Merging release-v1.10.0 to main ( Release actvity )

charts/cosi/Chart.yaml

@@ -1,4 +1,4 @@
-# Copyright © 2023 Dell Inc. or its subsidiaries. All Rights Reserved.
+# Copyright © 2024 Dell Inc. or its subsidiaries. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -29,8 +29,9 @@ type: application
 # Versions are expected to follow Semantic Versioning (https://semver.org/)
 version: 0.1.2
 
+
 # This is the version number of the application being deployed. This version number should be
 # incremented each time you make changes to the application. Versions are not expected to
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
-appVersion: 0.1.1-alpha
+appVersion: 1.1.0-alpha

charts/cosi/values.yaml

@@ -1,4 +1,4 @@
-# Copyright © 2023 Dell Inc. or its subsidiaries. All Rights Reserved.
+# Copyright © 2024 Dell Inc. or its subsidiaries. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -31,7 +31,7 @@ provisioner:
     # repository is the COSI driver provisioner container image repository.
     repository: "docker.io/dellemc/cosi"
     # tag is the COSI driver provisioner container image tag.
-    tag: "v0.1.1"
+    tag: "v0.2.0"
     # pullPolicy is the COSI driver provisioner container image pull policy.
     pullPolicy: "IfNotPresent"
 

charts/csi-isilon/Chart.yaml

@@ -1,11 +1,11 @@
 apiVersion: v2
 name: csi-isilon
-version: 2.9.1
-appVersion: "2.9.1"
-kubeVersion: ">= 1.21.0 < 1.29.0"
+version: 2.10.0
+appVersion: "2.10.0"
+kubeVersion: ">= 1.21.0 < 1.30.0"
 #If you are using a complex K8s version like "v1.22.3-mirantis-1", use this kubeVersion check instead
 #WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-#kubeVersion: ">= 1.21.0-0 < 1.29.0-0"
+#kubeVersion: ">= 1.21.0-0 < 1.30.0-0"
 description: |
   PowerScale CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as

charts/csi-isilon/templates/controller.yaml

@@ -276,20 +276,8 @@ spec:
           imagePullPolicy: {{ .Values.imagePullPolicy }}
           args:
             - "--csi-address={{ $driverSockPath }}"
-            - "--leader-election"
             - "--timeout=120s"
             - "--v=5"
-            {{- if hasKey .Values.controller "leaderElection" }}
-            {{- if hasKey .Values.controller.leaderElection "leaderElectionRenewDeadline" }}
-            - "--leader-election-renew-deadline={{ .Values.controller.leaderElection.leaderElectionRenewDeadline }}"
-            {{end}}
-            {{- if hasKey .Values.controller.leaderElection "leaderElectionLeaseDuration" }}
-            - "--leader-election-lease-duration={{ .Values.controller.leaderElection.leaderElectionLeaseDuration }}"
-            {{end}}
-            {{- if hasKey .Values.controller.leaderElection "leaderElectionLeaseDuration" }}
-            - "--leader-election-retry-period={{ .Values.controller.leaderElection.leaderElectionRetryPeriod }}"
-            {{end}}
-            {{end}}
           command: [ "/csi-metadata-retriever" ]
           env:
             - name: CSI_RETRIEVER_ENDPOINT

charts/csi-isilon/values.yaml

@@ -2,24 +2,24 @@
 ########################
 # version: version of this values file
 # Note: Do not change this value
-version: "v2.9.1"
+version: "v2.10.0"
 
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-isilon:v2.9.1
+  driver: dellemc/csi-isilon:v2.10.0
   # CSI sidecars
-  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.4.2          
-  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v3.6.2
-  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v6.3.2
-  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.9.2
-  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.9.1
-  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.10.0
+  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
+  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
+  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v7.0.1
+  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.10.0
+  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.10.0
+  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
 
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.7.1
-  podmon: dellemc/podmon:v1.8.1
-  authorization: dellemc/csm-authorization-sidecar:v1.9.1
-  metadataretriever: dellemc/csi-metadata-retriever:v1.6.1
+  replication: dellemc/dell-csi-replicator:v1.8.0
+  podmon: dellemc/podmon:v1.9.0
+  authorization: dellemc/csm-authorization-sidecar:v1.10.0
+  metadataretriever: dellemc/csi-metadata-retriever:v1.7.2
   encryption: dellemc/csm-encryption:v0.3.0
 
 # CSI driver log level
@@ -65,7 +65,7 @@ verbose: 1
 
 # Specify kubelet config dir path.
 # Ensure that the config.yaml file is present at this path.
-# Default value: None
+# Default value: /var/lib/kubelet
 kubeletConfigDir: /var/lib/kubelet
 
 # enableCustomTopology: Specify if custom topology label <provisionerName>.dellemc.com/<powerscalefqdnorip>:<provisionerName>

charts/csi-powermax/Chart.yaml

@@ -1,22 +1,22 @@
 apiVersion: v2
-appVersion: "2.9.1"
+appVersion: "2.10.0"
 name: csi-powermax
-version: 2.9.1
+version: 2.10.0
 description: |
   PowerMax CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a PowerMax StorageClass.
 type: application
-kubeVersion: ">= 1.23.0 < 1.29.0"
+kubeVersion: ">= 1.23.0 < 1.30.0"
 # If you are using a complex K8s version like "v1.23.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.23.0-0 < 1.29.0-0"
+# kubeVersion: ">= 1.23.0-0 < 1.30.0-0"
 keywords:
 - csi
 - storage
 dependencies:
   - name: csireverseproxy
-    version: 2.8.1
+    version: 2.9.0
     condition: required
 home: https://github.com/dell/csi-powermax
 icon: https://avatars1.githubusercontent.com/u/20958494?s=200&v=4

charts/csi-powermax/charts/csireverseproxy/Chart.yaml

@@ -4,6 +4,6 @@ description: A Helm chart for CSI PowerMax ReverseProxy
 
 type: application
 
-version: 2.8.1
+version: 2.9.0
 
-appVersion: 2.8.1
+appVersion: 2.9.0

charts/csi-powermax/charts/csireverseproxy/values.yaml

@@ -1,4 +1,4 @@
-image: dellemc/csipowermax-reverseproxy:v2.8.1
+image: dellemc/csipowermax-reverseproxy:v2.9.0
 port: 2222
 
 # TLS secret which is used for setting up the proxy HTTPS server

charts/csi-powermax/templates/controller.yaml

@@ -470,8 +470,6 @@ spec:
               value: /app/tls
             - name: X_CSI_REVPROXY_WATCH_NAMESPACE
               value: {{ .Release.Namespace }}
-            - name: X_CSI_REVPROXY_IS_LEADER_ENABLED
-              value: "false"
           volumeMounts:
             - name: configmap-volume
               mountPath: /etc/config/configmap

charts/csi-powermax/values.yaml

@@ -48,24 +48,24 @@ global:
 
 # Current version of the driver
 # Don't modify this value as this value will be used by the install script
-version: "v2.9.1"
+version: "v2.10.0"
 
 # "images" defines every container images used for the driver and its sidecars.
 #  To use your own images, or a private registry, change the values here.
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-powermax:v2.9.1
-  csireverseproxy: dellemc/csipowermax-reverseproxy:v2.8.1
+  driver: dellemc/csi-powermax:v2.10.0
+  csireverseproxy: dellemc/csipowermax-reverseproxy:v2.9.0
   # CSI sidecars
-  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.4.2
-  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v3.6.2
-  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v6.3.2
-  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.9.2
-  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.9.1
-  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.10.0
+  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
+  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
+  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v7.0.1
+  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.10.0
+  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.10.0
+  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.7.1
-  authorization: dellemc/csm-authorization-sidecar:v1.9.1
+  replication: dellemc/dell-csi-replicator:v1.8.0
+  authorization: dellemc/csm-authorization-sidecar:v1.10.0
   migration: dellemc/dell-csi-migrator:v1.3.0
   # Node rescan sidecar does a rescan on nodes for identifying new paths
   # Default value: dellemc/dell-csi-node-rescanner:v1.0.1
@@ -104,7 +104,7 @@ imagePullPolicy: IfNotPresent
 
 # Specify kubelet config dir path.
 # Ensure that the config.yaml file is present at this path.
-# Default value: None
+# Default value: /var/lib/kubelet
 kubeletConfigDir: /var/lib/kubelet
 
 # fsGroupPolicy: Defines if the underlying volume supports changing ownership and permission of the volume before being mounted.

charts/csi-powerstore/Chart.yaml

@@ -14,18 +14,18 @@
 #
 #
 apiVersion: v2
-appVersion: "2.9.1"
+appVersion: "2.10.0"
 name: csi-powerstore
-version: 2.9.1
+version: 2.10.0
 description: |
   PowerStore CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a PowerStore StorageClass.
 type: application
-kubeVersion: ">= 1.24.0 < 1.29.0"
+kubeVersion: ">= 1.24.0 < 1.30.0"
 # If you are using a complex K8s version like "v1.24.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.24.0-0 < 1.29.0-0"
+# kubeVersion: ">= 1.24.0-0 < 1.30.0-0"
 keywords:
 - csi
 - storage

charts/csi-powerstore/values.yaml

@@ -23,30 +23,30 @@
 driverName: "csi-powerstore.dellemc.com"
 # "version" is used to verify the values file matches driver version
 # Not recommend to change
-version: v2.9.1
+version: v2.10.0
 
 # "images" defines every container images used for the driver and its sidecars.
 #  To use your own images, or a private registry, change the values here.
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-powerstore:v2.9.1
+  driver: dellemc/csi-powerstore:v2.10.0
   # CSI sidecars
-  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.4.2
-  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v3.6.2
-  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v6.3.2
-  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.9.2
-  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.9.1
-  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.10.0
+  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
+  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
+  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v7.0.1
+  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.10.0
+  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.10.0
+  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
 
   # CSM sidecars
-  replication: dellemc/dell-csi-replicator:v1.7.1
-  vgsnapshotter: dellemc/csi-volumegroup-snapshotter:v1.4.0
-  podmon: dellemc/podmon:v1.8.1
-  metadataretriever: dellemc/csi-metadata-retriever:v1.6.1
+  replication: dellemc/dell-csi-replicator:v1.8.0
+  vgsnapshotter: dellemc/csi-volumegroup-snapshotter:v1.5.0
+  podmon: dellemc/podmon:v1.9.0
+  metadataretriever: dellemc/csi-metadata-retriever:v1.7.2
 
 # Specify kubelet config dir path.
 # Ensure that the config.yaml file is present at this path.
-# Default value: None
+# Default value: /var/lib/kubelet
 kubeletConfigDir: /var/lib/kubelet
 
 # nodeFCPortsFilterFile: It is the name of the environment variable which store path to the file which

charts/csi-unity/Chart.yaml

@@ -1,16 +1,16 @@
 apiVersion: v2
-appVersion: 2.9.1
+appVersion: 2.10.0
 name: csi-unity
-version: 2.9.1
+version: 2.10.0
 description: |
   Unity XT CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a Unity XT StorageClass.
 type: application
-kubeVersion: ">= 1.24.0 < 1.29.0"
+kubeVersion: ">= 1.24.0 < 1.30.0"
 # If you are using a complex K8s version like "v1.24.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.24.0-0 < 1.29.0-0"
+# kubeVersion: ">= 1.24.0-0 < 1.30.0-0"
 keywords:
 - csi
 - storage

charts/csi-unity/values.yaml

@@ -3,22 +3,22 @@
 
 # version: version of this values file
 # Note: Do not change this value
-# Examples : "v2.9.1" , "nightly"
-version: "v2.9.1"
+# Examples : "v2.9.0" , "nightly"
+version: "v2.10.0"
 
 images:
   # "driver" defines the container image, used for the driver container.
-  driver: dellemc/csi-unity:v2.9.1
+  driver: dellemc/csi-unity:v2.10.0
   # CSI sidecars
-  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.4.2
-  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v3.6.2
-  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v6.3.2
-  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.9.2
-  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.9.1
-  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.10.0
+  attacher: registry.k8s.io/sig-storage/csi-attacher:v4.5.0
+  provisioner: registry.k8s.io/sig-storage/csi-provisioner:v4.0.0
+  snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v7.0.1
+  resizer: registry.k8s.io/sig-storage/csi-resizer:v1.10.0
+  registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.10.0
+  healthmonitor: registry.k8s.io/sig-storage/csi-external-health-monitor-controller:v0.11.0
 
   # CSM sidecars
-  podmon: dellemc/podmon:v1.8.1
+  podmon: dellemc/podmon:v1.9.0
 
 # LogLevel is used to set the logging level of the driver.
 # Allowed values: "error", "warn"/"warning", "info", "debug"
@@ -41,7 +41,7 @@ imagePullPolicy: Always
 
 # Specify kubelet config dir path.
 # Ensure that the config.yaml file is present at this path.
-# Default value: None
+# Default value: /var/lib/kubelet
 kubeletConfigDir: /var/lib/kubelet
 
 # fsGroupPolicy: Defines if the underlying volume supports changing ownership and permission of the volume before being mounted.

charts/csi-vxflexos/Chart.yaml

@@ -1,15 +1,15 @@
 apiVersion: v2
-appVersion: "2.9.2"
+appVersion: "2.10.0"
 name: csi-vxflexos
-version: "2.9.2"
+version: "2.10.0"
 description: |
   VxFlex OS CSI (Container Storage Interface) driver Kubernetes
   integration. This chart includes everything required to provision via CSI as
   well as a VxFlex OS StorageClass.
-kubeVersion: ">= 1.21.0 < 1.29.0"
+kubeVersion: ">= 1.21.0 < 1.30.0"
 # If you are using a complex K8s version like "v1.21.3-mirantis-1", use this kubeVersion check instead
 # WARNING: this version of the check will allow the use of alpha and beta versions, which is NOT SUPPORTED
-# kubeVersion: ">= 1.21.0-0 < 1.29.0-0"
+# kubeVersion: ">= 1.21.0-0 < 1.30.0-0"
 keywords:
 - csi
 - storage

charts/csi-vxflexos/templates/node.yaml

@@ -219,6 +219,11 @@ spec:
               value: "{{ .Values.node.renameSDC.prefix }}"
             {{- end }}
             {{- end }}
+            - name: X_CSI_POWERFLEX_KUBE_NODE_NAME
+              valueFrom:
+                fieldRef:
+                  apiVersion: v1
+                  fieldPath: spec.nodeName
           volumeMounts:
             - name: driver-path
               mountPath: {{ .Values.kubeletConfigDir }}/plugins/vxflexos.emc.dell.com
@@ -325,6 +330,8 @@ spec:
               mountPath: /dev
             - name: os-release
               mountPath: /host-os-release
+            - name: host-opt-emc-path
+              mountPath: /host_opt_emc_path
             - name: sdc-storage
               mountPath: /storage 
             - name: host-opt-emc-path