Primarily, this is meant to be a set of libraries to connect to vector via BLE. It just so happens that there's also a CLI that utilizes them built in.
- You'll need to install libsodium for your OS. Specific instructions vary by OS
To build the binary, run
$ make build
You'll have to do something like this on the built binary
$ sudo setcap 'cap_net_raw,cap_net_admin+eip' /path/to/fileCompletely untested, but let me know!
Currently unavailable in Windows- there are no Go wrappers for Bluetooth in Windows due to the way Bluetooth is handled by Windows, hence why this is not implemented yet.
There are more features in the library than are currently available in the CLI, but here's whats currently available
| Name | Description |
|---|---|
| scan | runs a BLE scan and displays an appropriate list of devices |
| connect | connect to a vector via ID (displayed in the scan) |
| authorize | performs a cloud authorization (but you'll need to find your token- via SSH in your robot, do "cat /data/data/com.anki.victor/persistent/token/token.jwt") |
| configure | allows you to make/change configuration |
| get-status | displays the status of your vector |
| wifi-scan | scan for a list of available wifi networks |
| wifi-connect | connect to a wifi network |
| wifi-forget | tell vector to forget a wifi network |
| wifi-ip | display IP information of the robot |
| ota-start | perform an OTA code download |
| ota-cancel | stops an in-progress OTA download |
| logs | download logs from your robot |
| Name | Description |
|---|---|
| Timezone | Input a valid timezone. A handy list of timezone options are listed under the "TZ Database Name" column on Wikipedia |
| Default Location | Input a valid location. Format is /<State (if applicable)>/ |
| Locale | Determines wake word ("Hey Vector") accent detection. Available options are listed in the list_locales file. |
| Data Analytics | Set to "true" to allow Vector to upload crash logs and other non-personal logs to DDL. Note: This data is not sold or released to any third party. |
| Distance Units | Set to "true" to measure distance in metric units. Set to "false" to measure distance in imperial units. |
| Temperature Units | Set to "true" to measure temperature in metric units. Set to "false" to measure distance in imperial units. |
This is an early release, and not all features are implemented in either the CLI or in the library itself.