2.10.00-Beta: Lidl/Silvercrest TS0211 not recognized as button #4450

MartinAirN · 2021-02-19T18:03:46Z

Please note: The device here is named either ts0211_4, ts0211_5 or ts0211_6. That is due to re-pairing, after deleting the device through the rest-api.

Describe the bug

The Lidl/Silvercrest TS0211 should now in deconz (not Phoscon) be supported after Pull Request #4282.

It connects to the network, and is named as expected. If I then understand how a device that is not yet supported by Phoscon should work, is that it should be working in 3rd party apps as just a button in this case. That it does not.

Steps to reproduce the behavior

Make sure the device is out of the network if it was there before
In Phoscon click "Add new switch" and follow the "Other" steps
Press connect button on TS0211 3 times within 2 seconds
It should then appear on the Deconz network as connected (see below for screenshot) (Phoscon doesnt see it)
Go to 3rd party app, such as Home-Assistant (HA)
TS0211 should be listed as a device
Open device details -> No battery status
Try to link device to automation -> No Button options
Wait X time (30-60min I have seen)
HA -> Open device details -> battery status
HA -> Try to link device to automation -> No Button options

ps. Instead of using HA, the rest-api can also be used. This will not directly list the battery status and will list buttonevent as "null"

listening to the deconz_event in HA lists a button event on button press:

{
    "event_type": "deconz_event",
    "data": {
        "id": "ts0211_5",
        "unique_id": "84:2e:14:ff:fe:f5:ba:31",
        "event": null,
        "device_id": "0353c501997e6ca6418c159aaddfb112"
    },
    "origin": "LOCAL",
    "time_fired": "2021-02-19T10:30:10.348084+00:00",
    "context": {
        "id": "5c5e5baa12933becbcc6f019b6e7099d",
        "parent_id": null,
        "user_id": null
    }
}

Expected behavior

Phoscon should see the device as pairing as a Switch device, it does see it if pairing as a sensor device. (not in the UI just the pairing action)
Step 7 & 8 should have battery status & button options

Screenshots

Screenshot of device info in Deconz:

Screenshot of Home-Assistant reading the device:

Note there is no battery level listed. Nor in HA is the fact it should be a button recognized.

Rest-API sensor read (after waiting for the battery status to show):

{
  "config": {
    "battery": 100,
    "enrolled": 1,
    "on": true,
    "pending": [],
    "reachable": true
  },
  "ep": 1,
  "etag": "38dfea563aa02567c8c3dfd7b8f9fc56",
  "lastseen": "2021-02-19T16:37Z",
  "manufacturername": "SILVERCREST",
  "mode": 1,
  "modelid": "TS0211",
  "name": "TS0211 6",
  "state": {
    "buttonevent": null,
    "lastupdated": "2021-02-19T16:37:42.966",
    "lowbattery": false,
    "tampered": false
  },
  "swversion": "2020.8.4",
  "type": "ZHASwitch",
  "uniqueid": "84:2e:14:ff:fe:f5:ba:31-01-0500"
}

Environment

Host system: NAS
Running method: Marthoc Docker container
Firmware version: (26680700)
deCONZ version: (2.10.00)
Device: ConBee II
Do you use an USB extension cable: yes
Is there any other USB or serial devices connected to the host system?: no

deCONZ Logs

Click on button event:

17:37:41:955 APS-DATA.indication srcAddr: 0x3e47, srcEp: 0x01 dstAddrMode: 2, profile: 0x0104, cluster: 0x0500, lqi: 255, rssi: -26
17:37:41:955     asdu: 097d00050000640000
17:37:41:956 APS-DATA.request id: 65, addrmode: 0x02, addr: 0x3e47, profile: 0x0104, cluster: 0x0500, ep: 0x01 -> 0x01 queue: 0 len: 5 tx.options 0x00
17:37:41:956 [INFO] - No button map for: TS0211, unicast to: 0x0000, endpoint: 0x01, cluster: IAS_ZONE (0x0500), command: STATUS_CHANGE (0x00), payload: 050000640000, zclSeq: 125

Additional context

Other devices in the network:

The text was updated successfully, but these errors were encountered:

Smanar · 2021-02-19T20:11:20Z

{
  "config": {
    "battery": 100,
    "enrolled": 1,
    "on": true,
    "pending": [],
    "reachable": true
  },
  "ep": 1,
  "etag": "38dfea563aa02567c8c3dfd7b8f9fc56",
  "lastseen": "2021-02-19T16:37Z",
  "manufacturername": "SILVERCREST",
  "mode": 1,
  "modelid": "TS0211",
  "name": "TS0211 6",
  "state": {
    "buttonevent": null,
    "lastupdated": "2021-02-19T16:37:42.966",
    "lowbattery": false,
    "tampered": false
  },
  "swversion": "2020.8.4",
  "type": "ZHASwitch",
  "uniqueid": "84:2e:14:ff:fe:f5:ba:31-01-0500"
}

"buttonevent": null,

Ok there is probably an issue (perhaps the device is missing in button_maps.json), but the device is clearly a switch from the JSON.

MartinAirN · 2021-02-25T07:10:36Z

If the device missing from button_maps.json could be the reason for the switch not being usable as a switch perhaps @jurriaan has these changes at the ready based on the original PR.

jurriaan · 2021-02-25T08:34:18Z

Not sure how this is supposed to work, I just listen to the button events and that works fine here.

Should a pushbutton even be registered as a switch?

SwoopX · 2021-02-25T11:17:54Z

If the device missing from button_maps.json could be the reason for the switch not being usable as a switch perhaps @jurriaan has these changes at the ready based on the original PR.

Yes, that indeed seems to be the case.

knutbrecht · 2021-03-15T15:52:40Z

ist there any solution for that?
I got the exact same behaviour - device is not recognized as a butten. It is recognized as a sensor (why?) but not listed in Phoscon.
It is listed in deconz objects (iobroker in my case) but no correct behavior when buuton is pushed. There is someting happening but the "button" object is not changing.

Has anyone succeeded integrating the doorbell correctly?

MartinAirN · 2021-03-16T06:19:51Z

ist there any solution for that?

I have been trying to get a button_maps.json entry going for this one. But as its my first time trying, no clue if/when I will figure out what the contents should be.

So if anyone has a manual or list of logs he/she needs from me feel free to comment/ask.

Typ1er · 2021-03-21T22:55:20Z

I have the same problem in FHEM, the readings always stay at "zero", but the timestamp is rewritten. So it does not really work unfortunately.

SwoopX · 2021-03-22T00:11:11Z

Just had a look at the PR, the implementation is wrong and it should have never exposed as a switch. Correct would have been to expose it as alarm sensor.

Mimiix · 2021-03-23T08:29:30Z

@SwoopX What would be the next steps?

SwoopX · 2021-03-24T19:50:19Z

The resource type should just be changed from ZHASwitch to ZHAAlarm so the alarm resource gets exposed, which then can be used to take whatever action.

I guess I can do that somewhere next week.

github-actions · 2021-04-17T01:51:10Z

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

MartinAirN · 2021-04-17T10:29:33Z

This issue is currently waiting for the Merge of the fix #4652.

github-actions · 2021-05-09T02:25:48Z

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

MartinAirN · 2021-05-10T06:33:49Z

As #4652 has been closed by @SwoopX this is still an issue.

Using the latest deconz version and re-pairing the TS0211 Silvercrest Doorbell it is only reporting its battery status to other clients and not behaving as a button nor alarm.

T0mWz · 2021-05-10T07:19:34Z

However, pull request #4652 is closed and not merged, so it's not clear to me of it's now fixed or still open. Will try myself too, to see what's happens now. @SwoopX was your change now integrated / merged somehow? 😃

MartinAirN · 2021-05-10T07:22:10Z

@T0mWz Indeed, #4652 is closed that is why the issue is still open and I confirmed on the latest version the behavior was not fixed by another change.

SwoopX · 2021-05-30T23:37:53Z

Can someone please check with debug enabled if such an event gets generated on press and release (and please also share the lines)?

[INFO] - No button map for: TS0211, unicast to: 0x0000, endpoint: 0x01, cluster: IAS_ZONE (0x0500), command: STATUS_CHANGE (0x00), payload: 050000640000, zclSeq: 125

T0mWz · 2021-05-31T09:25:41Z

Hi @SwoopX ,

Have started deconz with DEBUG_INFO=2. See not more logging information as already provided by @MartinAirN .

11:26:20:436 APS-DATA.indication srcAddr: 0x9dcb, srcEp: 0x01 dstAddrMode: 2, profile: 0x0104, cluster: 0x0500, lqi: 215, rssi: -67
11:26:20:439 enqueue event state/lastupdated for /sensors/43
11:26:20:439 APS-DATA.request id: 42, addrmode: 0x02, addr: 0x9dcb, profile: 0x0104, cluster: 0x0500, ep: 0x01 -> 0x01 queue: 1 len: 5 tx.options 0x00
11:26:20:440 [INFO] - No button map for: TS0211, unicast to: 0x0000, endpoint: 0x01, cluster: IAS_ZONE (0x0500), command: STATUS_CHANGE (0x00), payload: 050000640000, zclSeq: 110
11:26:20:441 Websocket 192.168.112.3:60166 send message: {"e":"changed","id":"43","r":"sensors","state":{"buttonevent":0,"lastupdated":"2021-05-31T09:26:20.439","lowbattery":false,"tampered":false},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"} (ret = 198)
11:26:20:468 APS-DATA.confirm id: 42, status: 0x00 SUCCESS
11:26:20:469 APS-DATA.confirm request id: 42 -> erase from queue

T0mWz · 2021-06-08T19:29:52Z

Hi @Kane610,

Do think that also for the Lidl TS0211 support is required within HA? Here we encounter the issue as with the Ikea Shortcut Button, were the device registered without any further option within HA.

Thanks for your help!

Kane610 · 2021-06-08T19:43:36Z

Hi @Kane610,

Do think that also for the Lidl TS0211 support is required within HA? Here we encounter the issue as with the Ikea Shortcut Button, were the device registered without any further option within HA.

Thanks for your help!

Yeah it's not supported today. Supported units can be seen here https://github.com/home-assistant/core/blob/eb687b733233c8aa97b7963b9b522808ed65d711/homeassistant/components/deconz/device_trigger.py#L525

Open an issue and be as detailed as possible. But not deconz logs but events from within hass

T0mWz · 2021-06-09T08:45:19Z

Hi @Kane610,
Do think that also for the Lidl TS0211 support is required within HA? Here we encounter the issue as with the Ikea Shortcut Button, were the device registered without any further option within HA.
Thanks for your help!

Yeah it's not supported today. Supported units can be seen here https://github.com/home-assistant/core/blob/eb687b733233c8aa97b7963b9b522808ed65d711/homeassistant/components/deconz/device_trigger.py#L525

Open an issue and be as detailed as possible. But not deconz logs but events from within hass

I see in logs the follow messages when I push the (single) button on this device ;

Deconz;

10:45:43:907 [INFO] - No button map for: HG06668, unicast to: 0x0000, endpoint: 0x01, cluster: IAS_ZONE (0x0500), command: STATUS_CHANGE (0x00), payload: 050000640000, zclSeq: 87
10:45:43:911 Websocket 172.19.0.3:32934 send message: {"e":"changed","id":"51","r":"sensors","state":{"lastupdated":"2021-06-09T08:45:43.904","lowbattery":false,"tampered":false},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"} (ret = 182)

HA;

2021-06-09 10:45:43 DEBUG (MainThread) [pydeconz.websocket] {"e":"changed","id":"51","r":"sensors","state":{"lastupdated":"2021-06-09T08:45:43.904","lowbattery":false,"tampered":false},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"}

Is this implementation correct enough for HA @Kane610 ? I just started with HA, so I have not yet an idea of the design principes 😅

Kane610 · 2021-06-09T09:05:00Z

Is this implementation correct enough for HA @Kane610 ? I just started with HA, so I have not yet an idea of the design principes 😅

The HA event is what I need, but it needs to contain "buttonpress": 100x in them to be relevant, I need a mapping between that event and what you did to generate it e.g. short press -> 1001, release after short press -> 1002, etc.

I also need a modelid

T0mWz · 2021-06-09T11:04:29Z

@SwoopX can you help out here ? 😅 Can you make a device mapping somehow?

Some HA logs already;

2021-06-09 13:03:05 DEBUG (MainThread) [pydeconz.websocket] {"e":"added","id":"51","r":"sensors","sensor":{"config":{"battery":null,"enrolled":1,"on":true,"pending":[],"reachable":true},"ep":1,"etag":"738cd5d0da54d7348aa4db531a82df4e","id":"51","lastseen":"2021-06-09T11:03Z","manufacturername":"LIDL Silvercrest","mode":1,"modelid":"HG06668","name":"Switch 51","state":{"buttonevent":null,"lastupdated":"2021-06-09T11:02:54.994","lowbattery":false,"tampered":false},"type":"ZHASwitch","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"}

2021-06-09 13:03:23 DEBUG (MainThread) [pydeconz.websocket] {"e":"changed","id":"51","r":"sensors","state":{"lastupdated":"2021-06-09T11:03:23.044","lowbattery":false,"tampered":false},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"}
2021-06-09 13:03:24 DEBUG (MainThread) [pydeconz.websocket] {"e":"changed","id":"51","r":"sensors","state":{"lastupdated":"2021-06-09T11:03:24.881","lowbattery":false,"tampered":false},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"}

Some extra deconz logs, not sure of this needed;

13:06:49:194 device announce 0x842E14FFFEF94ACA (0x04E1) mac capabilities 0x80
13:06:49:194 set fast probe address to 0x842E14FFFEF94ACA (0x04E1)
13:06:49:195 FP indication 0x0000 / 0x0013 (0x842E14FFFEF94ACA / 0x04E1)
13:06:49:195                       ...     (0x842E14FFFEF94ACA / 0x04E1)
13:06:49:196 device announce 0x842E14FFFEF94ACA (0x04E1) mac capabilities 0x80
13:06:49:198 Websocket 172.19.0.3:40058 send message: {"config":{"enrolled":1,"on":true,"pending":[],"reachable":true},"e":"changed","id":"51","r":"sensors","t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"} (ret = 160)
13:06:49:200 don't create binding for attribute reporting of sensor Switch 51
13:06:49:201 skip check bindings for client clusters (no group)
13:06:49:203 Websocket 172.19.0.3:40058 send message: {"e":"added","id":"51","r":"sensors","sensor":{"config":{"battery":null,"enrolled":1,"on":true,"pending":[],"reachable":true},"ep":1,"etag":"635822115326cf0552a4765c3cdad289","id":"51","lastseen":"2021-06-09T11:06Z","manufacturername":"LIDL Silvercrest","mode":1,"modelid":"HG06668","name":"Switch 51","state":{"buttonevent":null,"lastupdated":"2021-06-09T11:06:38.244","lowbattery":false,"tampered":false},"type":"ZHASwitch","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"} (ret = 529)

13:06:50:284 DB sql exec REPLACE INTO sensors (sid, name, type, modelid, manufacturername, uniqueid, swversion, state, config, fingerprint, deletedState, mode) VALUES ('51', 'Switch 51', 'ZHASwitch', 'HG06668', 'LIDL Silvercrest', '84:2e:14:ff:fe:f9:4a:ca-01-0500', '', '{"buttonevent":null,"lastupdated":"2021-06-09T11:06:38.244","lowbattery":false,"tampered":false}', '{"battery":null,"enrolled":1,"on":true,"pending":0,"reachable":true}', '{"d":1026,"ep":1,"in":[0,1,1280],"p":260}', 'normal', '1')
13:06:50:284 DB sql exec UPDATE devices SET nwk = 1249 WHERE mac = '84:2e:14:ff:fe:f9:4a:ca';INSERT INTO devices (mac,nwk,timestamp) SELECT '84:2e:14:ff:fe:f9:4a:ca', 1249, strftime('%s','now') WHERE (SELECT changes() = 0);

13:09:01:248 enqueue event config/localtime for /config/
13:09:01:660 APS-DATA.indication srcAddr: 0x04e1, srcEp: 0x01 dstAddrMode: 2, profile: 0x0104, cluster: 0x0500, lqi: 255, rssi: -55
13:09:01:660 enqueue event state/lastupdated for /sensors/51
13:09:01:661 APS-DATA.request id: 137, addrmode: 0x02, addr: 0x04e1, profile: 0x0104, cluster: 0x0500, ep: 0x01 -> 0x01 queue: 0 len: 5 tx.options 0x00
13:09:01:661 FP indication 0x0104 / 0x0500 (0x842E14FFFEF94ACA / 0x04E1)
13:09:01:661                       ...     (0x842E14FFFEF94ACA / 0x04E1)
13:09:01:661 [INFO] - No button map for: HG06668, unicast to: 0x0000, endpoint: 0x01, cluster: IAS_ZONE (0x0500), command: STATUS_CHANGE (0x00), payload: 050000640000, zclSeq: 112
13:09:01:663 Websocket 172.19.0.3:40058 send message: {"e":"changed","id":"51","r":"sensors","state":{"lastupdated":"2021-06-09T11:09:01.660","lowbattery":false,"tampered":false},"t":"event","uniqueid":"84:2e:14:ff:fe:f9:4a:ca-01-0500"} (ret = 182)

Kane610 · 2021-06-09T11:17:59Z

I'll unsubscribe to this issue. Create an issue on https://github.com/Kane610/deconz once deCONZ support is verified to work.

MartinAirN added the Bug report label Feb 19, 2021

SwoopX linked a pull request Mar 27, 2021 that will close this issue

Change Lidl/Silvercrest Smart Wireless Door Bell from ZHASwitch to ZHAAlarm resource #4652

Closed

SwoopX added the Device Improvement Additional tag to attach to a existing issue. label Mar 27, 2021

github-actions bot added the stale label Apr 17, 2021

github-actions bot removed the stale label Apr 18, 2021

github-actions bot added the stale label May 9, 2021

github-actions bot removed the stale label May 11, 2021

SwoopX linked a pull request Jun 11, 2021 that will close this issue

Add button map for LIDL doorbell #4999

Merged

SwoopX mentioned this issue Jun 11, 2021

Add button map for LIDL doorbell #4999

Merged

manup closed this as completed in #4999 Jun 13, 2021

T0mWz mentioned this issue Jun 16, 2021

[FR] Add support for Lidl Smart Wireless Door Bell Kane610/deconz#124

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

2.10.00-Beta: Lidl/Silvercrest TS0211 not recognized as button #4450

2.10.00-Beta: Lidl/Silvercrest TS0211 not recognized as button #4450

MartinAirN commented Feb 19, 2021 •

edited

Loading

Smanar commented Feb 19, 2021 •

edited

Loading

MartinAirN commented Feb 25, 2021

jurriaan commented Feb 25, 2021

SwoopX commented Feb 25, 2021

knutbrecht commented Mar 15, 2021

MartinAirN commented Mar 16, 2021

Typ1er commented Mar 21, 2021

SwoopX commented Mar 22, 2021

Mimiix commented Mar 23, 2021

SwoopX commented Mar 24, 2021 •

edited

Loading

github-actions bot commented Apr 17, 2021

MartinAirN commented Apr 17, 2021

github-actions bot commented May 9, 2021

MartinAirN commented May 10, 2021

T0mWz commented May 10, 2021 •

edited

Loading

MartinAirN commented May 10, 2021 •

edited

Loading

SwoopX commented May 30, 2021

T0mWz commented May 31, 2021 •

edited

Loading

T0mWz commented Jun 8, 2021 •

edited

Loading

Kane610 commented Jun 8, 2021

T0mWz commented Jun 9, 2021 •

edited

Loading

Kane610 commented Jun 9, 2021

T0mWz commented Jun 9, 2021 •

edited

Loading

Kane610 commented Jun 9, 2021

2.10.00-Beta: Lidl/Silvercrest TS0211 not recognized as button #4450

2.10.00-Beta: Lidl/Silvercrest TS0211 not recognized as button #4450

Comments

MartinAirN commented Feb 19, 2021 • edited Loading

Describe the bug

Steps to reproduce the behavior

Expected behavior

Screenshots

Environment

deCONZ Logs

Additional context

Smanar commented Feb 19, 2021 • edited Loading

MartinAirN commented Feb 25, 2021

jurriaan commented Feb 25, 2021

SwoopX commented Feb 25, 2021

knutbrecht commented Mar 15, 2021

MartinAirN commented Mar 16, 2021

Typ1er commented Mar 21, 2021

SwoopX commented Mar 22, 2021

Mimiix commented Mar 23, 2021

SwoopX commented Mar 24, 2021 • edited Loading

github-actions bot commented Apr 17, 2021

MartinAirN commented Apr 17, 2021

github-actions bot commented May 9, 2021

MartinAirN commented May 10, 2021

T0mWz commented May 10, 2021 • edited Loading

MartinAirN commented May 10, 2021 • edited Loading

SwoopX commented May 30, 2021

T0mWz commented May 31, 2021 • edited Loading

T0mWz commented Jun 8, 2021 • edited Loading

Kane610 commented Jun 8, 2021

T0mWz commented Jun 9, 2021 • edited Loading

Kane610 commented Jun 9, 2021

T0mWz commented Jun 9, 2021 • edited Loading

Kane610 commented Jun 9, 2021

MartinAirN commented Feb 19, 2021 •

edited

Loading

Smanar commented Feb 19, 2021 •

edited

Loading

SwoopX commented Mar 24, 2021 •

edited

Loading

T0mWz commented May 10, 2021 •

edited

Loading

MartinAirN commented May 10, 2021 •

edited

Loading

T0mWz commented May 31, 2021 •

edited

Loading

T0mWz commented Jun 8, 2021 •

edited

Loading

T0mWz commented Jun 9, 2021 •

edited

Loading

T0mWz commented Jun 9, 2021 •

edited

Loading