pull from torvalds #3
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
All callers of locks_copy_lock pass in a brand new file_lock struct, so there's no need to call locks_release_private on it. Replace that with a warning that fires in the event that we receive a target lock that doesn't look like it's properly initialized. Acked-by: J. Bruce Fields <[email protected]> Signed-off-by: Jeff Layton <[email protected]>
The driver assumes that endpoint 4 is always an interrupt endpoint. Unfortunately the type differs between high-speed and full-speed configurations while in the former case it is indeed an interrupt endpoint this is not true for the latter case - here it is a bulk endpoint. When sending URBs with the wrong type the kernel will generate a warning message including backtrace. In this specific case there will be a huge amount of warnings which can bring the system to freeze. To fix this we are now sending URBs to endpoint 4 using the type found in the endpoint descriptor. A side note: The carl9170 firmware currently specifies endpoint 4 as interrupt endpoint even in the full-speed configuration but this has no relevance because before this firmware is loaded the endpoint type is as described above and after the firmware is running the stick is not reenumerated and so the old descriptor is used. Signed-off-by: Ronald Wahl <[email protected]> Cc: <[email protected]> Signed-off-by: John W. Linville <[email protected]>
Running coccicheck on brcm80211 drivers resulted in following report:
$ make coccicheck MODE=report M=drivers/net/wireless/brcm80211
drivers/net/wireless/brcm80211/brcmfmac/pcie.c:595:2-43:
code aligned with following code on line 596
It revealed that due to a merge failure a block statement lost its
curly braces where it should not.
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
The kbuild robot came up with the following warning: tree: .../kernel/git/linville/wireless-next.git master head: dc6be9f commit: 9a1bb60 [5/13] brcmfmac: Adding msgbuf protocol. coccinelle warnings: drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c:1309:1-28: alloc with no test, possible model on line 1318 Looking into the issue, it turned out that the referred allocation buffer was not being released in failure path nor upon module unload. Reported-by: Fengguang Wu <[email protected]> Reviewed-by: Franky (Zhenhui) Lin <[email protected]> Reviewed-by: Daniel (Deognyoun) Kim <[email protected]> Reviewed-by: Pieter-Paul Giesberts <[email protected]> Signed-off-by: Arend van Spriel <[email protected]> Signed-off-by: John W. Linville <[email protected]>
… after strncpy call Added a guaranteed null-terminate after call to strncpy. Signed-off-by: Rickard Strandqvist <[email protected]> Signed-off-by: John W. Linville <[email protected]>
…/git/viro/vfs
Pull vfs updates from Al Viro:
"Stuff in here:
- acct.c fixes and general rework of mnt_pin mechanism. That allows
to go for delayed-mntput stuff, which will permit mntput() on deep
stack without worrying about stack overflows - fs shutdown will
happen on shallow stack. IOW, we can do Eric's umount-on-rmdir
series without introducing tons of stack overflows on new mntput()
call chains it introduces.
- Bruce's d_splice_alias() patches
- more Miklos' rename() stuff.
- a couple of regression fixes (stable fodder, in the end of branch)
and a fix for API idiocy in iov_iter.c.
There definitely will be another pile, maybe even two. I'd like to
get Eric's series in this time, but even if we miss it, it'll go right
in the beginning of for-next in the next cycle - the tricky part of
prereqs is in this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
fix copy_tree() regression
__generic_file_write_iter(): fix handling of sync error after DIO
switch iov_iter_get_pages() to passing maximal number of pages
fs: mark __d_obtain_alias static
dcache: d_splice_alias should detect loops
exportfs: update Exporting documentation
dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
dcache: remove unused d_find_alias parameter
dcache: d_obtain_alias callers don't all want DISCONNECTED
dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
dcache: d_splice_alias mustn't create directory aliases
dcache: close d_move race in d_splice_alias
dcache: move d_splice_alias
namei: trivial fix to vfs_rename_dir comment
VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
cifs: support RENAME_NOREPLACE
hostfs: support rename flags
shmem: support RENAME_EXCHANGE
shmem: support RENAME_NOREPLACE
btrfs: add RENAME_NOREPLACE
...
This patch adds a MAINTAINERS entry for APM X-Gene SoC ethernet driver. Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Ravi Patel <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch adds documentation for APM X-Gene SoC ethernet DTS binding. Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Ravi Patel <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch adds bindings for APM X-Gene SoC ethernet driver. Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Ravi Patel <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch adds network driver for APM X-Gene SoC ethernet. Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Ravi Patel <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Signed-off-by: Dean Nelson <[email protected]> Reviewed-by: Tobias Klauser <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Iyappan Subramanian says: ==================== net: Add APM X-Gene SoC Ethernet driver support Adding APM X-Gene SoC Ethernet driver. v10: Address comments from v9 review * Documentation: aligned descriptions * simplified struct platform_driver initialization * fixed xgene_enet_mdio_config error path * fixed xgene_enet_init_hw error path * removed statistics spin_lock as it is not required * changed raw_desc fields to type __le64 * defined helper macros for set/get raw_descriptor fields v9: Address comments from v8 review * changed to direct read/write, byteswap into raw descriptor * fixed xgene_enet_create_desc_ring() error handling * removed references to IS_ERR_OR_NULL * disabled half duplex on phy_devce supported/advertising * simplified xgene_enet_adjust_link() function * fixed sparse tool compilation warnings v8: Address comments from v7 review * changed angle bracket to double quotes in header file include. v7: Address comments from v6 review * fixed skb memory leak when dma_map_single fails in xmit. v6: Address comments from v5 review * added basic ethtool support * added ndo_get_stats64 call back * deleted priting Rx error messages * renamed set_bits to xgene_set_bits to fix kbuild error (make ARCH=powerpc) v5: Address comments from v4 review * Documentation: Added phy-handle, reg-names and changed mdio part * dtb: Added reg-names supplemental property * changed platform_get_resource to platform_get_resource_byname * added separate tx/rx set_desc/get_desc functions to do raw_write/raw_read * removed set_desc/get_desc table lookup logic * added error handling logic based on per packet descriptor bits * added software managed Rx packet and error counters * added busy wait for register read/writes * changed mdio_bus->id to avoid conflict * fixed mdio_bus leak in case of mdio_config error * changed phy reg hard coded value to MII_BMSR * changed phy addr hard coded value to phy_device->addr * added paranthesis around macro arguments * converted helper macros to inline functions * changed use of goto's only to common work such as cleanup v4: Address comments from v3 review * MAINTAINERS: changed status to supported * Kconfig: made default to no * changed to bool data type wherever applicable * cleaned up single bit set and masking code * removed statistics counters masking * removed unnecessary OOM message printing * fixed dma_map_single and dma_unmap_single size parameter * changed set bits macro body using new set_bits function v3: Address comments from v2 review * cleaned up set_desc and get_desc functions * added dtb mdio node and phy-handle subnode * renamed dtb phy-mode to phy-connection-type * added of_phy_connect call to connec to PHY * added empty line after last local variable declaration * removed type casting when not required * removed inline keyword from source files * removed CONFIG_CPU_BIG_ENDIAN ifdef v2 * Completely redesigned ethernet driver * Added support to work with big endian kernel * Renamed dtb phyid entry to phy_addr * Changed dtb local-mac-address entry to byte string format * Renamed dtb eth8clk entry to menetclk v1 * Initial version ==================== Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: Ravi Patel <[email protected]> Signed-off-by: Keyur Chudgar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Currently the functionality to untag traffic on input resides
as part of the vlan module and is build only when VLAN support
is enabled in the kernel. When VLAN is disabled, the function
vlan_untag() turns into a stub and doesn't really untag the
packets. This seems to create an interesting interaction
between VMs supporting checksum offloading and some network drivers.
There are some drivers that do not allow the user to change
tx-vlan-offload feature of the driver. These drivers also seem
to assume that any VLAN-tagged traffic they transmit will
have the vlan information in the vlan_tci and not in the vlan
header already in the skb. When transmitting skbs that already
have tagged data with partial checksum set, the checksum doesn't
appear to be updated correctly by the card thus resulting in a
failure to establish TCP connections.
The following is a packet trace taken on the receiver where a
sender is a VM with a VLAN configued. The host VM is running on
doest not have VLAN support and the outging interface on the
host is tg3:
10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243,
offset 0, flags [DF], proto TCP (6), length 60)
10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294837885 ecr 0,nop,wscale 7], length 0
10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244,
offset 0, flags [DF], proto TCP (6), length 60)
10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294838888 ecr 0,nop,wscale 7], length 0
This connection finally times out.
I've only access to the TG3 hardware in this configuration thus have
only tested this with TG3 driver. There are a lot of other drivers
that do not permit user changes to vlan acceleration features, and
I don't know if they all suffere from a similar issue.
The patch attempt to fix this another way. It moves the vlan header
stipping code out of the vlan module and always builds it into the
kernel network core. This way, even if vlan is not supported on
a virtualizatoin host, the virtual machines running on top of such
host will still work with VLANs enabled.
CC: Patrick McHardy <[email protected]>
CC: Nithin Nayak Sujir <[email protected]>
CC: Michael Chan <[email protected]>
CC: Jiri Pirko <[email protected]>
Signed-off-by: Vladislav Yasevich <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for local_info_t. Also, the name of the struct is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for com20020_dev_t. Also, the name of the struct is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for atmel_priv_ioctl. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for local_info_t. Also, the name of the struct is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for fr_hdr and pvc_device. Also, the names of the structs are changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case fr_hdr and a similar one detects the case for pvc_device. @tn1@ type td; @@ typedef struct { ... } td; @script:python tf@ td << tn1.td; tdres; @@ coccinelle.tdres = td; @@ type tn1.td; identifier tf.tdres; @@ -typedef struct + tdres { ... } -td ; @@ type tn1.td; identifier tf.tdres; @@ -td + struct tdres Signed-off-by: Himangi Saraogi <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
…strncpy call Added a guaranteed null-terminate after call to strncpy. Signed-off-by: Rickard Strandqvist <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Support for Atari EtherNEC ROM port adapters in ne.c Signed-off-by: Michael Schmitz <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for port_t, card_status_t and card_t. Also, the names of the structs are changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects two cases and a similar one detects the case for card_t. @tn1@ type td; @@ typedef struct { ... } td; @script:python tf@ td << tn1.td; tdres; @@ coccinelle.tdres = td; @@ type tn1.td; identifier tf.tdres; @@ -typedef struct + tdres { ... } -td ; @@ type tn1.td; identifier tf.tdres; @@ -td + struct tdres Signed-off-by: Himangi Saraogi <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
…file In the Makefile, qlcnic_minidump.o is included twice in the list of object files linked into qlcnic.o. This change removes the superfluous include. Signed-off-by: Andreas Ruprecht <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Current upstream kernel hangs with mips and powerpc targets in uniprocessor mode if SECCOMP is configured. Bisect points to commit dbd9521 ("seccomp: introduce writer locking"). Turns out that code such as BUG_ON(!spin_is_locked(&list_lock)); can not be used in uniprocessor mode because spin_is_locked() always returns false in this configuration, and that assert_spin_locked() exists for that very purpose and must be used instead. Fixes: dbd9521 ("seccomp: introduce writer locking") Cc: Kees Cook <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Kees Cook <[email protected]>
* Enforce CONFIG_RELOCATABLE for the x86 EFI boot stub, otherwise it's possible to overwrite random pieces of unallocated memory during kernel decompression, leading to machine resets. Resolved Conflicts: arch/x86/Kconfig Signed-off-by: H. Peter Anvin <[email protected]>
In the patch called "xen-netback: Turn off the carrier if the guest is not able to receive" NAPI was descheduled when the carrier was set off. That's not what most of the drivers do, and we don't have any specific reason to do so as well, so revert that change. Signed-off-by: Zoltan Kiss <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
* pm-sleep: PM / hibernate: avoid unsafe pages in e820 reserved regions * pm-cpufreq: cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr * pm-cpuidle: cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
* pm-tools: PM / tools: analyze_suspend.py: update to v3.0
spin_is_locked() always return false in uniprocessor configuration and therefore it would be advise to repalce with WARN_ON_SMP(). Signed-off-by: Sanjeev Sharma <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This adds support for specifying the phy to be used with the fec in the devicetree using the standard phy-handle property and also supports fixed-link. Signed-off-by: Sascha Hauer <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: David S. Miller <[email protected]>
There is a long known problem with the netfront/netback interface: if the guest tries to send a packet which constitues more than MAX_SKB_FRAGS + 1 ring slots, it gets dropped. The reason is that netback maps these slots to a frag in the frags array, which is limited by size. Having so many slots can occur since compound pages were introduced, as the ring protocol slice them up into individual (non-compound) page aligned slots. The theoretical worst case scenario looks like this (note, skbs are limited to 64 Kb here): linear buffer: at most PAGE_SIZE - 17 * 2 bytes, overlapping page boundary, using 2 slots first 15 frags: 1 + PAGE_SIZE + 1 bytes long, first and last bytes are at the end and the beginning of a page, therefore they use 3 * 15 = 45 slots last 2 frags: 1 + 1 bytes, overlapping page boundary, 2 * 2 = 4 slots Although I don't think this 51 slots skb can really happen, we need a solution which can deal with every scenario. In real life there is only a few slots overdue, but usually it causes the TCP stream to be blocked, as the retry will most likely have the same buffer layout. This patch solves this problem by linearizing the packet. This is not the fastest way, and it can fail much easier as it tries to allocate a big linear area for the whole packet, but probably easier by an order of magnitude than anything else. Probably this code path is not touched very frequently anyway. Signed-off-by: Zoltan Kiss <[email protected]> Cc: Wei Liu <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Paul Durrant <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
…l-terminate after strncpy call Added a guaranteed null-terminate after call to strncpy. Signed-off-by: Rickard Strandqvist <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The dell_quirks[] DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 5.7 kB. In turn, the callback function can be marked with __init, too. Also the touchpad_led_init() function can be marked __init as it's only referenced from dell_init() -- an __init function. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
The DMI table is already marked as __initconst, so can be the callback functions as they're only used in that context. Signed-off-by: Mathias Krause <[email protected]> Cc: Robert Gerlach <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI tables. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <[email protected]> Cc: Eric Piel <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
These functions are only called from other initialization routines, so can be marked __init, too. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 1.5 kB. In turn, the callback functions can be marked with __init, too. Signed-off-by: Mathias Krause <[email protected]> Cc: Jonathan Woithe <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata, as snd_ctl_new1() will copy the relevant parts, so there is no need to keep the master copies around after initialization. Signed-off-by: Mathias Krause <[email protected]> Cc: Henrique de Moraes Holschuh <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
These variables don't need to be visible outside of this compilation unit, make them static. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Yoga models don't offer touchpad ctrl through the ideapad interface, causing ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
If this is going away, it won't be in 2012. Signed-off-by: Martin Kepplinger <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: Roald Frederickx <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <[email protected]> Cc: Ike Panhc <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
…l/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
…/git/amit/virtio Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
…nel/git/rusty/linux Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
…it/lenb/linux Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
…-x86
Pull x86 platform driver updates from Matthew Garrett:
"A moderate number of changes, but nothing awfully significant.
A lot of const cleanups, some reworking and additions to the rfkill
quirks in the asus driver, a new driver for generating falling laptop
events on Toshibas and some misc fixes.
Maybe vendors have stopped inventing things"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits)
platform/x86: Enable build support for toshiba_haps
Documentation: Add file about toshiba_haps module
platform/x86: Toshiba HDD Active Protection Sensor
asus-nb-wmi: Add wapf4 quirk for the U32U
alienware-wmi: make hdmi_mux enabled on case-by-case basis
ideapad-laptop: Constify DMI table and other r/o variables
asus-nb-wmi.c: Rename x401u quirk to wapf4
compal-laptop: correct invalid hwmon name
toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list
toshiba_acpi: Add extra check to backlight code
Fix log message about future removal of interface
ideapad-laptop: Disable touchpad interface on Yoga models
asus-nb-wmi: Add wapf4 quirk for the X550CC
intel_ips: Make ips_mcp_limits variables static
thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata
fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst
hp-wmi: Add missing __init annotations to initialization code
hp_accel: Constify ACPI and DMI tables
fujitsu-tablet: Mark DMI callbacks as __init code
dell-laptop: Mark dell_quirks[] DMI table as __initconst
...
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
pull from torvalds