DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

pzakha · 2021-02-04T23:39:20Z

This disables this kind of messages that flood the logs when an iscsi initiator tries to access an iscsi target that doesn't exist on the server:

kernel: [741363.397732] Unable to locate Target IQN: iqn.2008-07.com.delphix:02:44739d0c-a359-6ad9-a11e-f7d9bc1f7b32 in Storage Node
kernel: [741363.401405] iSCSI Login negotiation failed.

This is usually the result of an iscsi initiator that was previously configured with a different server with the same IP, or with the same server that underwent factory reset.

PRs for other flavors

delphix/linux-kernel-aws#2
delphix/linux-kernel-azure#2
delphix/linux-kernel-gcp#2
delphix/linux-kernel-oracle#2

Testing

ab-pre-push: http://selfservice.jenkins.delphix.com/job/devops-gate/job/master/job/appliance-build-orchestrator-pre-push/4700
Tested by adding an iscsi initiator to the DE (from Delphix's perspective, a "Windows Target Environment"), then running developer reset on the DE. Messages don't appear in the logs anymore, but can be re-enabled dynamically by running:
```
sudo bash -c "echo 'file iscsi_target_login.c line 1180 +p' > /sys/kernel/debug/dynamic_debug/control"
sudo bash -c "echo 'file iscsi_target_nego.c line 1169 +p' > /sys/kernel/debug/dynamic_debug/control"
```

…messages

sebroy · 2021-02-09T14:21:27Z

drivers/target/iscsi/iscsi_target_login.c

@@ -1177,7 +1177,7 @@ void iscsi_target_login_sess_out(struct iscsi_conn *conn,
 	if (!new_sess)
 		goto old_sess_out;

-	pr_err("iSCSI Login negotiation failed.\n");
+	pr_debug("iSCSI Login negotiation failed.\n");
 	iscsit_collect_login_stats(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,


This is interesting, where are these stats collected? Are these exposed through /proc somewhere?

Good question, I haven't looked into it, but now I'm curious too.

… runtime suspended BugLink: https://bugs.launchpad.net/bugs/1906851 Similar to commit 165ae7a ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Cc: <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Acked-by: Sasha Neftin <[email protected]> (cherry picked from commit 0636cd13c6e5e025c95374a78b68c6dc86693fb4 git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue.git dev-queue) Signed-off-by: Kai-Heng Feng <[email protected]> Acked-by: Stefan Bader <[email protected]> Acked-by: Kleber Sacilotto de Souza <[email protected]> Signed-off-by: Ian May <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1908562 [ Upstream commit e773ca7 ] Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Ian May <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1910816 commit 190113b upstream. Prarit reported that depending on the affinity setting the ' irq $N: Affinity broken due to vector space exhaustion.' message is showing up in dmesg, but the vector space on the CPUs in the affinity mask is definitely not exhausted. Shung-Hsi provided traces and analysis which pinpoints the problem: The ordering of trying to assign an interrupt vector in assign_irq_vector_any_locked() is simply wrong if the interrupt data has a valid node assigned. It does: 1) Try the intersection of affinity mask and node mask 2) Try the node mask 3) Try the full affinity mask 4) Try the full online mask Obviously #2 and #3 are in the wrong order as the requested affinity mask has to take precedence. In the observed cases #1 failed because the affinity mask did not contain CPUs from node 0. That made it allocate a vector from node 0, thereby breaking affinity and emitting the misleading message. Revert the order of #2 and #3 so the full affinity mask without the node intersection is tried before actually affinity is broken. If no node is assigned then only the full affinity mask and if that fails the full online mask is tried. Fixes: d6ffc6a ("x86/vector: Respect affinity mask in irq descriptor") Reported-by: Prarit Bhargava <[email protected]> Reported-by: Shung-Hsi Yu <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Shung-Hsi Yu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1910816 commit e91d8d7 upstream. While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/[email protected] Fixes: e47110e ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by: Minchan Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Harish Sriram <[email protected]> Cc: Uladzislau Rezki <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

…d ops BugLink: https://bugs.launchpad.net/bugs/1910822 [ Upstream commit 52719fc ] There are three ways pseries_suspend_begin() can be reached: 1. When "mem" is written to /sys/power/state: kobj_attr_store() -> state_store() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This never works because there is no way to supply a valid stream id using this interface, and H_VASI_STATE is called with a stream id of zero. So this call path is useless at best. 2. When a stream id is written to /sys/devices/system/power/hibernate. pseries_suspend_begin() is polled directly from store_hibernate() until the stream is in the "Suspending" state (i.e. the platform is ready for the OS to suspend execution): dev_attr_store() -> store_hibernate() -> pseries_suspend_begin() 3. When a stream id is written to /sys/devices/system/power/hibernate (continued). After #2, pseries_suspend_begin() is called once again from the pm core: dev_attr_store() -> store_hibernate() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This is redundant because the VASI suspend state is already known to be Suspending. The begin() callback of platform_suspend_ops is optional, so we can simply remove that assignment with no loss of function. Fixes: 32d8ad4 ("powerpc/pseries: Partition hibernation support") Signed-off-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1910822 [ Upstream commit 4a9d81c ] If the elem is deleted during be iterated on it, the iteration process will fall into an endless loop. kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137] PID: 17137 TASK: ffff8818d93c0000 CPU: 4 COMMAND: "nfsd" [exception RIP: __state_in_grace+76] RIP: ffffffffc00e817c RSP: ffff8818d3aefc98 RFLAGS: 00000246 RAX: ffff881dc0c38298 RBX: ffffffff81b03580 RCX: ffff881dc02c9f50 RDX: ffff881e3fce8500 RSI: 0000000000000001 RDI: ffffffff81b03580 RBP: ffff8818d3aefca0 R8: 0000000000000020 R9: ffff8818d3aefd40 R10: ffff88017fc03800 R11: ffff8818e83933c0 R12: ffff8818d3aefd40 R13: 0000000000000000 R14: ffff8818e8391068 R15: ffff8818fa6e4000 CS: 0010 SS: 0018 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace] #1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd] #2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd] #3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd] #4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd] #5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc] #6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc] #7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd] #8 [ffff8818d3aefec8] kthread at ffffffff810b88c1 #9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607 The troublemake elem: crash> lock_manager ffff881dc0c38298 struct lock_manager { list = { next = 0xffff881dc0c38298, prev = 0xffff881dc0c38298 }, block_opens = false } Fixes: c87fb4a ("lockd: NLM grace period shouldn't block NFSv4 opens") Signed-off-by: Cheng Lin <[email protected]> Signed-off-by: Yi Wang <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1915186 [ Upstream commit b774134 ] The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028 ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy <[email protected]> Signed-off-by: Hoang Le <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: William Breathitt Gray <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1915195 commit fb28610 upstream. While testing the error paths of relocation I hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc6+ #217 Not tainted ------------------------------------------------------ mount/779 is trying to acquire lock: ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340 but task is already holding lock: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-root-00){++++}-{3:3}: down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x27/0x100 btrfs_read_lock_root_node+0x31/0x40 btrfs_search_slot+0x462/0x8f0 btrfs_update_root+0x55/0x2b0 btrfs_drop_snapshot+0x398/0x750 clean_dirty_subvols+0xdf/0x120 btrfs_recover_relocation+0x534/0x5a0 btrfs_start_pre_rw_mount+0xcb/0x170 open_ctree+0x151f/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (sb_internal#2){.+.+}-{0:0}: start_transaction+0x444/0x700 insert_balance_item.isra.0+0x37/0x320 btrfs_balance+0x354/0xf40 btrfs_ioctl_balance+0x2cf/0x380 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}: __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 __mutex_lock+0x7e/0x7b0 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(sb_internal#2); lock(btrfs-root-00); lock(&fs_info->balance_mutex); *** DEADLOCK *** 2 locks held by mount/779: #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380 #1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 stack backtrace: CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ #217 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 ? trace_call_bpf+0x139/0x260 __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 ? btrfs_recover_balance+0x2f0/0x340 __mutex_lock+0x7e/0x7b0 ? btrfs_recover_balance+0x2f0/0x340 ? btrfs_recover_balance+0x2f0/0x340 ? rcu_read_lock_sched_held+0x3f/0x80 ? kmem_cache_alloc_trace+0x2c4/0x2f0 ? btrfs_get_64+0x5e/0x100 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea ? rcu_read_lock_sched_held+0x3f/0x80 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? __kmalloc_track_caller+0x2f2/0x320 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 ? capable+0x3a/0x60 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is straightforward to fix, simply release the path before we setup the balance_ctl. CC: [email protected] # 4.4+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: William Breathitt Gray <[email protected]>

…messages (delphix#2)

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/1916061 commit b25b0b8 upstream. With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: ethanwu <[email protected]> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918167 [ Upstream commit 3f618ab ] When building with KASAN and LKDTM, clang may implictly generate an asan.module_ctor function in the LKDTM rodata object. The Makefile moves the lkdtm_rodata_do_nothing() function into .rodata by renaming the file's .text section to .rodata, and consequently also moves the ctor function into .rodata, leading to a boot time crash (splat below) when the ctor is invoked by do_ctors(). Let's prevent this by marking the function as noinstr rather than notrace, and renaming the file's .noinstr.text to .rodata. Marking the function as noinstr will prevent tracing and kprobes, and will inhibit any undesireable compiler instrumentation. The ctor function (if any) will be placed in .text and will work correctly. Example splat before this patch is applied: [ 0.916359] Unable to handle kernel execute from non-executable memory at virtual address ffffa0006b60f5ac [ 0.922088] Mem abort info: [ 0.922828] ESR = 0x8600000e [ 0.923635] EC = 0x21: IABT (current EL), IL = 32 bits [ 0.925036] SET = 0, FnV = 0 [ 0.925838] EA = 0, S1PTW = 0 [ 0.926714] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000427b3000 [ 0.928489] [ffffa0006b60f5ac] pgd=000000023ffff003, p4d=000000023ffff003, pud=000000023fffe003, pmd=0068000042000f01 [ 0.931330] Internal error: Oops: 8600000e [#1] PREEMPT SMP [ 0.932806] Modules linked in: [ 0.933617] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7 #2 [ 0.935620] Hardware name: linux,dummy-virt (DT) [ 0.936924] pstate: 40400005 (nZcv daif +PAN -UAO -TCO BTYPE=--) [ 0.938609] pc : asan.module_ctor+0x0/0x14 [ 0.939759] lr : do_basic_setup+0x4c/0x70 [ 0.940889] sp : ffff27b600177e30 [ 0.941815] x29: ffff27b600177e30 x28: 0000000000000000 [ 0.943306] x27: 0000000000000000 x26: 0000000000000000 [ 0.944803] x25: 0000000000000000 x24: 0000000000000000 [ 0.946289] x23: 0000000000000001 x22: 0000000000000000 [ 0.947777] x21: ffffa0006bf4a890 x20: ffffa0006befb6c0 [ 0.949271] x19: ffffa0006bef9358 x18: 0000000000000068 [ 0.950756] x17: fffffffffffffff8 x16: 0000000000000000 [ 0.952246] x15: 0000000000000000 x14: 0000000000000000 [ 0.953734] x13: 00000000838a16d5 x12: 0000000000000001 [ 0.955223] x11: ffff94000da74041 x10: dfffa00000000000 [ 0.956715] x9 : 0000000000000000 x8 : ffffa0006b60f5ac [ 0.958199] x7 : f9f9f9f9f9f9f9f9 x6 : 000000000000003f [ 0.959683] x5 : 0000000000000040 x4 : 0000000000000000 [ 0.961178] x3 : ffffa0006bdc15a0 x2 : 0000000000000005 [ 0.962662] x1 : 00000000000000f9 x0 : ffffa0006bef9350 [ 0.964155] Call trace: [ 0.964844] asan.module_ctor+0x0/0x14 [ 0.965895] kernel_init_freeable+0x158/0x198 [ 0.967115] kernel_init+0x14/0x19c [ 0.968104] ret_from_fork+0x10/0x30 [ 0.969110] Code: 00000003 00000000 00000000 00000000 (00000000) [ 0.970815] ---[ end trace b5339784e20d015c ]--- Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Kees Cook <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit eaba3b2 ] Unprivileged user can crash kernel by using DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC ioctl. This was reported by trinity[1] fuzzer. [ 71.073906] nouveau 0000:01:00.0: crashme[1329]: channel failed to initialise, -17 [ 71.081730] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 71.088928] #PF: supervisor read access in kernel mode [ 71.094059] #PF: error_code(0x0000) - not-present page [ 71.099189] PGD 119590067 P4D 119590067 PUD 1054f5067 PMD 0 [ 71.104842] Oops: 0000 [#1] SMP NOPTI [ 71.108498] CPU: 2 PID: 1329 Comm: crashme Not tainted 5.8.0-rc6+ #2 [ 71.114993] Hardware name: AMD Pike/Pike, BIOS RPK1506A 09/03/2014 [ 71.121213] RIP: 0010:nouveau_abi16_ioctl_channel_alloc+0x108/0x380 [nouveau] [ 71.128339] Code: 48 89 9d f0 00 00 00 41 8b 4c 24 04 41 8b 14 24 45 31 c0 4c 8d 4b 10 48 89 ee 4c 89 f7 e8 10 11 00 00 85 c0 75 78 48 8b 43 10 <8b> 90 a0 00 00 00 41 89 54 24 08 80 7d 3d 05 0f 86 bb 01 00 00 41 [ 71.147074] RSP: 0018:ffffb4a1809cfd38 EFLAGS: 00010246 [ 71.152526] RAX: 0000000000000000 RBX: ffff98cedbaa1d20 RCX: 00000000000003bf [ 71.159651] RDX: 00000000000003be RSI: 0000000000000000 RDI: 0000000000030160 [ 71.166774] RBP: ffff98cee776de00 R08: ffffdc0144198a08 R09: ffff98ceeefd4000 [ 71.173901] R10: ffff98cee7e81780 R11: 0000000000000001 R12: ffffb4a1809cfe08 [ 71.181214] R13: ffff98cee776d000 R14: ffff98cec519e000 R15: ffff98cee776def0 [ 71.188339] FS: 00007fd926250500(0000) GS:ffff98ceeac80000(0000) knlGS:0000000000000000 [ 71.196418] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.202155] CR2: 00000000000000a0 CR3: 0000000106622000 CR4: 00000000000406e0 [ 71.209297] Call Trace: [ 71.211777] ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau] [ 71.218053] drm_ioctl_kernel+0xac/0xf0 [drm] [ 71.222421] drm_ioctl+0x211/0x3c0 [drm] [ 71.226379] ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau] [ 71.232500] nouveau_drm_ioctl+0x57/0xb0 [nouveau] [ 71.237285] ksys_ioctl+0x86/0xc0 [ 71.240595] __x64_sys_ioctl+0x16/0x20 [ 71.244340] do_syscall_64+0x4c/0x90 [ 71.248110] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 71.253162] RIP: 0033:0x7fd925d4b88b [ 71.256731] Code: Bad RIP value. [ 71.259955] RSP: 002b:00007ffc743592d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 71.267514] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd925d4b88b [ 71.274637] RDX: 0000000000601080 RSI: 00000000c0586442 RDI: 0000000000000003 [ 71.281986] RBP: 00007ffc74359340 R08: 00007fd926016ce0 R09: 00007fd926016ce0 [ 71.289111] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000400620 [ 71.296235] R13: 00007ffc74359420 R14: 0000000000000000 R15: 0000000000000000 [ 71.303361] Modules linked in: rfkill sunrpc snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep kvm_amd snd_seq ccp snd_seq_device snd_pcm kvm snd_timer snd irqbypass soundcore sp5100_tco pcspkr crct10dif_pclmul crc32_pclmul ghash_clmulni_intel wmi_bmof joydev i2c_piix4 fam15h_power k10temp acpi_cpufreq ip_tables xfs libcrc32c sd_mod t10_pi sg nouveau video mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm broadcom bcm_phy_lib ata_generic ahci drm e1000 crc32c_intel libahci serio_raw tg3 libata firewire_ohci firewire_core wmi crc_itu_t dm_mirror dm_region_hash dm_log dm_mod [ 71.365269] CR2: 00000000000000a0 simplified reproducer ---------------------------------8<---------------------------------------- /* * gcc -o crashme crashme.c * ./crashme /dev/dri/renderD128 */ struct drm_nouveau_channel_alloc { uint32_t fb_ctxdma_handle; uint32_t tt_ctxdma_handle; int channel; uint32_t pushbuf_domains; /* Notifier memory */ uint32_t notifier_handle; /* DRM-enforced subchannel assignments */ struct { uint32_t handle; uint32_t grclass; } subchan[8]; uint32_t nr_subchan; }; static struct drm_nouveau_channel_alloc channel; int main(int argc, char *argv[]) { int fd; int rv; if (argc != 2) die("usage: %s <dev>", 0, argv[0]); if ((fd = open(argv[1], O_RDONLY)) == -1) die("open %s", errno, argv[1]); if (ioctl(fd, DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC, &channel) == -1 && errno == EACCES) die("ioctl %s", errno, argv[1]); close(fd); printf("PASS\n"); return 0; } ---------------------------------8<---------------------------------------- [1] https://github.com/kernelslacker/trinity Fixes: eeaf06a ("drm/nouveau/svm: initial support for shared virtual memory") Signed-off-by: Frantisek Hrbata <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit 661f385 ] During connection setup, the application may choose to zero-size inbound and outbound READ queues, as well as the Receive queue. This patch fixes handling of zero-sized queues, but not prevents it. Kamal Heib says in an initial error report: When running the blktests over siw the following shift-out-of-bounds is reported, this is happening because the passed IRD or ORD from the ulp could be zero which will lead to unexpected behavior when calling roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD. UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x99/0xcb ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3 ? down_write+0x183/0x3d0 siw_qp_modify.cold.8+0x2d/0x32 [siw] ? __local_bh_enable_ip+0xa5/0xf0 siw_accept+0x906/0x1b60 [siw] ? xa_load+0x147/0x1f0 ? siw_connect+0x17a0/0x17a0 [siw] ? lock_downgrade+0x700/0x700 ? siw_get_base_qp+0x1c2/0x340 [siw] ? _raw_spin_unlock_irqrestore+0x39/0x40 iw_cm_accept+0x1f4/0x430 [iw_cm] rdma_accept+0x3fa/0xb10 [rdma_cm] ? check_flush_dependency+0x410/0x410 ? cma_rep_recv+0x570/0x570 [rdma_cm] nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma] ? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma] ? lock_release+0x56e/0xcc0 ? lock_downgrade+0x700/0x700 ? lock_downgrade+0x700/0x700 ? __xa_alloc_cyclic+0xef/0x350 ? __xa_alloc+0x2d0/0x2d0 ? rdma_restrack_add+0xbe/0x2c0 [ib_core] ? __ww_mutex_die+0x190/0x190 cma_cm_event_handler+0xf2/0x500 [rdma_cm] iw_conn_req_handler+0x910/0xcb0 [rdma_cm] ? _raw_spin_unlock_irqrestore+0x39/0x40 ? trace_hardirqs_on+0x1c/0x150 ? cma_ib_handler+0x8a0/0x8a0 [rdma_cm] ? __kasan_kmalloc.constprop.7+0xc1/0xd0 cm_work_handler+0x121c/0x17a0 [iw_cm] ? iw_cm_reject+0x190/0x190 [iw_cm] ? trace_hardirqs_on+0x1c/0x150 process_one_work+0x8fb/0x16c0 ? pwq_dec_nr_in_flight+0x320/0x320 worker_thread+0x87/0xb40 ? __kthread_parkme+0xd1/0x1a0 ? process_one_work+0x16c0/0x16c0 kthread+0x35f/0x430 ? kthread_mod_delayed_work+0x180/0x180 ret_from_fork+0x22/0x30 Fixes: a531975 ("rdma/siw: main include file") Fixes: f29dd55 ("rdma/siw: queue pair methods") Fixes: 8b6a361 ("rdma/siw: receive path") Fixes: b9be6f1 ("rdma/siw: transmit path") Fixes: 303ae1c ("rdma/siw: application interface") Link: https://lore.kernel.org/r/[email protected] Reported-by: Kamal Heib <[email protected]> Reported-by: Yi Zhang <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Bernard Metzler <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit 429fa96 ] The size of tx_valid_cpus was calculated under the assumption that the numa nodes identifiers are continuous, which is not the case in all archs as this could lead to the following panic when trying to access an invalid tx_valid_cpus index, avoid the following panic by using nr_node_ids instead of num_online_nodes() to allocate the tx_valid_cpus size. Kernel attempted to read user page (8) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000008 Faulting instruction address: 0xc0080000081b4a90 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: siw(+) rfkill rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm sunrpc ib_umad rdma_cm ib_cm iw_cm i40iw ib_uverbs ib_core i40e ses enclosure scsi_transport_sas ipmi_powernv ibmpowernv at24 ofpart ipmi_devintf regmap_i2c ipmi_msghandler powernv_flash uio_pdrv_genirq uio mtd opal_prd zram ip_tables xfs libcrc32c sd_mod t10_pi ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm vmx_crypto aacraid drm_panel_orientation_quirks dm_mod CPU: 40 PID: 3279 Comm: modprobe Tainted: G W X --------- --- 5.11.0-0.rc4.129.eln108.ppc64le #2 NIP: c0080000081b4a90 LR: c0080000081b4a2c CTR: c0000000007ce1c0 REGS: c000000027fa77b0 TRAP: 0300 Tainted: G W X --------- --- (5.11.0-0.rc4.129.eln108.ppc64le) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 44224882 XER: 00000000 CFAR: c0000000007ce200 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 0 GPR00: c0080000081b4a2c c000000027fa7a50 c0080000081c3900 0000000000000040 GPR04: c000000002023080 c000000012e1c300 000020072ad70000 0000000000000001 GPR08: c000000001726068 0000000000000008 0000000000000008 c0080000081b5758 GPR12: c0000000007ce1c0 c0000007fffc3000 00000001590b1e40 0000000000000000 GPR16: 0000000000000000 0000000000000001 000000011ad68fc8 00007fffcc09c5c8 GPR20: 0000000000000008 0000000000000000 00000001590b2850 00000001590b1d30 GPR24: 0000000000043d68 000000011ad67a80 000000011ad67a80 0000000000100000 GPR28: c000000012e1c300 c0000000020271c8 0000000000000001 c0080000081bf608 NIP [c0080000081b4a90] siw_init_cpulist+0x194/0x214 [siw] LR [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] Call Trace: [c000000027fa7a50] [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] (unreliable) [c000000027fa7a90] [c0080000081b4e68] siw_init_module+0x40/0x2a0 [siw] [c000000027fa7b30] [c0000000000124f4] do_one_initcall+0x84/0x2e0 [c000000027fa7c00] [c000000000267ffc] do_init_module+0x7c/0x350 [c000000027fa7c90] [c00000000026a180] __do_sys_init_module+0x210/0x250 [c000000027fa7db0] [c0000000000387e4] system_call_exception+0x134/0x230 [c000000027fa7e10] [c00000000000d660] system_call_common+0xf0/0x27c Instruction dump: 40810044 3d420000 e8bf0000 e88a82d0 3d420000 e90a82c8 792a1f24 7cc4302a 7d2642aa 79291f24 7d25482a 7d295214 <7d4048a8> 7d4a3b78 7d4049ad 40c2fff4 Fixes: bdcf26b ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kamal Heib <[email protected]> Reviewed-by: Bernard Metzler <[email protected]> Tested-by: Yi Zhang <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/2059014 [ Upstream commit 2b44760 ] Running the following two commands in parallel on a multi-processor AArch64 machine can sporadically produce an unexpected warning about duplicate histogram entries: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist sleep 0.001 done $ stress-ng --sysbadaddr $(nproc) The warning looks as follows: [ 2911.172474] ------------[ cut here ]------------ [ 2911.173111] Duplicates detected: 1 [ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408 [ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E) [ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1 [ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01 [ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018 [ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408 [ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408 [ 2911.185310] sp : ffff8000a1513900 [ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001 [ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008 [ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180 [ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff [ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8 [ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731 [ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c [ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8 [ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000 [ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480 [ 2911.194259] Call trace: [ 2911.194626] tracing_map_sort_entries+0x3e0/0x408 [ 2911.195220] hist_show+0x124/0x800 [ 2911.195692] seq_read_iter+0x1d4/0x4e8 [ 2911.196193] seq_read+0xe8/0x138 [ 2911.196638] vfs_read+0xc8/0x300 [ 2911.197078] ksys_read+0x70/0x108 [ 2911.197534] __arm64_sys_read+0x24/0x38 [ 2911.198046] invoke_syscall+0x78/0x108 [ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8 [ 2911.199157] do_el0_svc+0x28/0x40 [ 2911.199613] el0_svc+0x40/0x178 [ 2911.200048] el0t_64_sync_handler+0x13c/0x158 [ 2911.200621] el0t_64_sync+0x1a8/0x1b0 [ 2911.201115] ---[ end trace 0000000000000000 ]--- The problem appears to be caused by CPU reordering of writes issued from __tracing_map_insert(). The check for the presence of an element with a given key in this function is: val = READ_ONCE(entry->val); if (val && keys_match(key, val->key, map->key_size)) ... The write of a new entry is: elt = get_free_elt(map); memcpy(elt->key, key, map->key_size); entry->val = elt; The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;" stores may become visible in the reversed order on another CPU. This second CPU might then incorrectly determine that a new key doesn't match an already present val->key and subsequently insert a new element, resulting in a duplicate. Fix the problem by adding a write barrier between "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;", and for good measure, also use WRITE_ONCE(entry->val, elt) for publishing the element. The sequence pairs with the mentioned "READ_ONCE(entry->val);" and the "val->key" check which has an address dependency. The barrier is placed on a path executed when adding an element for a new key. Subsequent updates targeting the same key remain unaffected. From the user's perspective, the issue was introduced by commit c193707 ("tracing: Remove code which merges duplicates"), which followed commit cbf4100 ("tracing: Add support to detect and avoid duplicates"). The previous code operated differently; it inherently expected potential races which result in duplicates but merged them later when they occurred. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Fixes: c193707 ("tracing: Remove code which merges duplicates") Signed-off-by: Petr Pavlu <[email protected]> Acked-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

…volume BugLink: https://bugs.launchpad.net/bugs/2059014 commit 7081929 upstream. If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort: BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: <TASK> ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort. Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion. CC: [email protected] # 4.14+ Reviewed-by: Sweet Tea Dorminy <[email protected]> Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2059014 [ Upstream commit fc3a553 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2059014 [ Upstream commit 47bf0f8 ] ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-fkuehlin #276 Not tainted ------------------------------------------------------ kworker/8:2/2676 is trying to acquire lock: ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550 but task is already holding lock: ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&svms->lock){+.+.}-{3:3}: __mutex_lock+0x97/0xd30 kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu] kfd_ioctl+0x1b2/0x5d0 [amdgpu] __x64_sys_ioctl+0x86/0xc0 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #1 (&mm->mmap_lock){++++}-{3:3}: down_read+0x42/0x160 svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}: __lock_acquire+0x1426/0x2200 lock_acquire+0xc1/0x2b0 __flush_work+0x80/0x550 __cancel_work_timer+0x109/0x190 svm_range_bo_release+0xdc/0x1c0 [amdgpu] svm_range_free+0x175/0x180 [amdgpu] svm_range_deferred_list_work+0x15d/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 other info that might help us debug this: Chain exists of: (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&svms->lock); lock(&mm->mmap_lock); lock(&svms->lock); lock((work_completion)(&svm_bo->eviction_work)); I believe this cannot really lead to a deadlock in practice, because svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO refcount is non-0. That means it's impossible that svm_range_bo_release is running concurrently. However, there is no good way to annotate this. To avoid the problem, take a BO reference in svm_range_schedule_evict_svm_bo instead of in the worker. That way it's impossible for a BO to get freed while eviction work is pending and the cancel_work_sync call in svm_range_bo_release can be eliminated. v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also removed redundant checks that are already done in amdkfd_fence_enable_signaling. Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Philip Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/2060142 [ Upstream commit e64e710 ] pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However, the code assumes the resource is allocated and it uses the resource address to find out the segment(s) which need to be mapped to the PE. In the unlikely case where the resource hasn't been allocated, the computation for the segment number is garbage, which can lead to invalid memory access and potentially a kernel crash, such as: [ ] pci_bus 0002:02: Configuring PE for bus [ ] pci 0002:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc [ ] BUG: Kernel NULL pointer dereference on write at 0x00000000 [ ] Faulting instruction address: 0xc00000000005eac4 [ ] Oops: Kernel access of bad area, sig: 7 [#1] [ ] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV [ ] Modules linked in: [ ] CPU: 12 PID: 1 Comm: swapper/20 Not tainted 5.10.50-openpower1 #2 [ ] NIP: c00000000005eac4 LR: c00000000005ea44 CTR: 0000000030061b9c [ ] REGS: c000200007383650 TRAP: 0300 Not tainted (5.10.50-openpower1) [ ] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000224 XER: 20040000 [ ] CFAR: c00000000005eaa0 DAR: 0000000000000000 DSISR: 02080000 IRQMASK: 0 [ ] GPR00: c00000000005dd98 c0002000073838e0 c00000000185de00 c000200fff018960 [ ] GPR04: 00000000000000fc 0000000000000003 0000000000000000 0000000000000000 [ ] GPR08: 0000000000000000 0000000000000000 0000000000000000 9000000000001033 [ ] GPR12: 0000000031cb0000 c000000ffffe6a80 c000000000010a58 0000000000000000 [ ] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ ] GPR20: 0000000000000000 0000000000000000 0000000000000000 c00000000711e200 [ ] GPR24: 0000000000000100 c000200009501120 c00020000cee2800 00000000000003ff [ ] GPR28: c000200fff018960 0000000000000000 c000200ffcb7fd00 0000000000000000 [ ] NIP [c00000000005eac4] pnv_ioda_setup_pe_res+0x94/0x1a0 [ ] LR [c00000000005ea44] pnv_ioda_setup_pe_res+0x14/0x1a0 [ ] Call Trace: [ ] [c0002000073838e0] [c00000000005eb98] pnv_ioda_setup_pe_res+0x168/0x1a0 (unreliable) [ ] [c000200007383970] [c00000000005dd98] pnv_pci_ioda_dma_dev_setup+0x43c/0x970 [ ] [c000200007383a60] [c000000000032cdc] pcibios_bus_add_device+0x78/0x18c [ ] [c000200007383aa0] [c00000000028f2bc] pci_bus_add_device+0x28/0xbc [ ] [c000200007383b10] [c00000000028f3a0] pci_bus_add_devices+0x50/0x7c [ ] [c000200007383b50] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c [ ] [c000200007383b90] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c [ ] [c000200007383bd0] [c00000000069ad0c] pcibios_init+0xf0/0x104 [ ] [c000200007383c50] [c0000000000106d8] do_one_initcall+0x84/0x1c4 [ ] [c000200007383d20] [c0000000006910b8] kernel_init_freeable+0x264/0x268 [ ] [c000200007383dc0] [c000000000010a68] kernel_init+0x18/0x138 [ ] [c000200007383e20] [c00000000000cbfc] ret_from_kernel_thread+0x5c/0x80 [ ] Instruction dump: [ ] 7f89e840 409d000c 7fbbf840 409c000c 38210090 4848f448 809c002c e95e0120 [ ] 7ba91764 38a00003 57a7043e 38c00000 <7c8a492e> 5484043e e87e0018 4bff23bd Hitting the problem is not that easy. It was seen with a (semi-bogus) PCI device with a class code of 0. The generic PCI framework doesn't allocate resources in such a case. The patch is simply skipping resources which are still flagged with IORESOURCE_UNSET. We don't have the problem with 64-bit mem resources, as the address of the resource is checked to be within the range of the 64-bit mmio window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64(). Reported-by: Andrew Jeffery <[email protected]> Fixes: 23e7942 ("powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()") Signed-off-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

…messages (#2)

@offset

BugLink: https://bugs.launchpad.net/bugs/2065435 [ Upstream commit 50ed48c80fecbe17218afed4f8bed005c802976c ] Tests with hot-plugging crytpo cards on KVM guests with debug kernel build revealed an use after free for the load field of the struct zcrypt_card. The reason was an incorrect reference handling of the zcrypt card object which could lead to a free of the zcrypt card object while it was still in use. This is an example of the slab message: kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43 kernel: kmalloc_trace+0x3f2/0x470 kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt] kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4] kernel: ap_device_probe+0x15c/0x290 kernel: really_probe+0xd2/0x468 kernel: driver_probe_device+0x40/0xf0 kernel: __device_attach_driver+0xc0/0x140 kernel: bus_for_each_drv+0x8c/0xd0 kernel: __device_attach+0x114/0x198 kernel: bus_probe_device+0xb4/0xc8 kernel: device_add+0x4d2/0x6e0 kernel: ap_scan_adapter+0x3d0/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43 kernel: kfree+0x37e/0x418 kernel: zcrypt_card_put+0x54/0x80 [zcrypt] kernel: ap_device_remove+0x4c/0xe0 kernel: device_release_driver_internal+0x1c4/0x270 kernel: bus_remove_device+0x100/0x188 kernel: device_del+0x164/0x3c0 kernel: device_unregister+0x30/0x90 kernel: ap_scan_adapter+0xc8/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: kthread+0x150/0x168 kernel: __ret_from_fork+0x3c/0x58 kernel: ret_from_fork+0xa/0x30 kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff) kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88 kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........ kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk. kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........ kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2 kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux) kernel: Call Trace: kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120 kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140 kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8 kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8 kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0 kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8 kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8 kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590 kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0 kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0 kernel: [<00000000c9b919dc>] ext4_htree_fill_tree+0x134/0x400 kernel: [<00000000c9b4b3d0>] ext4_dx_readdir+0x160/0x2f0 kernel: [<00000000c9b4bedc>] ext4_readdir+0x5f4/0x760 kernel: [<00000000c9a7efc4>] iterate_dir+0xb4/0x280 kernel: [<00000000c9a7f1ea>] __do_sys_getdents64+0x5a/0x120 kernel: [<00000000ca5d6946>] __do_syscall+0x256/0x310 kernel: [<00000000ca5eea10>] system_call+0x70/0x98 kernel: INFO: lockdep is turned off. kernel: FIX kmalloc-96: Restoring Poison 0x00000000885a7512-0x00000000885a7513=0x6b kernel: FIX kmalloc-96: Marking all objects used The fix is simple: Before use of the queue not only the queue object but also the card object needs to increase it's reference count with a call to zcrypt_card_get(). Similar after use of the queue not only the queue but also the card object's reference count is decreased with zcrypt_card_put(). Signed-off-by: Harald Freudenberger <[email protected]> Reviewed-by: Holger Dengler <[email protected]> Cc: [email protected] Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2065805 [ Upstream commit 1947b92464c3268381604bbe2ac977a3fd78192f ] Parallel testing appears to show a race between allocating and setting evsel ids. As there is a bounds check on the xyarray it yields a segv like: ``` AddressSanitizer:DEADLYSIGNAL ================================================================= ==484408==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 ==484408==The signal is caused by a WRITE memory access. ==484408==Hint: address points to the zero page. #0 0x55cef5d4eff4 in perf_evlist__id_hash tools/lib/perf/evlist.c:256 #1 0x55cef5d4f132 in perf_evlist__id_add tools/lib/perf/evlist.c:274 #2 0x55cef5d4f545 in perf_evlist__id_add_fd tools/lib/perf/evlist.c:315 #3 0x55cef5a1923f in store_evsel_ids util/evsel.c:3130 #4 0x55cef5a19400 in evsel__store_ids util/evsel.c:3147 #5 0x55cef5888204 in __run_perf_stat tools/perf/builtin-stat.c:832 #6 0x55cef5888c06 in run_perf_stat tools/perf/builtin-stat.c:960 #7 0x55cef58932db in cmd_stat tools/perf/builtin-stat.c:2878 ... ``` Avoid this crash by early exiting the perf_evlist__id_add_fd and perf_evlist__id_add is the access is out-of-bounds. Signed-off-by: Ian Rogers <[email protected]> Cc: Yang Jihong <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2067959 [ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

… update BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 79b5b4b18bc85b19d3a518483f9abbbe6d7b3ba4 ] The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: 2bffc53 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/1fcce0a60b231ebeb2515d91022284ba7b4ffe7a.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

…nix_gc(). BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 1971d13ffa84a551d29a81fdf5b5ec5be166ac83 ] syzbot reported a lockdep splat regarding unix_gc_lock and unix_state_lock(). One is called from recvmsg() for a connected socket, and another is called from GC for TCP_LISTEN socket. So, the splat is false-positive. Let's add a dedicated lock class for the latter to suppress the splat. Note that this change is not necessary for net-next.git as the issue is only applied to the old GC impl. [0]: WARNING: possible circular locking dependency detected 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Not tainted ----------------------------------------------------- kworker/u8:1/11 is trying to acquire lock: ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 but task is already holding lock: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (unix_gc_lock){+.+.}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] unix_notinflight+0x13d/0x390 net/unix/garbage.c:140 unix_detach_fds net/unix/af_unix.c:1819 [inline] unix_destruct_scm+0x221/0x350 net/unix/af_unix.c:1876 skb_release_head_state+0x100/0x250 net/core/skbuff.c:1188 skb_release_all net/core/skbuff.c:1200 [inline] __kfree_skb net/core/skbuff.c:1216 [inline] kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1252 kfree_skb include/linux/skbuff.h:1262 [inline] manage_oob net/unix/af_unix.c:2672 [inline] unix_stream_read_generic+0x1125/0x2700 net/unix/af_unix.c:2749 unix_stream_splice_read+0x239/0x320 net/unix/af_unix.c:2981 do_splice_read fs/splice.c:985 [inline] splice_file_to_pipe+0x299/0x500 fs/splice.c:1295 do_splice+0xf2d/0x1880 fs/splice.c:1379 __do_splice fs/splice.c:1436 [inline] __do_sys_splice fs/splice.c:1652 [inline] __se_sys_splice+0x331/0x4a0 fs/splice.c:1634 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&u->lock){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(unix_gc_lock); lock(&u->lock); lock(unix_gc_lock); lock(&u->lock); *** DEADLOCK *** 3 locks held by kworker/u8:1/11: #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x17c0 kernel/workqueue.c:3335 #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x17c0 kernel/workqueue.c:3335 #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 stack backtrace: CPU: 0 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: events_unbound __unix_gc Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=fa379358c28cc87cc307 Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/2070028 [ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ] When using --Summary mode, added MSRs in raw mode always print zeros. Print the actual register contents. Example, with patch: note the added column: --add msr0x64f,u32,package,raw,REASON Where: 0x64F is MSR_CORE_PERF_LIMIT_REASONS Busy% Bzy_MHz PkgTmp PkgWatt CorWatt REASON 0.00 4800 35 1.42 0.76 0x00000000 0.00 4801 34 1.42 0.76 0x00000000 80.08 4531 66 108.17 107.52 0x08000000 98.69 4530 66 133.21 132.54 0x08000000 99.28 4505 66 128.26 127.60 0x0c000400 99.65 4486 68 124.91 124.25 0x0c000400 99.63 4483 68 124.90 124.25 0x0c000400 79.34 4481 41 99.80 99.13 0x0c000000 0.00 4801 41 1.40 0.73 0x0c000000 Where, for the test processor (i5-10600K): PKG Limit #1: 125.000 Watts, 8.000000 sec MSR bit 26 = log; bit 10 = status PKG Limit #2: 136.000 Watts, 0.002441 sec MSR bit 27 = log; bit 11 = status Example, without patch: Busy% Bzy_MHz PkgTmp PkgWatt CorWatt REASON 0.01 4800 35 1.43 0.77 0x00000000 0.00 4801 35 1.39 0.73 0x00000000 83.49 4531 66 112.71 112.06 0x00000000 98.69 4530 68 133.35 132.69 0x00000000 99.31 4500 67 127.96 127.30 0x00000000 99.63 4483 69 124.91 124.25 0x00000000 99.61 4481 69 124.90 124.25 0x00000000 99.61 4481 71 124.92 124.25 0x00000000 59.35 4479 42 75.03 74.37 0x00000000 0.00 4800 42 1.39 0.73 0x00000000 0.00 4801 42 1.42 0.76 0x00000000 c000000 [lenb: simplified patch to apply only to package scope] Signed-off-by: Doug Smythies <[email protected]> Signed-off-by: Len Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/2072617 [ Upstream commit 3d6586008f7b638f91f3332602592caa8b00b559 ] Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 8a6e85f ("virt: acrn: obtain pa from VMA with PFNMAP flag") Signed-off-by: David Hildenbrand <[email protected]> Cc: Alex Williamson <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Fei Li <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Yonghua Huang <[email protected]> Cc: Sean Christopherson <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2072617 [ Upstream commit 3ebc46ca8675de6378e3f8f40768e180bb8afa66 ] In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Yue Sun <[email protected]> Reported-by: xingwei lee <[email protected]> Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/ Fixes: e3118e8 ("net: tcp: add DCTCP congestion control algorithm") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2073765 commit 22f00812862564b314784167a89f27b444f82a46 upstream. The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2073765 commit c0a40097f0bc81deafc15f9195d1fb54595cd6d0 upstream. Synchronize the dev->driver usage in really_probe() and dev_uevent(). These can run in different threads, what can result in the following race condition for dev->driver uninitialization: Thread #1: ========== really_probe() { ... probe_failed: ... device_unbind_cleanup(dev) { ... dev->driver = NULL; // <= Failed probe sets dev->driver to NULL ... } ... } Thread #2: ========== dev_uevent() { ... if (dev->driver) // If dev->driver is NULLed from really_probe() from here on, // after above check, the system crashes add_uevent_var(env, "DRIVER=%s", dev->driver->name); ... } really_probe() holds the lock, already. So nothing needs to be done there. dev_uevent() is called with lock held, often, too. But not always. What implies that we can't add any locking in dev_uevent() itself. So fix this race by adding the lock to the non-protected path. This is the path where above race is observed: dev_uevent+0x235/0x380 uevent_show+0x10c/0x1f0 <= Add lock here dev_attr_show+0x3a/0xa0 sysfs_kf_seq_show+0x17c/0x250 kernfs_seq_show+0x7c/0x90 seq_read_iter+0x2d7/0x940 kernfs_fop_read_iter+0xc6/0x310 vfs_read+0x5bc/0x6b0 ksys_read+0xeb/0x1b0 __x64_sys_read+0x42/0x50 x64_sys_call+0x27ad/0x2d30 do_syscall_64+0xcd/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Similar cases are reported by syzkaller in https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a But these are regarding the *initialization* of dev->driver dev->driver = drv; As this switches dev->driver to non-NULL these reports can be considered to be false-positives (which should be "fixed" by this commit, as well, though). The same issue was reported and tried to be fixed back in 2015 in https://lore.kernel.org/lkml/[email protected]/ already. Fixes: 239378f ("Driver core: add uevent vars for devices of a class") Cc: stable <[email protected]> Cc: [email protected] Cc: Ashish Sangwan <[email protected]> Cc: Namjae Jeon <[email protected]> Signed-off-by: Dirk Behme <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2073765 [ Upstream commit f1e197a665c2148ebc25fe09c53689e60afea195 ] trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. Signed-off-by: Wander Lairson Costa <[email protected]> Reported-by: Hu Chunyu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2073765 commit 6cd4a78d962bebbaf8beb7d2ead3f34120e3f7b2 upstream. It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). Fixes: c5dbb89 ("bpf: Expose bpf_get_socket_cookie to tracing programs") Suggested-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Ignat Korchagin <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/netdev/[email protected]/T/ Reviewed-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: D. Wythe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2073765 commit be346c1a6eeb49d8fda827d2a9522124c2f72f36 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

…messages (#2)

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

c218701

…messages

pzakha requested review from pcd1193182, sdimitro and don-brady February 4, 2021 23:39

pcd1193182 approved these changes Feb 8, 2021

View reviewed changes

sdimitro approved these changes Feb 8, 2021

View reviewed changes

sebroy reviewed Feb 9, 2021

View reviewed changes

sebroy approved these changes Feb 9, 2021

View reviewed changes

pzakha merged commit 787511f into delphix:master Feb 9, 2021

jwk404 pushed a commit to jwk404/linux-kernel-generic that referenced this pull request Apr 1, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

764c8c7

…messages (delphix#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 6, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

55572b0

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 16, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

d234f31

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 20, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

95c5b66

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 20, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

cd51e5f

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 16, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

c407c69

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Jun 30, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

40bb131

…messages (#2)

manoj-joseph pushed a commit that referenced this pull request Jul 30, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

b27fb4b

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Jul 31, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

a027e69

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Aug 6, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

6f95878

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Aug 22, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

18620ae

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Aug 23, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

22adebb

…messages (#2)

prakashsurya pushed a commit that referenced this pull request Sep 23, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

438ac46

…messages (#2)

palash-gandhi pushed a commit that referenced this pull request Oct 16, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

875ba2f

…messages (#2)

palash-gandhi mentioned this pull request Oct 16, 2024

DLPX-92453 Cherry-pick Delphix commits of linux-kernel-generic for LTS upgrade #44

Merged

delphix-devops-bot pushed a commit that referenced this pull request Oct 20, 2024

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

e62fb85

…messages (#2)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

pzakha commented Feb 4, 2021 •

edited

Loading

sebroy Feb 9, 2021

pzakha Feb 9, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

Conversation

pzakha commented Feb 4, 2021 • edited Loading

PRs for other flavors

Testing

sebroy Feb 9, 2021

Choose a reason for hiding this comment

pzakha Feb 9, 2021

Choose a reason for hiding this comment

pzakha commented Feb 4, 2021 •

edited

Loading