polymer-build is a library for building Polymer projects.
npm install --save-dev polymer-build
The Polymer CLI uses polymer-build under the hood, so you can think of the CLI's build command like running a pre-configured polymer-build pipeline. Setting this up for you makes the CLI easy to use, but as a command-line wrapper its customization options are more limited. polymer-build allows you to completely customize your build and combine additional streams and build tasks in any order.
Consider using polymer-build instead of the CLI if you:
- Want to customize your build(s) without using the Polymer CLI
- Need to run your source code through custom optimizers/processors before, after, or during your build
- Need to hook additional work into any part of the build process
While polymer-build was built to work easily with Gulp, it can be used in any Node.js environment. polymer-build is built on Node.js streams, and the build pipeline that you create with it is not much more than a series of connected streams. Files are represented as Vinyl file objects, which means that polymer-build can interop with any existing Gulp/Vinyl streams.
Check out the custom-build generator for an example of how polymer-build can be used to build a project.
PolymerProject represents your project in the build pipeline. Once configured, it will give you access to a collection of streams and helpers for building your project.
To create a new instance of PolymerProject, you'll need to give it some information about your application. If you already have a polymer.json configuration file in your project, you can create a new PolymerProject instance by loading it directly:
const PolymerProject = require('polymer-build').PolymerProject;
const project = new PolymerProject(require('./polymer.json'));Or, you can pass in configuration options directly to the PolymerProject constructor:
const PolymerProject = require('polymer-build').PolymerProject;
const project = new PolymerProject({
entrypoint: 'index.html',
shell: 'src/my-app.html',
fragments: [
'src/my-view1.html',
'src/my-view2.html',
'src/my-view3.html'
]
});Returns a readable stream of your project's source files. By default, these are the files in your project's src/ directory, but if you have additional source files this can be configured via the sources property in ProjectOptions.
Returns a readable stream of your project's dependencies. This stream is automatically populated based on the files loaded inside of your project. You can include additional dependencies via the extraDependencies property in ProjectOptions (this can be useful when the analyzer fails to detect a necessary dependency.)
const gulp = require('gulp');
const mergeStream = require('merge-stream');
// Create a build pipeline to pipe both streams together to the 'build/' dir
mergeStream(project.sources(), project.dependencies())
.pipe(gulp.dest('build/'));Web components will sometimes include inlined CSS & JavaScript. This can pose a problem for tools that weren't built to read those languages from inside HTML. To solve this, you can create an HtmlSplitter instance to extract inlined CSS & JavaScript into individual files in your build stream for processing (and then rejoin them later).
const gulpif = require('gulp-if');
const uglify = require('gulp-uglify');
const cssSlam = require('css-slam').gulp;
const htmlMinifier = require('gulp-html-minifier');
const HtmlSplitter = require('polymer-build').HtmlSplitter;
const sourcesHtmlSplitter = new HtmlSplitter();
const sourcesStream = project.sources()
.pipe(sourcesHtmlSplitter.split()) // split inline JS & CSS out into individual .js & .css files
.pipe(gulpif(/\.js$/, uglify()))
.pipe(gulpif(/\.css$/, cssSlam()))
.pipe(gulpif(/\.html$/, htmlMinifier()))
.pipe(sourcesHtmlSplitter.rejoin()); // rejoins those files back into their original location
// NOTE: If you want to split/rejoin your dependencies stream as well, you'll need to create a new HtmlSplitter for that stream.You can add splitters to any part of your build stream. We recommend using them to optimize your sources() and dependencies() streams individually as in the example above, but you can also optimize after merging the two together or even after bundling.
A stream that combines seperate files into code bundles based on your application's dependency graph. This can be a great way to improve performance by reducing the number of frontend requests needed.
By default, the bundler will create one "shared-bundle.html" containing all shared dependencies. You can optimize even further by defining "fragments" in your project options. Fragments are lazy loaded parts of the application, typically views and other elements loaded on-demand. When fragments are defined, the bundler is able to create smaller bundles containing code that is only required for specific fragments.
const gulp = require('gulp');
const mergeStream = require('merge-stream');
// Create a build pipeline to bundle our application before writing to the 'build/' dir
mergeStream(project.sources(), project.dependencies())
.pipe(project.bundler())
.pipe(gulp.dest('build/'));The bundler() method accepts an options object to configure bundling. See Using polymer-bundler programmatically for a detailed list of accepted options.
const {generateCountingSharedBundleUrlMapper,
generateSharedDepsMergeStrategy} = require('polymer-bundler');
mergeStream(project.sources(), project.dependencies())
.pipe(project.bundler({
excludes: ['bower_components/polymer-code-mirror'],
sourcemaps: true,
stripComments: true,
strategy: generateSharedDepsMergeStrategy(3),
urlMapper: generateCountingSharedBundleUrlMapper('shared/bundle_')
}))
.pipe(gulp.dest('build/'));generateServiceWorker() will generate the service worker code based on your build. Unlike other parts of polymer-build, generateServiceWorker() returns a promise and not a stream. It can only be run after your build has finished writing to disk, so that it is able to analyze the entire build as it exists.
For bundled builds, be sure to set the bundled option to true. See AddServiceWorkerOptions for a list of all supported options.
const generateServiceWorker = require('polymer-build').generateServiceWorker;
generateServiceWorker({
buildRoot: 'build/',
project: project,
bundled: true, // set if `project.bundler()` was used
swPrecacheConfig: {
// See https://github.com/GoogleChrome/sw-precache#options-parameter for all supported options
navigateFallback: '/index.html',
}
}).then(() => { // ...generateServiceWorker() is built on top of the sw-precache library. Any options it supports can be passed directly to that library via the swPrecacheConfig option. See sw-preache for a list of all supported options
In some cases you may need to whitelist 3rd party services with sw-precache, so the Service Worker doesn't intercept them. For instance, if you're hosting your app on Firebase, you'll want to add the navigateFallbackWhitelist: [/^(?!\/__)/] option to your swPrecacheConfig as Firebase owns the __ namespace, and intercepting it will cause things like OAuth to fail.
Like generateServiceWorker(), but writes the generated service worker to the file path you specify in the path option ("service-worker.js" by default).
const addServiceWorker = require('polymer-build').addServiceWorker;
addServiceWorker({
buildRoot: 'build/',
project: project,
}).then(() => { // ...polymer-build can automatically generate a push manifest for your application. This JSON file can be read by any HTTP/2 push-enabled web server to more easily construct the appropriate Link: <URL>; rel=preload; as=<TYPE> headers(s) for HTTP/2 push/preload. Check out http2push-gae for an example Google Apps Engine server that supports this.
The generated push manifest describes the following behavior: Requesting the shell should push any shell dependencies as well. Requesting a fragment should push any dependencies of that fragment that were not already pushed by the shell. If no shell was defined for your build, polymer-build will use the application entrypoint URL instead (default: index.html).
This method will return a transform stream that injects a new push manifest into your build (default: push-manifest.json). The push manifest is based off the application import graph, so make sure that this stream is added after all changes to the application source code.
It optionally takes a filePath argument (relative to your application root) to configure the name of the generated file.
const gulp = require('gulp');
const mergeStream = require('merge-stream');
mergeStream(project.sources(), project.dependencies())
.pipe(project.addPushManifest())
.pipe(gulp.dest('build/'));If your build pipeline outputs ES5 custom elements (either from source or by compilation with a tool like Babel), it is critical to include the Custom Elements ES5 Adapter. This adapter provides compatibility between custom elements defined as ES5-style classes and browsers with native implementations of the Custom Elements API, such as Chrome. See the adapter documentation for details of why this is necessary.
This method will return a transform stream that identifies your entrypoint HTML file (by looking for a webcomponents polyfill import) and injects a block of HTML that loads the Custom Elements ES5 Adapter. You can use this in a build pipeline to conditionally inject the adapter only when you output ES5 (as it is not needed when you output ES6).
const gulp = require('gulp');
const mergeStream = require('merge-stream');
mergeStream(project.sources(), project.dependencies())
.pipe(project.addCustomElementsEs5Adapter())
.pipe(gulp.dest('build/'));Sometimes you'll want to pipe a build to multiple destinations. forkStream() creates a new stream that copies the original stream, cloning all files that pass through it.
const gulp = require('gulp');
const mergeStream = require('merge-stream');
const forkStream = require('polymer-build').forkStream;
// Create a combined build stream of your application files
const buildStream = mergeStream(project.sources(), project.dependencies());
// Fork your build stream to write directly to the 'build/unbundled' dir
const unbundledBuildStream = forkStream(buildStream)
.pipe(gulp.dest('build/unbundled'));
// Fork your build stream to bundle your application and write to the 'build/bundled' dir
const bundledBuildStream = forkStream(buildStream)
.pipe(project.bundler())
.pipe(gulp.dest('build/bundled'));- Fork it!
- Create your feature branch:
git checkout -b my-new-feature - Commit your changes:
git commit -am 'Add some feature' - Push to the branch:
git push origin my-new-feature - Submit a pull request :D
You can compile polymer-build from source by cloning the repo and then running npm run build. Make sure you have already run npm install before compiling.
polymer-build officially supports the latest current & active LTS versions of Node.js. See our .travis.yml for the current versions of Node.js under test and visit the Polymer Tools Node.js Support Policy for more information.