migrate lsp docs to manual and update for v2 registry completions

language_server.md

@@ -0,0 +1,14 @@
+# The Language Server
+
+The Deno CLI comes with a built in language server that can provide an
+intelligent editing experience as well as a way to easily access the other tools
+that come built in with Deno. For most users, using the language server would be
+via your editor like [Visual Studio Code](./vscode_deno.md) or
+[other editors](./getting_started/setup_your_environment.md). This section of
+the manual is designed for those creating integrations to the language server or
+providing a package registry for Deno that integrates intelligently.
+
+In this section we will cover:
+
+- [An overview of the language server](./language_server/overview.md)
+- [Import completions and intelligent package registries](./language_server/imports.md)

language_server/imports.md

@@ -0,0 +1,342 @@
+## Import completions and intelligent registries
+
+The language server, supports completions for URLs.
+
+### Local import completions
+
+When attempting to import a relative module specifier (one that starts with `./`
+or `../`), import completions are provided for directories and files that Deno
+thinks it can run (ending with the extensions `.ts`, `.js`, `.tsx`, `.jsx`, or
+`.mjs`).
+
+### Workspace import completions
+
+When attempting to import a remote URL that isn't configured as a registry (see
+below), the extension will provide remote modules that are already part of the
+workspace.
+
+### Module registry completions
+
+Module registries that support it can be configured for auto completion. This
+provides a handy way to explore a module registry from the "comfort" of your
+IDE.
+
+#### Auto-discovery
+
+The Deno language server, by default, will attempt to determine if a server
+supports completion suggestions. If the host/origin has not been explicitly
+configured, it will check the server, and if it supports completion suggestions
+you will be prompted to choose to enable it or not.
+
+You should only enable this for registries you trust, as the remote server could
+provide suggestions for modules which are an attempt to get you to run
+un-trusted code.
+
+#### Configuration
+
+Settings for configuring registries for auto completions:
+
+- `deno.suggest.imports.autoDiscover` - If enabled, when the language server
+  discovers a new origin that isn't explicitly configured, it will check to see
+  if that origin supports import completions and prompt you to enable it or not.
+  This is `true` by default.
+- `deno.suggest.imports.hosts` - These are the _origins_ that are configured to
+  provide import completions. The target host needs to support Deno import
+  completions (detailed below). The value is an object where the key is the host
+  and the value is if it is enabled or not. For example:
+
+  ```json
+  {
+    "deno.suggest.imports.hosts": {
+      "https://deno.land": true
+    }
+  }
+  ```
+
+#### How does it work?
+
+On startup of the extension and language server, Deno will attempt to fetch
+`/.well-known/deno-import-intellisense.json` from any of the hosts that are
+configured and enabled. This file provides the data necessary to form auto
+completion of module specifiers in a highly configurable way (meaning you aren't
+tied into any particular module registry in order to get a rich editor
+experience).
+
+As you build or edit your module specifier, Deno will go and fetch additional
+parts of the URL from the host based on what is configured in the JSON
+configuration file.
+
+When you complete the module specifier, if it isn't already cached locally for
+you, Deno will attempt to fetch the completed specifier from the registry.
+
+#### Does it work with all remote modules?
+
+No, as the extension and Deno need to understand how to _find_ modules. The
+configuration file provides a highly flexible way to allow people to describe
+how to build up a URL, including supporting things like semantic versioning if
+the module registry supports it.
+
+### Registry support for import completions
+
+In order to support having a registry be discoverable by the Deno language
+server, the registry needs to provide a few things:
+
+- A schema definition file. This file needs to be located at
+  `/.well-known/deno-import-intellisense.json`. This file provides the
+  configuration needed to allow the Deno language server _query_ the registry
+  and construct import specifiers.
+- A series of API endpoints that provide the values to be provided to the user
+  to complete an import specifier.
+
+#### Configuration schema
+
+The JSON response to the schema definition needs to be an object with two
+required properties:
+
+- `"version"` - a number, which must be equal to `1` or `2`.
+- `"registries"` - an array of registry objects which define how the module
+  specifiers are constructed for this registry.
+
+[There is a JSON Schema document which defines this
+schema available as part of the CLI's source code.](https://deno.land/x/deno/cli/schemas/registry-completions.v2.json)
+
+While the v2 supports more features than v1 did, they were introduced in a
+non-breaking way, and the language server automatically handles v1 or v2
+versions, irrespective of what version is supplied in the `"version"` key, so
+technically a registry could profess itself to be v1 but use all the v2
+features. This is not recommended though, because while there is no specific
+branches in code to support the v2 features currently, that doesn't mean there
+will not be in the future in order to support a _v3_ or whatever.
+
+#### Registries
+
+In the configuration schema, the `"registries"` property is an array of
+registries, which are objects which contain two required properties:
+
+- `"schema"` - a string, which is an Express-like path matching expression,
+  which defines how URLs are built on the registry. The syntax is directly based
+  on [path-to-regexp](https://github.com/pillarjs/path-to-regexp). For example,
+  if the following was the specifier for a URL on the registry:
+
+  ```
+  https://example.com/[email protected]/mod.ts
+  ```
+
+  The schema value might be something like this:
+
+  ```json
+  {
+    "version": 1,
+    "registries": [
+      {
+        "schema": "/:package([a-z0-9_]*)@:version?/:path*"
+      }
+    ]
+  }
+  ```
+
+- `"variables"` - for the keys defined in the schema, a corresponding variable
+  needs to be defined, which informs the language server where to fetch
+  completions for that part of the module specifier. In the example above, we
+  had 3 variables of `package`, `version` and `path`, so we would expect a
+  variable definition for each.
+
+#### Variables
+
+In the configuration schema, the `"variables"` property is an array of variable
+definitions, which are objects with two required properties:
+
+- `"key"` - a string which matches the variable key name specifier in the
+  `"schema"` property.
+- `"documentation"` - An optional URL where the language server can fetch the
+  documentation for an individual variable entry. Variables can be substituted
+  in to build the final URL. Variables with a single brace format like
+  `${variable}` will be added as matched out of the string, and those with
+  double format like `${{variable}}` will be percent-encoded as a URI component
+  part.
+- `"url"` - A URL where the language server can fetch the completions for the
+  variable. Variables can be substituted in to build the URL. Variables with a
+  single brace format like `${variable}` will be added as matched out of the
+  string, and those with double format like `${{variable}}` will be
+  percent-encoded as a URI component part. If the variable the value of the
+  `"key"` is included, then the language server will support incremental
+  requests for partial modules, allowing the server to provide completions as a
+  user types part of the variable value. If the URL is not fully qualified, the
+  URL of the schema file will be used as a base. In our example above, we had
+  three variables and so our variable definition might look like:
+
+  ```json
+  {
+    "version": 1,
+    "registries": [
+      {
+        "schema": "/:package([a-z0-9_]*)@:version?/:path*",
+        "variables": [
+          {
+            "key": "package",
+            "documentation": "https://api.example.com/docs/packages/${package}",
+            "url": "https://api.example.com/packages/${package}"
+          },
+          {
+            "key": "version",
+            "url": "https://api.example.com/packages/${package}/versions"
+          },
+          {
+            "key": "path",
+            "documentation": "https://api.example.com/docs/packages/${package}/${{version}}/paths/${path}",
+            "url": "https://api.example.com/packages/${package}/${{version}}/paths/${path}"
+          }
+        ]
+      }
+    ]
+  }
+  ```
+
+##### URL endpoints
+
+The response from each URL endpoint needs to be a JSON document that is an array
+of strings or a _completions list_:
+
+```typescript
+interface CompletionList {
+  /** The list (or partial list) of completion items. */
+  items: string[];
+  /** If the list is a partial list, and further queries to the endpoint will
+   * change the items, set `isIncomplete` to `true`. */
+  isIncomplete?: boolean;
+  /** If one of the items in the list should be preselected (the default
+   * suggestion), then set the value of `preselect` to the value of the item. */
+  preselect?: string;
+}
+```
+
+Extending our example from above the URL `https://api.example.com/packages`
+would be expected to return something like:
+
+```json
+[
+  "a_package",
+  "another_package",
+  "my_awesome_package"
+]
+```
+
+Or something like this:
+
+```json
+{
+  "items": [
+    "a_package",
+    "another_package",
+    "my_awesome_package"
+  ],
+  "isIncomplete": false,
+  "preselect": "a_package"
+}
+```
+
+And a query to `https://api.example.com/packages/a_package/versions` would
+return something like:
+
+```json
+[
+  "v1.0.0",
+  "v1.0.1",
+  "v1.1.0",
+  "v2.0.0"
+]
+```
+
+Or:
+
+```json
+{
+  "items": [
+    "v1.0.0",
+    "v1.0.1",
+    "v1.1.0",
+    "v2.0.0"
+  ],
+  "preselect": "v2.0.0"
+}
+```
+
+And a query to
+`https://api.example.com/packages/a_package/versions/v1.0.0/paths` would return
+something like:
+
+```json
+[
+  "a.ts",
+  "b/c.js",
+  "d/e.ts"
+]
+```
+
+Or:
+
+```json
+{
+  "items": [
+    "a.ts",
+    "b/c.js",
+    "d/e.ts"
+  ],
+  "isIncomplete": true,
+  "preselect": "a.ts"
+}
+```
+
+##### Documentation endpoints
+
+Documentation endpoints should return a documentation object with any
+documentation related to the requested entity:
+
+```typescript
+interface Documentation {
+  kind: "markdown" | "plaintext";
+  value: string;
+}
+```
+
+For extending the example from above, a query to
+`https://api.example.com/packages/a_package` would return something like:
+
+```json
+{
+  "kind": "markdown",
+  "value": "some _markdown_ `documentation` here..."
+}
+```
+
+#### Schema validation
+
+When the language server is started up (or the configuration for the extension
+is changed) the language server will attempt to fetch and validate the schema
+configuration for the domain hosts specifier in the configuration.
+
+The validation attempts to make sure that all registries defined are valid, that
+the variables contained in those schemas are specified in the variables, and
+that there aren't extra variables defined that are not included in the schema.
+If the validation fails, the registry won't be enabled and the errors will be
+logged to the Deno Language Server output in vscode.
+
+If you are a registry maintainer and need help, advice, or assistance in setting
+up your registry for auto-completions, feel free to open up an
+[issue](https://github.com/denoland/deno/issues/new?labels=lsp&title=lsp%3A%20registry%20configuration)
+and we will try to help.
+
+### Known registries
+
+The following is a list of registries known to support the scheme. All you need
+to do is add the domain to `deno.suggest.imports.hosts` and set the value to
+`true`:
+
+- `https://deno.land/` - both the 3rd party `/x/` registry and the `/std/`
+  library registry are available.
+- `https://nest.land/` - a module registry for Deno on the blockweave.
+- `https://crux.land/` - a free open-source registry for permanently hosting
+  small scripts.
+
+```
+```