VerilogBoy

Coding for fun - the hard way. Trying to implement a Game Boy® compatible machine with Verilog.

This project consists of two parts:

An open source Game Boy® compatible console Verilog RTL implementation (the VerilogBoy Core)
An open source FPGA-based handheld game console hardware (the VerilogBoy Handheld, or vbh for short.)

Both are hosted in this repository.

VerilogBoy Core

System Architecture

The main system architecture is designed as follows (outdated):

There are three major parts needs to be implemented: the Game Boy CPU (8-bit CISC Processor called SM83, Intel 8080 like), the PPU (Pixel Processing Unit), and the sound unit (sometimes referred as a PSG, Programmable Sound Generator). Several interfacing modules are needed to support the IO capability provided by the specific hardware (FPGA development board or "VerilogBoy Handheld").

Targets (Ports)

Current Pano Logic G1 is the only supported platform. ML505 and VBH support are planned.

Progress

Refactoring in progress. Current version could run several commerical games with no noticable glitch on the Pano Logic G1 device. 'Master' branch contains the previous version that runs on the ML505.

SM83 CPU (Refactoring stage 1 done, passes all Blargg's tests)
PPU (Pixel Processing Unit, Pixel-FIFO architecture)
OAMDMA (Object Attribute Memory DMA)
PSG (Programmable Sound Generator)
Timer
Link (Dummy link module, allows some games to run in single player mode)

Next step would be improving the accuracy.

Photo of VerilogBoy on Pano G1 running open source GameBoy game Tobu Tobu Girl:

For progress regarding different ports, view README.md under the specific target folder.

Accuracy

This project is not built to be entirely accurate, but built with accuracy in mind. Most of the CPU timing should follow the original DMG-CPU, and implement a rudimentary 2-stage pipelining just as the original one does.

Here are the results of several tests I have tried to run on it.

PPU implementation is ... wrong: There are two pipelines in the GameBoy PPU, one for BG and one for sprite. I only implemented one for both. There is only one fetcher, though.

Note: Tests which depends on the revision / model of GameBoy are omitted. VerilogBoy only focus on behaviors that are common among all monochrome GameBoys (GS).

Blargg's tests

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
cpu instrs	👍	👍	👍	👍	👍	👍

Notes: other tests hasn't been tried.

Mooneye GB acceptance tests

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
add sp e timing	👍	❌	👍	👍	👍	👍
call timing	👍	❌	👍	👍	👍	👍
call timing2	👍	❌	👍	👍	👍	👍
call cc_timing	👍	❌	👍	👍	👍	👍
call cc_timing2	👍	❌	👍	👍	👍	👍
di timing GS	👍	👍	👍	👍	👍	👍
div timing	👍	👍	👍	👍	👍	👍
ei sequence	👍	👍	👍	👍	❌	👍
ei timing	👍	👍	👍	👍	👍	👍
halt ime0 ei	👍	👍	👍	👍	👍	👍
halt ime0 nointr_timing	👍	👍	👍	👍	👍	❌
halt ime1 timing	👍	👍	👍	👍	👍	👍
halt ime1 timing2 GS	👍	👍	👍	👍	👍	❌
if ie registers	👍	👍	👍	👍	👍	❌
intr timing	👍	👍	👍	👍	👍	❌
jp timing	👍	❌	👍	👍	👍	👍
jp cc timing	👍	❌	👍	👍	👍	👍
ld hl sp e timing	👍	❌	👍	👍	👍	👍
oam dma_restart	👍	❌	👍	👍	👍	👍
oam dma start	👍	❌	👍	👍	👍	👍
oam dma timing	👍	❌	👍	👍	👍	👍
pop timing	👍	❌	👍	👍	👍	👍
push timing	👍	❌	❌	👍	👍	👍
rapid di ei	👍	👍	👍	👍	👍	👍
ret timing	👍	❌	👍	👍	👍	👍
ret cc timing	👍	❌	👍	👍	👍	👍
reti timing	👍	❌	👍	👍	👍	👍
reti intr timing	👍	👍	👍	👍	👍	👍
rst timing	👍	❌	❌	👍	👍	👍

Instructions

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
daa	👍	👍	👍	👍	👍	👍

Interrupt handling

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
ie push	👍	❌	❌	❌	❌	👍

OAM DMA

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
basic	👍	👍	👍	👍	👍	👍
reg_read	👍	👍	👍	❌	❌	👍
sources dmgABCmgbS	👍	👍	❌	❌	❌	❌

Serial

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
boot sclk align dmgABCmgb	❌	👍	👍	❌	❌	👍

Note: this test only seems to test the time to finish the first transfer. What about the second? (Delta time required to do a transfer and get notified by the interrupt)

PPU

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
hblank ly scx timing GS	👍	👍	❌	❌	👍	❌
intr 1 2 timing GS	👍	👍	👍	👍	👍	❌
intr 2 0 timing	👍	👍	❌	👍	👍	❌
intr 2 mode0 timing	👍	👍	❌	❌	👍	❌
intr 2 mode3 timing	👍	👍	❌	❌	👍	❌
intr 2 oam ok timing	👍	👍	❌	❌	👍	❌
intr 2 mode0 timing sprites	❌	👍	❌	❌	👍	❌
lcdon timing dmgABCmgbS	❌	👍	❌	❌	❌	❌
lcdon write timing GS	❌	👍	❌	❌	❌	❌
stat irq blocking	❌	👍	👍	❌	👍	❌
stat lyc onoff	❌	👍	❌	❌	❌	❌
vblank stat intr GS	👍	👍	❌	👍	👍	❌

Timer

Test	mooneye-gb	BGB	Gambatte	Higan	MESS	VerilogBoy
div write	👍	👍	❌	👍	👍	👍
rapid toggle	👍	👍	❌	❌	👍	👍
tim00 div trigger	👍	👍	👍	❌	👍	👍
tim00	👍	👍	❌	👍	👍	👍
tim01 div trigger	👍	👍	❌	❌	👍	👍
tim01	👍	👍	👍	👍	👍	👍
tim10 div trigger	👍	👍	❌	❌	👍	👍
tim10	👍	👍	❌	👍	👍	👍
tim11 div trigger	👍	👍	❌	❌	👍	👍
tim11	👍	👍	❌	👍	👍	👍
tima reload	👍	👍	❌	❌	👍	👍
tima write reloading	👍	👍	❌	❌	👍	👍
tma write reloading	👍	👍	❌	❌	👍	👍

Directory Structure

Note: things that will be removed in the near future may not shown here. Not all source files are shown here.

.
├── doc                          -- Documents
│   ├── control_unit.ods           -- CPU control unit LUT
│   ├── cpu_internal.md            -- CPU internal signal encoding
│   └── cpu.md                     -- CPU design note
├── hardware                     -- Hardware source files for VBH
│   └── 3d_models                  -- 3D Model in SolidWorks
├── LICENSE                        -- OHDL for VerilogBoy Core
├── Makefile                     -- Toplevel Makefile
├── README.md                    -- This document
├── roms                         -- Place for platform independent ROMs
│   ├── bootrom.s                  -- VBC Boot ROM
│   ├── Makefile                   -- Makefile for building the Boot ROM
│   └── tests                      -- Unit tests
│       ├── compare.sh               -- Script for comparing results between VBC and emulator
│       ├── dmg_emu.exe              -- Reference emulator
│       └── Makefile                 -- Makefile for running tests
├── rtl                          -- VBC RTL files
│   ├── alu.v                      -- ALU
│   ├── boy.v                      -- VerilogBoy portable top level file
│   ├── brom.v                     -- Boot ROM
│   ├── common.v                   -- Common definitions
│   ├── control.v                  -- Control Unit
│   ├── cpu.v                      -- CPU top level
│   ├── dma.v                      -- OAM DMA
│   ├── Makefile                   -- Makefile for building the VBC using Verilator
│   ├── mbc5.v                     -- Cartridge paging, optional
│   ├── ppu.v                      -- Pixel Processing Unit
│   ├── regfile.v                  -- CPU Register file
│   ├── singleport_ram.v           -- Singleport RAM template
│   ├── singlereg.v                -- Singlebit register template
│   └── timer.v                    -- Timer
├── sim                          -- Simualtion
│   └── verilator                  -- Verilator-based simulator 
│       ├── dispsim.cpp              -- LCD simulator based on SDL 2.0
│       ├── Makefile                 -- Makefile for building the simulator
│       ├── memsim.cpp               -- Boot ROM or Game ROM simulator
│       ├── mmrprobe.cpp             -- Unit for dumping memory or MMR accesses
│       └── vb_sim.cpp               -- Simulator main file
├── target                       -- Targets (ports) of VBC
│   ├── panog1                     -- Pano Logic G1 devices
│   │   ├── fpga                     -- FPGA RTL
│   │   │   ├── dualport_ram.v         -- Template of dual port RAM
│   │   │   ├── idt_clkgen.v           -- Code for interfacing with clock generator
│   │   │   ├── mig                    -- LPDDR memory controller
│   │   │   ├── mig_picorv_bridge.v    -- Bridge for connecting PicoRV32 and LPDDR controller
│   │   │   ├── mig.ucf                -- Timing constraint for memory controller
│   │   │   ├── mobile_ddr.v           -- Simulation model for LPDDR
│   │   │   ├── panog1.xise            -- ISE project file
│   │   │   ├── pano_top.v             -- Top level HDL
│   │   │   ├── pano.ucf               -- Main pin location constraint
│   │   │   ├── picorv32.v             -- PicoRV32 RISC-V softcore
│   │   │   ├── picosoc_mem.v          -- PicoRV32 scratchpad memory
│   │   │   ├── simple_uart.v          -- Simple UART transmitter 
│   │   │   ├── testbench.v            -- Testbench with LPDDR model
│   │   │   ├── usb_picorv_bridge.v    -- Bridge for connecting PicoRV32 and USB controller
│   │   │   ├── vga_font.v             -- VGA font ROM
│   │   │   ├── vga_mixer.v            -- Mixing PicoRV32 and VerilogBoy image
│   │   │   └── vga_timing.v           -- VGA timing generator
│   │   ├── fw                       -- Firmware for RV softcore
│   │   │   ├── bootloader             -- Bootloader for loading firmware from SPI Flash
│   │   │   │   ├── bootloader.c         -- Main source code
│   │   │   │   ├── Makefile             -- Makefile for building the bootloader
│   │   │   │   ├── sections_bl.lds      -- Link script
│   │   │   │   └── start_bl.s           -- Startup code
│   │   │   ├── dhrystone              -- Dhrystone test for RV softcore
│   │   │   ├── firmware               -- Firmware for softcore
│   │   │   │   ├── COPYING              -- GPLv2 License for firmware
│   │   │   │   ├── firmware.c           -- Main source code 
│   │   │   │   ├── isp1760.c            -- ISP1760 HCD
│   │   │   │   ├── isp_roothub.h        -- RootHub emulation for HCD (optional)
│   │   │   │   ├── Makefile             -- Makefile for building the firmware
│   │   │   │   ├── misc.c               -- Delay and other common routines
│   │   │   │   ├── sections.lds         -- Link script
│   │   │   │   ├── syscalls.c           -- Syscalls for the newlib
│   │   │   │   ├── term.c               -- Simple virtual terminal
│   │   │   │   ├── usb.c                -- Host USB stack
│   │   │   │   ├── usb_gamepad.c        -- Generic USB HIB gamepad driver
│   │   │   │   └── usb_storage.c        -- USB mass storage driver
│   │   │   └── README.md              -- README about firmware
│   │   └── README.md                -- README about Pano Logic G1 port
│   └── vbh                        -- VerilogBoy Handheld
│       ├── fpga                     -- FPGA RTL
│       └── fw                       -- Firmware for on-board MCU
└── tools                        -- Tools for building things
    ├── bin2mif                    -- Convert binary blob to mif
    └── vga_timing.xlsx            -- Tool for calculating VGA timing

How to use

Verilator-based simulator

Tested environment: Ubuntu 18.04.2 LTS.

Dependencies: build-essential, verilator, libsdl2-dev, libelf-dev, wine(for unit test only, for now), rgbds(not available from apt, need build manually)

Build

At project directory:

make rtl
make sim

Build the boot ROM:

cd roms
make

Copy the bootrom.mif to where it is required. (For example, target/panog1)

Running unit-tests

At project directory:

cd roms/tests
make
./compare.sh

Please be aware currently tests are broken... (Difference in PC counting)

Running ROMs

At project directory:

./sim/verilator/vb_sim <path_to_your_rom.gb> --nostop

Few parameters:

--nostop: Don't stop execution at halt/stop (but stop at illegal instructions)
--trace: Generate vcd waveform trace
--testmode: Disable internal Boot ROM, headless mode, limit cycles to 32K.
--noboot: Disable internal Boot ROM, code execution starts at 0x0000 rather than 0x0100.
--verbose: Enable debug output

FPGA targets

See README inside target directory.

VerilogBoy Handheld

VerilogBoy Handheld is an open source FPGA-based handheld game console. All design sources of the VerilogBoy Handheld are hosted in this repository.

Note: the architecture is subject to change.

FPGA: Xilinx® Spartan®-6 XC6SLX16
RAM: Using on-board PSRAM for VRAM/WRAM
ROM: Using on-board PSRAM for game cartridge emulation
Video output: 1.54" MIPI-DSI 320x320 IPS TFT-LCD
Audio output: On-board I2S codec (WM8960)

Photo of the Rev. 0.2 prototype:

Acknowledge

This project reused codes from several other projects. A great thanks to their efforts!

These projects are used as references. Again, thanks for sharing.

These are extremely helpful resources about the Game Boy® itself:

Game used for demonstration, thanks for the great game:

https://github.com/SimonLarsen/tobutobugirl

Legalese

I'm not affiliated with Nintendo in any way. Game Boy® is a registered trademark by Nintendo. Nintendo® is a registered trademark. All other trademarks are property of their respective owner.

License

The dsicore is made by twlostow, released under LGPL 3.0.

The PicoRV32 is free and open hardware licensed under the ISC license (a license that is similar in terms to the MIT license or the 2-clause BSD license).

Some firmware code of pano-g1 target are released to public domain.

All other software codes are licensed under GNU GPL 2.0.

All other HDL codes are licensed under OHDL 1.0.

All other text documents are licensed under CC BY-SA 4.0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

VerilogBoy

VerilogBoy Core

System Architecture

Targets (Ports)

Progress

Accuracy

Blargg's tests

Mooneye GB acceptance tests

Instructions

Interrupt handling

OAM DMA

Serial

PPU

Timer

Directory Structure

How to use

Verilator-based simulator

Build

Running unit-tests

Running ROMs

FPGA targets

VerilogBoy Handheld

Acknowledge

Legalese

License

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 275 Commits
doc		doc
hardware		hardware
roms		roms
rtl		rtl
sim/verilator		sim/verilator
target		target
tools		tools
.gitignore		.gitignore
.gitmodules		.gitmodules
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md

License

edbordin/VerilogBoy

Folders and files

Latest commit

History

Repository files navigation

VerilogBoy

VerilogBoy Core

System Architecture

Targets (Ports)

Progress

Accuracy

Blargg's tests

Mooneye GB acceptance tests

Instructions

Interrupt handling

OAM DMA

Serial

PPU

Timer

Directory Structure

How to use

Verilator-based simulator

Build

Running unit-tests

Running ROMs

FPGA targets

VerilogBoy Handheld

Acknowledge

Legalese

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages