GitHub

Asynch Mode for NGINX*

Introduction
Licensing
Features
Hardware Requirements
Software Requirements
Additional Information
Limitations
Installation Instructions
SSL Engine Framework for Configuration
Support for Nginx Side Polling
- External Polling Mode
- Heuristic Polling Mode
QATzip Module Configuration
QAT Sample Configuration
Known Issues
Intended Audience
Legal

Introduction

Nginx* [engine x] is an HTTP and reverse proxy server, a mail proxy server, and a generic TCP/UDP proxy server, originally written by Igor Sysoev. This project provides an extended Nginx working with asynchronous mode OpenSSL*. With Intel® QuickAssist Technology (QAT) acceleration, Asynch Mode for NGINX* can provide significant performance improvement.

Licensing

The Licensing of the files within this project is:

Asynch Mode for NGINX* - BSD License. Please see the LICENSE file contained in the top level folder. Further details can be found in the file headers of the relevant files.

Features

Asynchronous Mode in SSL/TLS processing (including http/stream/mail/proxy module)
SSL Engine Framework for engine configuration
Support for external polling mode and heursitic polling mode
Release hardware resource during worker is shutting down (For more details information, please read modules/nginx_qat_module/README)
Support OpenSSL Cipher PIPELINE feature
Support QATzip module to accelerate GZIP compression with Intel® Quickassist Technology
Support software fallback for asymmetric cryptography algorithms.
Support [QAT Engine multibuffer feature][10] [10]:https://github.com/intel/QAT_Engine#intel-qat-openssl-engine-multibuffer-support
Support FreeBSD Operating System.

Hardware Requirements

Asynch Mode for NGINX* supports Crypto and Compression offload to the following acceleration devices:

Software Requirements

This release was validated on the following:

Asynch Mode for NGINX* has been tested with the latest Intel® QuickAssist Acceleration Driver. Please download the QAT driver from the link https://www.intel.com/content/www/us/en/developer/topic-technology/open/quick-assist-technology/overview.html
OpenSSL-3.0.10
QAT engine v1.3.1
QATzip v1.1.2

Additional Information

Asynch Mode for NGINX* is developed based on Nginx-1.22.1.
Generate patch against official Nginx-1.22.1.

  git clone https://github.com/intel/asynch_mode_nginx.git
  wget http://nginx.org/download/nginx-1.22.1.tar.gz
  tar -xvzf nginx-1.22.1.tar.gz
  diff -Naru -x .git nginx-1.22.1 asynch_mode_nginx > async_mode_nginx_1.22.1.patch

Apply patch to official Nginx-1.22.1.

  wget http://nginx.org/download/nginx-1.22.1.tar.gz
  tar -xvzf nginx-1.22.1.tar.gz
  patch -p0 < async_mode_nginx_1.22.1.patch

Generate patch against github official read-only mirror

  git clone https://github.com/intel/asynch_mode_nginx.git
  wget https://github.com/nginx/nginx/archive/release-1.22.1.tar.gz
  tar -xvzf release-1.22.1.tar.gz
  diff -Naru -x .git -x .hgtags nginx-release-1.22.1 asynch_mode_nginx > async_mode_nginx_1.22.1.patch

Apply patch to the github release pachage.

  wget https://github.com/nginx/nginx/archive/release-1.22.1.tar.gz
  tar -xvzf release-1.22.1.tar.gz
  patch -p0 < async_mode_nginx_1.22.1.patch

Asynch Mode for NGINX* SSL engine framework provides new directives:

Directives

Syntax:     ssl_asynch on | off;
Default:    ssl_asynch off;
Context:    stream, mail, http, server

    Enables SSL/TLS asynchronous mode

Example

file: conf/nginx.conf

    http {
        ssl_asynch  on;
        server {...}
    }

    stream {
        ssl_asynch  on;
        server {...}
    }

Directives

Syntax:     proxy_ssl_asynch on | off;
Default:    proxy_ssl_asynch off;
Context:    stream, http, server

Enables the SSL/TLS protocol asynchronous mode for connections to a proxied server.

Example

file: conf/nginx.conf

    http {
        server {
            location /ssl {
                proxy_pass https://127.0.0.1:8082/outer;
                proxy_ssl_asynch on;
            }
        }
    }

Directives

Syntax:     grpc_ssl_asynch on | off;
Default:    grpc_ssl_asynch off;
Context:    http, server

Enables the SSL/TLS protocol asynchronous mode for connections to a grpc server.

Example

file: conf/nginx.conf

    http {
        server {
            location /grpcs {
                grpc_pass https://127.0.0.1:8082/outer;
                grpc_ssl_asynch on;
            }
        }
    }

Asynch Mode for NGINX* provide new option asynch for listen directive.

Example

file: conf/nginx.conf

    http {
        server{ listen 443 asynch; }
    }

Support OpenSSL Cipher PIPELINE feature (Deitals information about the pipeline settings, please refer to OpenSSL Docs)

Directives

Syntax:     ssl_max_pipelines size;
Default:    ssl_max_pipelines 0;
Context:    server

Set MAX number of pipelines

Directives

Syntax:     ssl_split_send_fragment size;
Default:    ssl_split_send_fragment 0;
Context:    server

Set split size of sending fragment

Directives

Syntax:     ssl_max_send_fragment size;
Default:    ssl_max_send_fragment 0;
Context:    server

Set max number of sending fragment

White Paper: Intel® Quickassist Technology and OpenSSL-1.1.0:Performance

Limitations

Nginx supports reload operation, when QAT hardware is involved for crypto offload, user should ensure that there are enough number of QAT instances. For example, the available qat instance number should be 2x equal or more than Nginx worker process number.

For example, in Nginx configuration file (nginx.conf) worker process number is configured as
```
   worker_processes 16;
```
Then the instance configuration in QAT driver configuration file should be
```
    [SHIM]
    NumberCyInstances = 1
    NumberDcInstances = 0
    NumProcesses = 32
    LimitDevAccess = 0
```
When configure "worker_process auto", Asynch Mode for NGINX* will need instance number equal or larger than 2 times of CPU core number. Otherwise, Asynch Mode for NGINX* might show various issue caused by leak of instance.
Nginx supports QAT engine and QATzip module. By default, they use User Space DMA-able Memory (USDM) Component. The USDM component is located within the Upstream Intel® QAT Driver source code in the following subdirectory: quickassist/utilities/libusdm_drv. We should have this component enabled and assignd enough memory before using nginx_qat_module or nginx_qatzip_module, for example:
```
    echo 2048 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
    insmod ./usdm_drv.ko max_huge_pages=2048 max_huge_pages_per_process=32
```
AES-CBC-HMAC-SHA algorithm won't be offloaded to QAT_HW if Encrypt then MAC(ETM) mode is used for SSL connection(by default). Refer to QAT_Engine for more details.

QATzip module supports GZIP compression acceleration now, does not support user define dictionary compression yet.
The HTTP2 protocol does not support asynchronous functionality.

Installation Instructions

Asynch Mode for NGINX* Installation

Set the following environmental variables:

NGINX_INSTALL_DIR is the directory where Nginx will be installed to

OPENSSL_LIB is the directory where the OpenSSL has been installed to

QZ_ROOT is the directory where the QATzip has been compiled to

Configure nginx for compilation:

Configure Nginx against OpenSSL 3.0
```bash
./configure \
    --prefix=$NGINX_INSTALL_DIR \
    --with-http_ssl_module \
    --add-dynamic-module=modules/nginx_qatzip_module \
    --add-dynamic-module=modules/nginx_qat_module/ \
    --with-cc-opt="-DNGX_SECURE_MEM -I$OPENSSL_LIB/include -I$ICP_ROOT/quickassist/include -I$ICP_ROOT/quickassist/include/dc -I$QZ_ROOT/include -Wno-error=deprecated-declarations" \
    --with-ld-opt="-Wl,-rpath=$OPENSSL_LIB/lib64 -L$OPENSSL_LIB/lib64 -L$QZ_ROOT/src -lqatzip -lz"
```

Compile and Install:

    make
    make install

Nginx supports setting worker to non-root user, for example:

Add user qat in group qat, for example run below command in your terminal:
```bash
    groupadd qat
    useradd -g qat qat
```

In nginx.conf, you can set worker as qat, qat is the user you added before:
```bash
    user qat qat;
```

Then we need to give non-root worker enough permission to enable qat, you need to run folow
connamds in your terminal:
```bash
    chgrp qat /dev/qat_*
    chmod 660 /dev/qat_*
    chgrp qat /dev/usdm_drv
    chmod 660 /dev/usdm_drv
    chgrp qat /dev/uio*
    chmod 660 /dev/uio*
    chgrp qat /dev/hugepages
    chmod 770 /dev/hugepages
    chgrp qat /usr/local/lib/libqat_s.so
    chgrp qat /usr/local/lib/libusdm_drv_s.so
```

Build OpenSSL* and QAT engine

These instructions can be found on QAT engine

Build QATzip

These instructions can be found on QATzip

Run Nginx official test

These instructions can be found on Official test

Performance Testing Best Known Methodology

These instruction can be found on 9 9: https://github.com/intel/asynch_mode_nginx/blob/master/test/performance_bkm/README.md

SSL Engine Framework for Configuration

As QAT engine is implemented as a standard OpenSSL* engine, its behavior can be controlled from the OpenSSL* configuration file (openssl.conf), which can be found on QAT engine.

Note: From v0.3.2 and later, this kind of configuration in openssl.conf will not be effective for Nginx. Please use the following method to configure Nginx SSL engine, such as Intel® QAT.

An SSL Engine Framework is introduced to provide a more powerful and flexible mechanism to configure Nginx SSL engine directly in the Nginx configuration file (nginx.conf).

ssl_engine configuration

A new configuration block is introduced as ssl_engine which provides two general directives:

Sets the engine module and engine id for OpenSSL async engine. For example:

Syntax:     use_engine [engine module name] [engine id];
Default:    N/A
Context:    ssl_engine
Description:
            Specify the engine module name against engine id

Sets the engine module and engine id for OpenSSL async engine by only providing the engine id. The engine module should be the same as engine id in this case.

Syntax:     use_engine [engine id];
Default:    N/A
Context:    ssl_engine
Description:
            Specify the engine id

Syntax:     default_algorithms [ALL/RSA/EC/...];
Default:    ALL
Context:    ssl_engine
Description:
            Specify the algorithms need to be offloaded to the engine
            More details information please refer to OpenSSL engine

A following configuration sub-block can be used to set engine specific configuration. The name of the sub-block should have a prefix using the engine name specified in use_engine, such as [engine_name]_engine.

nginx_qat_module

Any 3rd party modules can be integrated into this framework. By default, a reference module dasync_module is provided in src/engine/modules and a QAT module nginx_qat_module is provided in modules/nginx_qat_modules.

An example configuration in the nginx.conf:

    load_module modules/ngx_ssl_engine_qat_module.so;
    ...
    ssl_engine {
        use_engine qatengine;
        default_algorithms RSA,EC,DH,PKEY_CRYPTO;
        qat_engine {
            qat_sw_fallback on;
            qat_offload_mode async;
            qat_notify_mode poll;
            qat_poll_mode heuristic;
            qat_shutting_down_release on;
        }
    }

For more details directives of nginx_qat_module, please refer to modules/nginx_qat_modules/README.

Support for Nginx Side Polling

The qat_module provides two kinds of Nginx side polling for QAT engine,

external polling mode
heuristic polling mode

Please refer to the README file in the modules/nginx_qat_modules directory to install this dynamic module.

Note: External polling and heuristic polling are unavailable in SSL proxy and stream module up to current release.

External Polling Mode

A timer-based polling is employed in each Nginx worker process to collect accelerator's response.

Directives in the qat_module

Syntax:     qat_external_poll_interval time;
Default:    1
Dependency: Valid if (qat_poll_mode=external)
Context:    qat_engine
Description:
            External polling time interval (ms)
            Valid value: 1 ~ 1000

Example file: conf/nginx.conf

    load_module modules/ngx_ssl_engine_qat_module.so;
    ...
    ssl_engine {
        use_engine qatengine;
        default_algorithms ALL;
        qat_engine {
            qat_offload_mode async;
            qat_notify_mode poll;

            qat_poll_mode external;
            qat_external_poll_interval 1;
        }
    }

Heuristic Polling Mode

This mode can be regarded as an improvement of the timer-based external polling. It is the recommended polling mode to communicate with QAT accelerators because of its performance advantages. With the knowledge of the offload traffic, it controls the response reaping rate to match the request submission rate so as to maximize system efficiency with moderate latency, and adapt well to diverse types of network traffics.

Note:

This mode is only available when using QAT engine v0.5.35 or later.
External polling timer is enabled by default when heuristic polling mode is enabled.

In the heuristic polling mode, a polling operation is only triggered at a proper moment:

Number of in-flight offload requests reaches a pre-defined threshold (in consideration of efficiency)
All the active SSL connections have submitted their cryptographic requests and been waiting for the corresponding responses (in consideration of timeliness).

Directives in the qat_module

Syntax:     qat_heuristic_poll_asym_threshold num;
Default:    48
Dependency: Valid if (qat_poll_mode=heuristic)
Context:    qat_engine
Description:
            Threshold of the number of in-flight requests to trigger a polling
            operation when there are in-flight asymmetric crypto requests
            Valid value: 1 ~ 512


Syntax:     qat_heuristic_poll_sym_threshold num;
Default:    24
Dependency: Valid if (qat_poll_mode=heuristic)
Context:    qat_engine
Description:
            Threshold of the number of in-flight requests to trigger a polling
            operation when there is no in-flight asymmetric crypto request
            Valid value: 1 ~ 512

Example file: conf/nginx.conf

    load_module modules/ngx_ssl_engine_qat_module.so;
    ...
    ssl_engine {
        use_engine qatengine;
        default_algorithms ALL;
        qat_engine {
            qat_offload_mode async;
            qat_notify_mode poll;

            qat_poll_mode heuristic;
            qat_heuristic_poll_asym_threshold 48;
            qat_heuristic_poll_sym_threshold 24;
        }
    }

QATzip Module Configuration

This module is developed to accelerate GZIP compression with QAT accelerators through QATzip stream API released in v0.2.6. Software fallback feature of QATzip is released in v1.0.0.

Note:

This mode is only available when using QATzip v1.0.0 or later.
This mode relys on gzip module for SW fallback feature.
The qatzip_sw is set to failover by default, do not load QATzip module if you do not want to enable qatzip. Or else it would be enabled and set to failover.

Directives in the qatzip_module

    Syntax:     qatzip_sw only/failover/no;
    Default:    qatzip_sw failover;
    Context:    http, server, location, if in location
    Description:
                only: qatzip is disable, using gzip;
                failover: qatzip is enable, qatzip sfotware fallback feature enable.
                no: qatzip is enable, qatzip sfotware fallback feature disable.

    Syntax:     qatzip_chunk_size size;
    Default:    qatzip_chunk_size 64k;
    Context:    http, server, location
    Description:
                Sets the chunk buffer size in which data will be compressed into
                one deflate block. By default, the buffer size is equal to 64K.

    Syntax:     qatzip_stream_size size;
    Default:    qatzip_stream_size 256k;
    Context:    http, server, location
    Description:
                Sets the size of stream buffers in which data will be compressed into
                multiple deflate blocks and only the last block has FINAL bit being set.
                By default, the stream buffer size is 256K.

Example file: conf/nginx.conf

    load_module modules/ngx_http_qatzip_filter_module.so;
    ...

    gzip_http_version   1.0;
    gzip_proxied any;
    qatzip_sw failover;
    qatzip_min_length 128;
    qatzip_comp_level 1;
    qatzip_buffers 16 8k;
    qatzip_types text/css text/javascript text/xml text/plain text/x-component application/javascript application/json application/xml application/rss+xml font/truetype font/opentype application/vnd.ms-fontobject image/svg+xml application/octet-stream image/jpeg;
    qatzip_chunk_size   64k;
    qatzip_stream_size  256k;
    qatzip_sw_threshold 256;

For more details directives of nginx_qatzip_module, please refer to modules/nginx_qatzip_modules/README.

QAT Sample Configuration

file: conf/nginx.QAT-sample.conf

This is a sample configure file shows how to configure QAT in nginx.conf. This file includes:

Enable SSL QAT engine in heretic mode.
Support HTTPS async mode.
Enable QATzip support.
Select TLS-1.2 as the default ssl_protocols.

Note:

The QAT configuration needs crypto and compression instance for the user space application.

Known Issues

'Orphan ring' errors in dmesg output when Nginx exit
Working with current QAT driver, Nginx workers exit with 'Orphan ring' errors. This issue has been fixed in future QAT driver release.

Cache manager/loader process will allocate QAT instance via QAT engine
According to current QAT engine design, child process forked by master process will initialize QAT engine automatically in QAT engine atfork hook function. If cache manager/loader processes are employed, QAT instances will be allocated in the same way as worker process. Cache manager/loader processes do not perform modules' exit process method in Nginx native design which will introduce "Orphan ring" error message in dmesg output.

Segment fault happens while sending HUP signal when QAT instances not enough
If the available qat instance number is less than 2x Nginx worker process number, segment fault happens while sending HUP signal to Asynch Mode for NGINX*. Using qat_sw_fallback on; in qat_engine directive as a workaround for this issue. And it needs special attention if the QAT instances are enough when setting worker_processes auto;.

Insufficient HW resources would cause segment fault while sending HUP signal
Before running nginx, please make sure you have arranged enough HW resources for nginx, including memory and hard disk space. Disk space exhausted or out of memory would cause core dump when nginx receives HUP signal during handshake phase.

Performance drop under OpenSSL 3.0

Both ECDH and PRF cause performance drop under OpenSSL 3.0.
Due to changes in the OpenSSL 3.0 framework, TLS handshake performance is significantly degraded. See this issue for details.

The 0-RTT (early data) issue
The 0-RTT (early data) feature does not support async mode in current asynch_mode_nginx, so it's not recommended to use async offload to QAT hardware during early data process.

CHACHA-POLY and AES-GCM throughput performance issue
With the bottleneck of memory allocation, the throughput of CHACHA-Poly and AES-GCM can not reach the peak value when running with 4 or more QAT devices.

Intended Audience

The target audience may be software developers, test and validation engineers, system integrators, end users and consumers for Asynch Mode for NGINX* integrated Intel® Quick Assist Technology.

Legal

Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

This document contains information on products, services and/or processes in development. All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest forecast , schedule, specifications and roadmaps.

The products and services described may contain defects or errors known as errata which may cause deviations from published specifications. Current characterized errata are available on request.

Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting www.intel.com/design/literature.htm.

Intel, the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Table of Contents

Introduction

Licensing

Features

Hardware Requirements

Software Requirements

Additional Information

Limitations

Installation Instructions

Asynch Mode for NGINX* Installation

Build OpenSSL* and QAT engine

Build QATzip

Run Nginx official test

Performance Testing Best Known Methodology

SSL Engine Framework for Configuration

ssl_engine configuration

nginx_qat_module

Support for Nginx Side Polling

External Polling Mode

Heuristic Polling Mode

QATzip Module Configuration

QAT Sample Configuration

Known Issues

Intended Audience

Legal

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 136 Commits
.github		.github
auto		auto
conf		conf
contrib		contrib
docs		docs
modules		modules
src		src
test		test
LICENSE		LICENSE
README.md		README.md
config.example		config.example
configure		configure

License

dongbinghua/asynch_mode_nginx

Folders and files

Latest commit

History

Repository files navigation

Table of Contents

Introduction

Licensing

Features

Hardware Requirements

Software Requirements

Additional Information

Limitations

Installation Instructions

Asynch Mode for NGINX* Installation

Build OpenSSL* and QAT engine

Build QATzip

Run Nginx official test

Performance Testing Best Known Methodology

SSL Engine Framework for Configuration

ssl_engine configuration

nginx_qat_module

Support for Nginx Side Polling

External Polling Mode

Heuristic Polling Mode

QATzip Module Configuration

QAT Sample Configuration

Known Issues

Intended Audience

Legal

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages