_t MSC_SD_Init(uint8_t pdrv);
-extern "C" int isLPC1769();
-extern "C" void disk_timerproc();
+
+extern "C" {
+  #include <debug_frmwrk.h>
+  extern "C" int isLPC1769();
+  extern "C" void disk_timerproc();
+}
 
 void SysTick_Callback() { disk_timerproc(); }