[DATALAD RUNCMD] Try python 3.12

=== Do not change lines below ===
{
 "chain": [],
 "cmd": "git sedi '\\<3\\.9\\>' 3.12",
 "dsid": "6b923cfa-a6c6-4bae-941d-e92f6afd5fcb",
 "exit": 0,
 "extra_inputs": [],
 "inputs": [],
 "outputs": [],
 "pwd": "."
}
^^^ Do not change lines above ^^^

.github/workflows/test-datalad_catalog-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_catalog-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_container-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_container-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_crawler-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_crawler-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_dataverse-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_dataverse-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_deprecated-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_deprecated-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_fuse-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_fuse-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_metalad-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_metalad-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_neuroimaging-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_neuroimaging-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_next-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_next-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_osf-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_osf-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_ukbiobank-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_ukbiobank-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_xnat-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_xnat-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

templates/.github/workflows/test-{{extension.name}}-{{datalad_branch}}.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.9
+    - name: Set up Python 3.12
       uses: actions/setup-python@v4
       with:
-        python-version: 3.9
+        python-version: 3.12
     - name: Install DataLad ({{ datalad_branch }})
       run: |
         python -m pip install --upgrade pip