[Travis] Update TravisCI from upstream

Most notable change here is the introduction of two breakpoints that will store the current cache and stop if the previous step took a long time. This is intended to avoid hitting the global time limit of 50 minutes for builds that would need to rebuild the depends cache.
cryptolinux · Jun 11, 2019 · a5f887b · a5f887b
1 parent d2136e3
commit a5f887b
Show file tree

Hide file tree

Showing 7 changed files with 133 additions and 58 deletions.
diff --git a/.travis.yml b/.travis.yml
@@ -1,13 +1,39 @@
-sudo: required
-dist: trusty
+# The test build matrix (stage: test) is constructed to test a wide range of
+# configurations, rather than a single pass/fail. This helps to catch build
+# failures and logic errors that present on platforms other than the ones the
+# author has tested.
+#
+# Some builders use the dependency-generator in `./depends`, rather than using
+# apt-get to install build dependencies. This guarantees that the tester is
+# using the same versions as Gitian, so the build results are nearly identical
+# to what would be found in a final release.
+#
+# In order to avoid rebuilding all dependencies for each build, the binaries
+# are cached and re-used when possible. Changes in the dependency-generator
+# will trigger cache-invalidation and rebuilds as necessary.
+#
+# These caches can be manually removed if necessary. This is one of the very
+# few manual operations that is possible with Travis, and it can be done by a
+# PIVX GitHub member via the Travis web interface [0].
+#
+# Travis CI uploads the cache after the script phase of the build [1].
+# However, the build is terminated without saving the chache if it takes over
+# 50 minutes [2]. Thus, if we spent too much time in early build stages, fail
+# with an error and save the cache.
+#
+# [0] https://travis-ci.org/pivx-project/pivx/caches
+# [1] https://docs.travis-ci.com/user/caching/#build-phases
+# [2] https://docs.travis-ci.com/user/customizing-the-build#build-timeouts
+
+dist: xenial
 os: linux
 language: minimal
 cache:
   ccache: true
   directories:
-  - depends/built
-  - depends/sdk-sources
-  - $HOME/.ccache
+    - depends/built
+    - depends/sdk-sources
+    - $HOME/.ccache
 stages:
   - lint
   - test
@@ -27,25 +53,28 @@ env:
     - SDK_URL=https://bitcoincore.org/depends-sources/sdks
     - WINEDEBUG=fixme-all
     - DOCKER_PACKAGES="build-essential libtool autotools-dev automake pkg-config bsdmainutils curl git ca-certificates ccache"
-
+    - CACHE_ERR_MSG="Error! Initial build successful, but not enough time remains to run later build stages and tests. Please manually re-run this job by using the travis restart button or asking a bitcoin maintainer to restart. The next run should not time out because the build cache has been saved."
 before_install:
   - set -o errexit; source .travis/test_03_before_install.sh
 install:
   - set -o errexit; source .travis/test_04_install.sh
 before_script:
   - set -o errexit; source .travis/test_05_before_script.sh
 script:
-  - set -o errexit; source .travis/test_06_script.sh
+  - export CONTINUE=1
+  - if [ $SECONDS -gt 1200 ]; then export CONTINUE=0; fi  # Likely the depends build took very long
+  - if [ $CONTINUE = "1" ]; then set -o errexit; source .travis/test_06_script_a.sh; else set +o errexit; echo "$CACHE_ERR_MSG"; false; fi
+  - if [ $SECONDS -gt 2000 ]; then export CONTINUE=0; fi  # Likely the build took very long; The tests take about 1000s, so we should abort if we have less than 50*60-1000=2000s left
+  - if [ $CONTINUE = "1" ]; then set -o errexit; source .travis/test_06_script_b.sh; else set +o errexit; echo "$CACHE_ERR_MSG"; false; fi
 after_script:
-    - echo $TRAVIS_COMMIT_RANGE
-    - echo $TRAVIS_COMMIT_LOG
-
+  - echo $TRAVIS_COMMIT_RANGE
+  - echo $TRAVIS_COMMIT_LOG
 jobs:
   include:
-# lint stage
+
     - stage: lint
+      name: 'lint'
       env:
-      sudo: false
       cache: false
       language: python
       python: '3.5' # Oldest supported version according to doc/dependencies.md
@@ -55,95 +84,126 @@ jobs:
         - set -o errexit; source .travis/lint_05_before_script.sh
       script:
         - set -o errexit; source .travis/lint_06_script.sh
-# ARM
+
     - stage: test
+      name: 'ARM 32-bit  [GOAL: install]  [no unit or functional tests]'
       env: >-
         HOST=arm-linux-gnueabihf
         PACKAGES="python3 g++-arm-linux-gnueabihf"
-        DEP_OPTS="NO_QT=1"
         RUN_UNIT_TESTS=false
         RUN_FUNCTIONAL_TESTS=false
         GOAL="install"
         # -Wno-psabi is to disable ABI warnings: "note: parameter passing for argument of type ... changed in GCC 7.1"
         # This could be removed once the ABI change warning does not show up by default
         BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports CXXFLAGS=-Wno-psabi"
-# AArch64
+
     - stage: test
+      name: 'ARM 64-bit  [GOAL:install] [no unit or functional tests]'
       env: >-
         HOST=aarch64-linux-gnu
         PACKAGES="python3 g++-aarch64-linux-gnu"
-        DEP_OPTS="NO_QT=1"
         RUN_UNIT_TESTS=false
         RUN_FUNCTIONAL_TESTS=false
         GOAL="install"
         BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
-# Win32
+
     - stage: test
+      name: 'Win32  [GOAL: deploy] [no functional tests]'
       env: >-
         HOST=i686-w64-mingw32
         DPKG_ADD_ARCH="i386"
-        DEP_OPTS="NO_QT=1"
         PACKAGES="python3 nsis g++-mingw-w64-i686 wine-binfmt wine32"
-        GOAL="install"
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="deploy"
         BITCOIN_CONFIG="--enable-reduce-exports"
-# Win64
+
     - stage: test
+      name: 'Win64  [GOAL: deploy] [no functional tests]'
       env: >-
         HOST=x86_64-w64-mingw32
-        DEP_OPTS="NO_QT=1"
         PACKAGES="python3 nsis g++-mingw-w64-x86-64 wine-binfmt wine64"
-        GOAL="install"
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="deploy"
         BITCOIN_CONFIG="--enable-reduce-exports"
-# 32-bit + dash
+
     - stage: test
+      name: '32-bit + dash  [GOAL: install] [no gui]'
       env: >-
         HOST=i686-pc-linux-gnu
         PACKAGES="g++-multilib python3-zmq"
-        DEP_OPTS="NO_QT=1"
         GOAL="install"
-        BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++"
+        BITCOIN_CONFIG="--enable-zmq --with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++"
         CONFIG_SHELL="/bin/dash"
-# x86_64 Linux (uses qt5 dev package instead of depends Qt to speed up build and avoid timeout)
+
     - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [uses qt5 dev package instead of depends Qt to speed up build and avoid timeout]'
       env: >-
         HOST=x86_64-unknown-linux-gnu
         PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools protobuf-compiler libdbus-1-dev libharfbuzz-dev libprotobuf-dev"
         DEP_OPTS="NO_QT=1 NO_UPNP=1 DEBUG=1 ALLOW_HOST_PACKAGES=1"
+        RUN_FUNCTIONAL_TESTS=true
+        #TEST_RUNNER_EXTRA="--coverage --extended"  # Run extended tests so that coverage does not fail, but exclude the very slow dbcrash
         GOAL="install"
-        BITCOIN_CONFIG="--enable-zmq --with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports CPPFLAGS=-DDEBUG_LOCKORDER"
-# x86_64 Linux (no depends, only system libs)
+        BITCOIN_CONFIG="--enable-zmq --with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports"
+
     - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [trusty]  [no functional tests, no depends, only system libs]'
+      env: >-
+        HOST=x86_64-unknown-linux-gnu
+        DOCKER_NAME_TAG=ubuntu:14.04
+        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libicu-dev libpng-dev libssl-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.1++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
+        NO_DEPENDS=1
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --with-gui=no"
+
+    - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [xenial]  [no depends, only system libs]'
+      env: >-
+        HOST=x86_64-unknown-linux-gnu
+        DOCKER_NAME_TAG=ubuntu:16.04
+        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libssl-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
+        NO_DEPENDS=1
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER --disable-hardening --disable-asm"
+
+    - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no depends, only system libs]'
       env: >-
         HOST=x86_64-unknown-linux-gnu
         PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libssl1.0-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
         NO_DEPENDS=1
         GOAL="install"
-        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --enable-glibc-back-compat --enable-reduce-exports --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER"
-# x86_64 Linux (sanitizers)
+        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER"
+
 #    - stage: test
+#      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no depends, only system libs, sanitizers: fuzzer,address]'
 #      env: >-
 #        HOST=x86_64-unknown-linux-gnu
 #        PACKAGES="clang python3-zmq qtbase5-dev qttools5-dev-tools libssl1.0-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
 #        NO_DEPENDS=1
+#        RUN_UNIT_TESTS=false
+#        RUN_FUNCTIONAL_TESTS=false
 #        RUN_BENCH=true
-#        RUN_FUNCTIONAL_TESTS=false # Disabled for now, can be combined with the other x86_64 linux NO_DEPENDS job when functional tests pass the sanitizers
 #        GOAL="install"
 #        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --enable-glibc-back-compat --enable-reduce-exports --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER --with-sanitizers=undefined CC=clang CXX=clang++"
-# x86_64 Linux, No wallet
+
 #    - stage: test
+#      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no wallet]'
 #      env: >-
 #        HOST=x86_64-unknown-linux-gnu
-#        PACKAGES="python3"
+#        PACKAGES="python3-zmq"
 #        DEP_OPTS="NO_WALLET=1"
 #        GOAL="install"
 #        BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
-# Cross-Mac
+
     - stage: test
+      name: 'macOS 10.10  [GOAL: deploy] [no functional tests]'
       env: >-
         HOST=x86_64-apple-darwin14
         PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python3-dev python3-setuptools"
         OSX_SDK=10.11
         RUN_UNIT_TESTS=false
         RUN_FUNCTIONAL_TESTS=false
-        GOAL="all deploy"
+        GOAL="deploy"
         BITCOIN_CONFIG="--enable-gui --enable-reduce-exports --enable-werror"
diff --git a/.travis/lint_04_install.sh b/.travis/lint_04_install.sh
@@ -6,4 +6,10 @@
 
 export LC_ALL=C
 
-travis_retry pip install flake8
+travis_retry pip install codespell==1.13.0
+travis_retry pip install flake8==3.5.0
+travis_retry pip install vulture==0.29
+
+SHELLCHECK_VERSION=v0.6.0
+curl -s "https://storage.googleapis.com/shellcheck/shellcheck-${SHELLCHECK_VERSION}.linux.x86_64.tar.xz" | tar --xz -xf - --directory /tmp/
+export PATH="/tmp/shellcheck-${SHELLCHECK_VERSION}:${PATH}"
diff --git a/.travis/test_03_before_install.sh b/.travis/test_03_before_install.sh
@@ -7,6 +7,8 @@
 export LC_ALL=C.UTF-8
 
 PATH=$(echo $PATH | tr ':' "\n" | sed '/\/opt\/python/d' | tr "\n" ":" | sed "s|::|:|g")
+# Add llvm-symbolizer directory to PATH. Needed to get symbolized stack traces from the sanitizers.
+PATH=$PATH:/usr/lib/llvm-6.0/bin/
 export PATH
 
 BEGIN_FOLD () {

diff --git a/.travis/test_04_install.sh b/.travis/test_04_install.sh
@@ -7,9 +7,11 @@
 export LC_ALL=C.UTF-8
 
 travis_retry docker pull "$DOCKER_NAME_TAG"
-env | grep -E '^(CCACHE_|WINEDEBUG|LC_ALL|BOOST_TEST_RANDOM|CONFIG_SHELL)' | tee /tmp/env
+env | grep -E '^(BITCOIN_CONFIG|CCACHE_|WINEDEBUG|LC_ALL|BOOST_TEST_RANDOM|CONFIG_SHELL)' | tee /tmp/env
 if [[ $HOST = *-mingw32 ]]; then
   DOCKER_ADMIN="--cap-add SYS_ADMIN"
+elif [[ $BITCOIN_CONFIG = *--with-sanitizers=*address* ]]; then # If ran with (ASan + LSan), Docker needs access to ptrace (https://github.com/google/sanitizers/issues/764)
+  DOCKER_ADMIN="--cap-add SYS_PTRACE"
 fi
 DOCKER_ID=$(docker run $DOCKER_ADMIN -idt --mount type=bind,src=$TRAVIS_BUILD_DIR,dst=$TRAVIS_BUILD_DIR --mount type=bind,src=$CCACHE_DIR,dst=$CCACHE_DIR -w $TRAVIS_BUILD_DIR --env-file /tmp/env $DOCKER_NAME_TAG)
 

diff --git a/.travis/test_06_script.sh → .travis/test_06_script_a.sh b/.travis/test_06_script.sh → .travis/test_06_script_a.sh
@@ -40,28 +40,11 @@ BEGIN_FOLD configure
 DOCKER_EXEC ./configure --cache-file=../config.cache $BITCOIN_CONFIG_ALL $BITCOIN_CONFIG || ( cat config.log && false)
 END_FOLD
 
+set -o errtrace
+trap 'DOCKER_EXEC "cat ${TRAVIS_BUILD_DIR}/sanitizer-output/* 2> /dev/null"' ERR
+
 BEGIN_FOLD build
 DOCKER_EXEC make $MAKEJOBS $GOAL || ( echo "Build failure. Verbose build follows." && DOCKER_EXEC make $GOAL V=1 ; false )
 END_FOLD
 
-if [ "$RUN_UNIT_TESTS" = "true" ]; then
-  BEGIN_FOLD unit-tests
-  DOCKER_EXEC LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib make $MAKEJOBS check VERBOSE=1
-  END_FOLD
-fi
-
-if [ "$RUN_BENCH" = "true" ]; then
-  BEGIN_FOLD bench
-  DOCKER_EXEC LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib $OUTDIR/bin/bench_pivx -scaling=0.001
-  END_FOLD
-fi
-
-if [ "$TRAVIS_EVENT_TYPE" = "cron" ]; then
-  extended="--extended --exclude feature_pruning,feature_dbcrash"
-fi
-
-if [ "$RUN_FUNCTIONAL_TESTS" = "true" ]; then
-  BEGIN_FOLD functional-tests
-  DOCKER_EXEC test/functional/test_runner.py --combinedlogslen=4000 --coverage --quiet --failfast ${extended}
-  END_FOLD
-fi
+cd ${TRAVIS_BUILD_DIR} || (echo "could not enter travis build dir $TRAVIS_BUILD_DIR"; exit 1)
diff --git a/.travis/test_06_script_b.sh b/.travis/test_06_script_b.sh
@@ -0,0 +1,21 @@
+#!/usr/bin/env bash
+#
+# Copyright (c) 2018 The Bitcoin Core developers
+# Distributed under the MIT software license, see the accompanying
+# file COPYING or http://www.opensource.org/licenses/mit-license.php.
+
+export LC_ALL=C.UTF-8
+
+cd "build/pivx-$HOST" || (echo "could not enter distdir build/pivx-$HOST"; exit 1)
+
+if [ "$RUN_UNIT_TESTS" = "true" ]; then
+  BEGIN_FOLD unit-tests
+  DOCKER_EXEC LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib make $MAKEJOBS check VERBOSE=1
+  END_FOLD
+fi
+
+if [ "$RUN_FUNCTIONAL_TESTS" = "true" ]; then
+  BEGIN_FOLD functional-tests
+  DOCKER_EXEC test/functional/test_runner.py --combinedlogslen=4000 ${TEST_RUNNER_EXTRA} --quiet
+  END_FOLD
+fi
diff --git a/src/rpc/mining.cpp b/src/rpc/mining.cpp
@@ -16,6 +16,7 @@
 #include "pow.h"
 #include "rpc/server.h"
 #include "util.h"
+#include "validationinterface.h"
 #ifdef ENABLE_WALLET
 #include "wallet/db.h"
 #include "wallet/wallet.h"