Merge pull request SmartThingsCommunity#39559 from SmartThingsCommuni…

…ty/acceptance

Rolling up acceptance to production for deploy

devicetypes/qubino/qubino-dimmer.src/qubino-dimmer.groovy

@@ -122,7 +122,6 @@ def installed() {
 		state.currentPreferencesState."$it.key".value = getPreferenceValue(it)
 		state.currentPreferencesState."$it.key".status = "synced"
 	}
-	readConfigurationFromTheDevice()
 	// Preferences template end
 }
 
@@ -167,13 +166,13 @@ def excludeParameterFromSync(preference){
 	return exclude
 }
 
-private readConfigurationFromTheDevice() {
+private getReadConfigurationFromTheDeviceCommands() {
 	def commands = []
 	parameterMap.each {
 		state.currentPreferencesState."$it.key".status = "reverseSyncPending"
 		commands += zwave.configurationV2.configurationGet(parameterNumber: it.parameterNumber)
 	}
-	sendHubCommand(encapCommands(commands))
+	commands
 }
 
 private syncConfiguration() {
@@ -232,7 +231,15 @@ def configure() {
 	commands << zwave.associationV1.associationSet(groupingIdentifier:5, nodeId:[zwaveHubNodeId])
 	commands << zwave.associationV1.associationSet(groupingIdentifier:6, nodeId:[zwaveHubNodeId])
 	commands << zwave.multiChannelV3.multiChannelEndPointGet()
-	commands + getRefreshCommands()
+	commands += getRefreshCommands()
+
+	// 1% is default Minimum dimming value for dimmers,
+	// when device is set to 1% - it turns off and device does not send any level reports
+	// Minimum dimming value has to be set to 2%, so the device's internal range would be 2-100%
+	// Still, for users it will relatively be 1-100% on the UI and device will report it.
+	// Parameter no. 60 – Minimum dimming value
+	commands << zwave.configurationV2.configurationSet(scaledConfigurationValue: 2, parameterNumber: 60, size: 1)
+	commands += getReadConfigurationFromTheDeviceCommands()
 
 	encapCommands(commands)
 }
@@ -334,7 +341,7 @@ def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd, ep = null) {
 
 	if(input1SwitchType == INPUT_TYPE_POTENTIOMETER) {
 		log.debug "BasicSet: ${cmd} / INPUT_TYPE_POTENTfIOMETER"
-		response(zwave.switchMultilevelV3.switchMultilevelGet())
+		sendHubCommand(encap(zwave.switchMultilevelV3.switchMultilevelGet()))
 	} else if (input1SwitchType == INPUT_TYPE_BI_STABLE_SWITCH) {
 		log.debug "BasicSet: ${cmd} / INPUT_TYPE_BI_STABLE_SWITCH"
 		dimmerEvents(cmd)
@@ -482,6 +489,11 @@ def setLevel(value, duration = null) {
 	commands << zwave.switchMultilevelV3.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration)
 	commands << zwave.switchMultilevelV3.switchMultilevelGet()
 
+	if(supportsPowerMeter()){
+		commands << zwave.meterV2.meterGet(scale: 0)
+		commands << zwave.meterV2.meterGet(scale: 2)
+	}
+
 	encapCommands(commands, getStatusDelay)
 }
 
@@ -570,11 +582,9 @@ private getParameterMap() {[
 		values: [
 			0: "Default value - Mono-stable switch type (push button) – button quick press turns between previous set dimmer value and zero)",
 			1: "Bi-stable switch type (on/off toggle switch)",
-			2: "Potentiometer (applies to Flush Dimmer 0-10V only, dimmer is using set value the last received from potentiometer or from z-wave controller)",
-			3: "0-10V Temperature sensor (regulated output, applies to Flush Dimmer 0-10V only)"
+			2: "Potentiometer (applies to Flush Dimmer 0-10V only, dimmer is using set value the last received from potentiometer or from z-wave controller)"
 		],
-		description: "Set input based on device type (switch, potentiometer, temperature sensor,..)." +
-			"After parameter change to value 3 first exclude module (without setting parameters to default value) then wait at least 30s and then re include the module! "
+		description: "Set input based on device type (mono-stable switch, bi-stable switch, potentiometer)."
 	],
 	[
 			name: "Input 2 switch type (applies to Qubino Flush Dimmer only)", key: "inputsSwitchTypes", type: "enum",

devicetypes/qubino/qubino-flush-2-relay.src/qubino-flush-2-relay.groovy

@@ -24,6 +24,8 @@ metadata {
 		command "reset"
 
 		fingerprint mfr: "0159", prod: "0002", model: "0051", deviceJoinName: "Qubino Switch 1" //Qubino Flush 2 Relay
+		fingerprint mfr: "0159", prod: "0002", model: "0052", deviceJoinName: "Qubino Switch" //Qubino Flush 1 Relay 
+		fingerprint mfr: "0159", prod: "0002", model: "0053", deviceJoinName: "Qubino Switch" //Qubino Flush 1D Relay
 	}
 
 	tiles(scale: 2) {
@@ -70,7 +72,12 @@ metadata {
 }
 
 def installed() {
-	state.numberOfSwitches = 2
+	if (zwaveInfo?.model.equals("0051")) {
+		state.numberOfSwitches = 2
+	} else {
+		state.numberOfSwitches = 1
+	}
+
 	if (!childDevices) {
 		addChildSwitches(state.numberOfSwitches)
 	}
@@ -85,6 +92,9 @@ def installed() {
 		state.currentPreferencesState."$it.key".status = "synced"
 	}
 	// Preferences template end
+	response([
+	       	refresh((1..state.numberOfSwitches).toList())
+	])
 }
 
 def updated() {
@@ -93,7 +103,7 @@ def updated() {
 	}
 	// Preferences template begin
 	parameterMap.each {
-		if (isPreferenceChanged(it)) {
+		if (isPreferenceChanged(it) && !excludeParameterFromSync(it)) {
 			log.debug "Preference ${it.key} has been updated from value: ${state.currentPreferencesState."$it.key".value} to ${settings."$it.key"}"
 			state.currentPreferencesState."$it.key".status = "syncPending"
 		} else if (!state.currentPreferencesState."$it.key".value) {
@@ -104,6 +114,20 @@ def updated() {
 	// Preferences template end
 }
 
+def excludeParameterFromSync(preference){
+	def exclude = false
+	if (preference.key == "outputQ2SwitchSelection") {
+		if (zwaveInfo?.model?.equals("0052") || zwaveInfo?.model?.equals("0053")) {
+			exclude = true
+		}
+	}
+
+	if (exclude) {
+		log.warn "Preference no ${preference.parameterNumber} - ${preference.key} is not supported by this device"
+	}
+	return exclude
+}
+
 private syncConfiguration() {
 	def commands = []
 	parameterMap.each {
@@ -446,6 +470,6 @@ private getParameterMap() {[
 						0: "When system is turned off the output is 0V (NC).",
 						1: "When system is turned off the output is 230V (NO).",
 				],
-				description: "Set value means the type of the device that is connected to the Q2 output. The device type can be normally open (NO) or normally close (NC).  "
+				description: "(Only for Qubino Flush 2 Relay) Set value means the type of the device that is connected to the Q2 output. The device type can be normally open (NO) or normally close (NC).  "
 		]
 ]}

devicetypes/qubino/qubino-flush-shutter.src/qubino-flush-shutter.groovy

@@ -24,7 +24,9 @@ metadata {
 		capability "Configuration"
 
 		//zw:L type:1107 mfr:0159 prod:0003 model:0052 ver:1.01 zwv:4.05 lib:03 cc:5E,86,72,5A,73,20,27,25,26,32,60,85,8E,59,70 ccOut:20,26 epc:2
-		fingerprint mfr: "0159", prod: "0003", model: "0052", deviceJoinName: "Qubino Window Treatment"
+		fingerprint mfr: "0159", prod: "0003", model: "0052", deviceJoinName: "Qubino Window Treatment" // Qubino Flush Shutter (110-230 VAC)
+		//zw:L type:1107 mfr:0159 prod:0003 model:0053 ver:1.01 zwv:4.05 lib:03 cc:5E,86,72,5A,73,20,27,25,26,32,85,8E,59,70 ccOut:20,26
+		fingerprint mfr: "0159", prod: "0003", model: "0053", deviceJoinName: "Qubino Window Treatment" // Qubino Flush Shutter DC
 	}
 
 	tiles(scale: 2) {
@@ -227,23 +229,24 @@ def open() {
 }
 
 def pause() {
-	sendHubCommand(encap(zwave.switchMultilevelV3.switchMultilevelStopLevelChange()))
+	def currentShadeState = device.currentState("windowShade").value
+	if (currentShadeState == "opening" || currentShadeState == "closing") {
+		encap(zwave.switchMultilevelV3.switchMultilevelStopLevelChange())
+	} else {
+		encap(zwave.switchMultilevelV3.switchMultilevelGet())
+	}
 }
 
 def setLevelChild(level, childDni) {
 	setSlats(level)
 }
 
 def setLevel(level) {
-	state.blindsLastCommand = currentLevel > level ? "opening" : "closing"
 	setShadeLevel(level)
 }
 
 def setShadeLevel(level) {
 	log.debug "Setting shade level: ${level}"
-	def currentLevel = Integer.parseInt(device.currentState("shadeLevel").value)
-	state.blindsLastCommand = currentLevel > level ? "opening" : "closing"
-	state.shadeTarget = level
 	encap(zwave.switchMultilevelV3.switchMultilevelSet(value: Math.min(0x63, level)))
 }
 
@@ -257,7 +260,10 @@ def setSlats(level) {
 }
 
 def refresh() {
-	encap(zwave.switchMultilevelV3.switchMultilevelGet())
+	[
+			encap(zwave.switchMultilevelV3.switchMultilevelGet()),
+			encap(zwave.meterV3.meterGet(scale: 0x00)),
+	]
 }
 
 def ping() {
@@ -313,6 +319,9 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelR
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelSet cmd, ep = null) {
+	def currentLevel = Integer.parseInt(device.currentState("shadeLevel").value)
+	state.blindsLastCommand = currentLevel > cmd.value ? "opening" : "closing"
+	state.shadeTarget = cmd.value
 	sendHubCommand(encap(zwave.meterV3.meterGet(scale: 0x02)))
 }
 
@@ -355,7 +364,7 @@ def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd, ep = null)
 			eventMap.value = Math.round(cmd.scaledMeterValue)
 			eventMap.unit = "W"
 			events += createEvent(eventMap)
-			if (cmd.scaledMeterValue) {
+			if (Math.round(cmd.scaledMeterValue)) {
 				events += createEvent([name: "windowShade", value: state.blindsLastCommand])
 				events += createEvent([name: "shadeLevel", value: state.shadeTarget, displayed: false])
 			} else {

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -28,7 +28,7 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "SmartThings Outlet" //Outlet
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "SmartThings Outlet" //Outlet
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Centralite Outlet" //Outlet
-		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "SmartThings Outlet", mnmn: "smartthings", vid: "SmartThings-smartthings-SmartPower_Outlet" //Outlet
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "SmartThings Outlet", mnmn: "SmartThings", vid: "SmartThings-smartthings-SmartPower_Outlet" //Outlet
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0006,0009,0B04", outClusters: "0019", manufacturer: "Samjin", model: "outlet", deviceJoinName: "SmartThings Outlet" //Outlet
 		fingerprint profileId: "0010", inClusters: "0000 0003 0004 0005 0006 0008 0702 0B05", outClusters: "0019", manufacturer: "innr", model: "SP 120", deviceJoinName: "Innr Outlet" //Innr Smart Plug

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -33,6 +33,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "Contact Sensor-A", deviceJoinName: "SYLVANIA Open/Closed Sensor" //Sylvania SMART+ Contact and Temperature Smart Sensor
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 E", deviceJoinName: "Visonic Open/Closed Sensor" //Visonic Door/Window Sensor
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Ecolink", model: "4655BC0-R", deviceJoinName: "Ecolink Open/Closed Sensor", mnmn: "SmartThings", vid: "ecolink-door-sensor" //Ecolink Door/Window Sensor
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Ecolink", model: "DWZB1-ECO", deviceJoinName: "Ecolink Open/Closed Sensor", mnmn: "SmartThings", vid: "ecolink-door-sensor" //Ecolink Door/Window Sensor
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05,FC01,FC02", outClusters: "0003,0019", manufacturer: "iMagic by GreatStar", model: "1116-S", deviceJoinName: "Iris Open/Closed Sensor" //Iris Contact Sensor
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Bosch", model: "RFMS-ZBMS", deviceJoinName: "Bosch Open/Closed Sensor" //Bosch multi-sensor
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Megaman", model: "MS601/z1", deviceJoinName: "INGENIUM Open/Closed Sensor" //INGENIUM ZB Magnetic ON/OFF Sensor

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -135,7 +135,6 @@ private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
 private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
@@ -203,12 +202,9 @@ def ping() {
 
 def refresh() {
 	zigbee.onOffRefresh() +
-			zigbee.levelRefresh() +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-			zigbee.onOffConfig(0, 300) +
-			zigbee.levelConfig()
+	zigbee.levelRefresh() +
+	zigbee.colorTemperatureRefresh() +
+	zigbee.hueSaturationRefresh()
 }
 
 def configure() {
@@ -217,17 +213,24 @@ def configure() {
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
 	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh()
+
+	def cmds = []
+	if(device.currentState("colorTemperature")?.value == null) {
+		cmds +=	zigbee.setColorTemperature(5000)
+	}
+
+	cmds += refresh() +
+	// OnOff, level minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+	zigbee.onOffConfig(0, 300) +
+	zigbee.levelConfig(0, 300)
+	cmds
 }
 
 def setColorTemperature(value) {
 	value = value as Integer
-	def tempInMired = Math.round(1000000 / value)
-	def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
 
-	zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+	zigbee.setColorTemperature(value) +
+	zigbee.colorTemperatureRefresh()
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -262,20 +265,19 @@ private getScaledSaturation(value) {
 def setColor(value){
 	log.trace "setColor($value)"
 	zigbee.on() +
-			zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-					getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.hueSaturationRefresh()
 }
 
 def setHue(value) {
 	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
 	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-			zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -117,6 +117,9 @@ metadata {
 		// Third Reality
 		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019", manufacturer: "Third Reality, Inc", model: "3RSL011Z", deviceJoinName: "RealityLight Light" //RealityLight
 		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019", manufacturer: "Third Reality, Inc", model: "3RSL012Z", deviceJoinName: "RealityLight Light" //RealityLight
+
+		// Ajax Online
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", manufacturer: "Ajax Online", model: "CCT", deviceJoinName: "Ajax Light", mnmn: "SmartThings", vid: "generic-color-temperature-bulb-2200K-6500K" // Ajax Online Filament Bulb
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-window-shade.src/zigbee-window-shade.groovy

@@ -33,6 +33,7 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0102", outClusters: "000A", manufacturer: "Feibit Co.Ltd", model: "FTB56-ZT218AK1.8", deviceJoinName: "Wistar Window Treatment" //Wistar Curtain Motor(CMJ)
 		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0102", outClusters: "0003", manufacturer: "REXENSE", model: "KG0001", deviceJoinName: "Window Treatment" //Smart Curtain Motor(BCM300D)
 		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0102", outClusters: "0003", manufacturer: "REXENSE", model: "DY0010", deviceJoinName: "Window Treatment" //Smart Curtain Motor(DT82TV)
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0102", outClusters: "0003", manufacturer: "SOMFY", model: "Glydea Somfy", deviceJoinName: "Somfy Window Treatment" //Somfy Glydea Ultra
 	}
 
 	preferences {
@@ -193,7 +194,7 @@ def pause() {
 }
 
 def presetPosition() {
-    setLevel(preset ?: 50)
+	setLevel(preset ?: 50)
 }
 
 /**
@@ -271,7 +272,7 @@ private List readDeviceBindingTable() {
 }
 
 def shouldInvertLiftPercentage() {
-	return isIkeaKadrilj() || isIkeaFyrtur()
+	return isIkeaKadrilj() || isIkeaFyrtur() || isSomfyGlydea()
 }
 
 def reportsBatteryPercentage() {
@@ -285,3 +286,7 @@ def isIkeaKadrilj() {
 def isIkeaFyrtur() {
 	device.getDataValue("model") == "FYRTUR block-out roller blind"
 }
+
+def isSomfyGlydea() {
+	device.getDataValue("model") == "Glydea Somfy"
+}

devicetypes/smartthings/zwave-basic-window-shade.src/zwave-basic-window-shade.groovy

@@ -27,6 +27,8 @@ metadata {
 
 		fingerprint mfr:"0086", prod:"0003", model:"008D", deviceJoinName: "Aeotec Window Treatment" //Aeotec Nano Shutter
 		fingerprint mfr:"0086", prod:"0103", model:"008D", deviceJoinName: "Aeotec Window Treatment" //Aeotec Nano Shutter
+		fingerprint mfr:"0371", prod:"0003", model:"008D", deviceJoinName: "Aeotec Window Treatment" //Aeotec Nano Shutter
+		fingerprint mfr:"0371", prod:"0103", model:"008D", deviceJoinName: "Aeotec Window Treatment" //Aeotec Nano Shutter
 	}
 
 	tiles(scale: 2) {
@@ -137,7 +139,7 @@ def ping() {
 def installed() {
 	log.debug "Installed ${device.displayName}"
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	sendEvent(name: "availableCurtainPowerButtons", value: JsonOutput.toJson(["open", "close", "pause"]))
+	sendEvent(name: "availableCurtainPowerButtons", value: JsonOutput.toJson(["open", "close", "pause"]), displayed: false)
 	state.shadeState = "paused"
 	state.reverseDirection = reverseDirection ? reverseDirection : false
 }
@@ -149,7 +151,10 @@ def updated() {
 
 def configure() {
 	log.debug "Configure..."
-	response(secure(zwave.configurationV1.configurationSet(parameterNumber: 80, size: 1, scaledConfigurationValue: 1)))
+	response([
+			secure(zwave.configurationV1.configurationSet(parameterNumber: 80, size: 1, scaledConfigurationValue: 1)),
+			secure(zwave.configurationV1.configurationSet(parameterNumber: 85, size: 1, scaledConfigurationValue: 1))
+	])
 }
 
 private secure(cmd) {