Paradox Ethernet - USB Interface , Transfers Serial On board port to Ethernet Telnet Session or USB connection Paradox Alarm Panels (SP and EVO series) uses on board Serial port for Interfacing IP Modules(IP150) , USB converters for Local Programming or other staff. This device forwards Alarm serial data to a Ethernet/IP/Telnet Session. Furthermore integrates a USB to Serial Adapter. In other Words 307USB and IP150 combined in a single low cost design based on Arduino Mega 2560.
- USB Connection to Panel (usb to serial implemented on Paradox Interface) similar function to 307USB.Requires 120-Ohm Resistor between Reset and 5V.
- DHCP functionality and OLED display to inform IP address and Serial Settings.
- Static IP addressing is recommended.
- Up to 3 multiple Connection.
- Telnet to Port 24 to show device CLI and perform configuration.
- Device Transfers Paradox Serial Data to Telnet Port 23.
- Settings stored to internal EEPROM.
- Serial Baud rate is configurable to support SP and EVO series Panels.
- OLED Display for convenient use , as informs for device IP address and Serial Port Settings.
- DC-DC down converter is optional but recommended to avoid over heating Arduino Board regulator.
- 3D-Print case has been designed to accommodate device.
- Paradox SP5500
- Paradox SP65
- Paradox SP4000
- Paradox EVOHD