VisualPHPUnit

VisualPHPUnit is a visual front-end for PHPUnit. It offers the following features:

• A stunning front-end which organizes test and suite results
• The ability to view unit testing progress via graphs
• An option to maintain a history of unit test results through the use of snapshots
• Enumeration of PHPUnit statistics and messages
• Convenient display of any debug messages written within unit tests
• Sandboxing of PHP errors
• The ability to generate test results from both a browser and the command line

Screenshots

Requirements

VisualPHPUnit requires PHP 5.3+ and PHPUnit v3.5+.

Upgrading From v1.x

VPU underwent a complete rewrite in v2.0. Users who are looking to upgrade from v1.x are encouraged to follow the installation instructions outlined below.

What About My Data?

Because the UI has been changed, snapshots from v1.x will not render correctly in v2.x.

Test statistics generated in v1.x, however, can still be used. When installing, ignore the migration and run the following commands against your old VPU database instead:

alter table SuiteResult change success succeeded int(11) not null;
alter table TestResult change success succeeded int(11) not null;

I Miss v1.x!

While no longer actively supported, v1.x can be found on its own branch.

Installation

1. Download and extract (or git clone) the project to a web-accessible directory.
2. Change the permissions of app/resource/cache to 777.
3. Open app/config/bootstrap.php with your favorite editor.
   1. Within the $config array, change pear_path so that it points to the directory where PEAR is located.
   2. Within the $config array, change test_directory so that it points to the root directory where your unit tests are stored.
4. Configure your web server (see below).

Web Server Configuration

Apache

VPU comes with .htaccess files, so you won't have to worry about configuring anything. Simply point your browser at the location where you installed the code!

Troubleshooting

1. Make sure mod_rewrite is enabled.
2. Make sure AllowOverride in your httpd.conf is set to all.
3. If you're using WAMP, you'll need to adjust the two .htaccess files to reflect the location where you extracted VPU. (In this example, VPU has been extracted to C:\wamp\www\vpu, where C:/wamp/www/ has been set as the DocumentRoot in httpd.conf.)

• In the .htaccess file located at the root of the repository, add the following line after line 2: RewriteBase /vpu
• In app/public/.htaccess, add the following line after line 2: RewriteBase /vpu/app/public

nginx

Place this code block within the http {} block in your nginx.conf file:

    server {
	    server_name     vpu;
	    root            /srv/http/vpu/app/public;
	    index           index.php;

	    access_log      /var/log/nginx/vpu_access.log;
	    error_log       /var/log/nginx/vpu_error.log;

	    location / {
            try_files $uri /index.php;
	    }

	    location ~ \.php$ {
            fastcgi_pass    unix:/var/run/php-fpm/php-fpm.sock;
            fastcgi_index   index.php;
            fastcgi_param   SCRIPT_FILENAME $document_root$fastcgi_script_name;
            include         fastcgi_params;
	    }
    }

Note that you will have to change the server_name to the name you use in your hosts file. You will also have to adjust the directories according to where you installed the code. In this configuration, /srv/http/vpu/ is the project root. The public-facing part of VisualPHPUnit, however, is located in app/public within the project root (so in this example, it's /srv/http/vpu/app/public).

When that's done, restart your web server, and then point your browser at the server name you chose above!

Project Configuration (optional)

VPU comes with many of its features disabled by default. In order to take advantage of them, you'll have to modify a few more lines in app/config/bootstrap.php.

Graph Generation

If you'd like to enable graph generation, you will have to do the following:

1. Within the $config array, change store_statistics to true. If you'd like, you can keep this set as false, though you will have to change the 'Store Statistics' option to 'Yes' on the UI if you want the test statistics to be used in graph generation.
2. Run the migration app/resource/migration/01_CreateSchema.sql against a MySQL database.
   • Note that this will automatically create a database named vpu with the tables needed to save your test statistics.
3. Within the $config array, change the settings within the db array to reflect your database settings.
   • Note that if you're using the migration described above, database should remain set to vpu.
   • The plugin directive should not be changed.

Snapshots

If you'd like to enable snapshots, you will have to do the following:

1. Within the $config array, change create_snapshots to true. If you'd like, you can keep this set as false, though you will have to change the 'Create Snapshots' option to 'Yes' on the UI if you want the test results to be saved.
2. Within the $config array, change snapshot_directory to a directory where you would like the snapshots to be saved.
   • Note that this directory must have the appropriate permissions in order to allow PHP to write to it.
   • Note that the dropdown list on the 'Archives' page will only display the files found within snapshot_directory.

Error Sandboxing

If you'd like to enable error sandboxing, you will have to do the following:

1. Within the $config array, change sandbox_errors to true. If you'd like, you can keep this set as false, though you will have to change the 'Sandbox Errors' option to 'Yes' on the UI if you want the errors encountered during the test run to be sandboxed.
2. Within the $config array, change error_reporting to reflect which errors you'd like to have sandboxed. See PHP's manual entry on error_reporting for more information.

Ignore Hidden Folders

By default, the file selector does not display hidden folders (i.e., folders with a '.' prefix). If you'd like to display hidden folders, you will have to do the following:

1. Within the $config array, change ignore_hidden_folders to false.

PHPUnit XML Configuration File

If you'd like to use a PHPUnit XML configuration file to define which tests to run, you will have to do the following:

1. Within the $config array, change xml_configuration_file to the path where the configuration file can be found.
   • Note that if you leave this set to false, but select 'Yes' for the 'Use XML Config' option on the UI, VPU will complain and run with the tests chosen in the file selector instead.
2. Modify your PHPUnit XML configuration file to include this block:

       <!-- This is required for VPU to work correctly -->
       <listeners>
         <listener class="PHPUnit_Util_Log_JSON"></listener>
       </listeners>

Bootstraps

If you'd like to load any bootstraps, you will have to do the following:

1. Within the $config array, list the paths to each of the bootstraps within the bootstraps array.

Keyboard Shortcuts

Home Page

t - Run Tests

Running VPU at the Command Line

VPU can be run at the command line, making it possible to automate the generation of test results via cron.

Configuration

The CLI script requires that the xml_configuration_file setting within the $config array of app/config/bootstrap.php be properly set. VPU will run the tests specified in the XML configuration file. Please be sure that the configuration file contains the required JSON listener.

In order to save the test results, the CLI script also requires that the snapshot_directory setting within the $config array of app/config/bootstrap.php be properly set. Note that the value of create_snapshots within the $config array has no effect on the CLI script.

Errors will be sandboxed if sandbox_errors is set to true within the $config array of app/config/bootstrap.php.

Test statistics will be stored if store_statistics is set to true within the $config array of app/config/bootstrap.php. Make sure that the database is configured correctly.

Executing

VPU can be executed from the command line using the following command:

# from the project root
bin/vpu

Version Information

Current stable release is v2.1, last updated on August 19, 2012.

Contributing

Please use the project's issue tracker to report any issues you may have.

Credits

Special thanks to Matt Mueller (http://mattmueller.me/blog/), who came up with the initial concept, wrote the original code (https://github.com/MatthewMueller/PHPUnit-Test-Report), and was kind enough to share it.

Thanks to Mike Zhou, Hang Dao, Thomas Ingham, and Fredrik Wollsén for their suggestions!