Tested and confirmed to work with DSX v2 and v3.1
🔺🔺 It is REQUIRED to install .NET8 for racingDSX to work at all!🔺🔺
Download .NET8.0 from the link here: https://dotnet.microsoft.com/en-us/download
- Go to
C:\Users\<USER>\Documents\My Games\DiRT Rally X.0\hardwaresettings
; - Open
hardware_settings_config
file with your favorite text editor; - Find for udp tag and configure as shown below:
<motion_platform> ... <udp enabled="true" extradata="3" ip="127.0.0.1" port="5300" delay="1" /> ... </motion_platform>
- enabled = true
- extradata = 3
- port = 5300
🔺🔺 Note for Forza Horizon 4 and Forza Motorsport 7 (THIS IS REQUIRED FOR IT TO WORK) 🔺🔺
- Install Window 8 AppContainer Loopback Utility
- Start the utility (if it shows a message about orphan sid, you can safely ignore it)
- Make sure that Forza Horizon 4 / Motorsport 7 are checked
- Save changes In case the above do not work for you run the below command in Powershell as admin, the command enables udp loopback without needing the utility.
Forza Horizon 4: CheckNetIsolation LoopbackExempt -a -n="Microsoft.SunriseBaseGame_8wekyb3d8bbwe"
Forza Motorsport 7: I do not have FM7 to get the ID, sorry :)
Step by step instructions for Forza Horizon 5:
- Download latest version of RacingDSX from releases https://github.com/cosmii02/RacingDSX/releases
- extract the zip file to a folder (For example desktop)
- Run RacingDSX exe
- allow firewall prompts if they show up
- Open DSX
- Run forza horizon 5
- Go to settings and enable DATA OUT and set ip to 127.0.0.1 and DATA OUT IP PORT to 5300
- In DSX make sure UDP is enabled, go to settings, click controller and then click networking. UDP has to be enabled and must be listening to port 6969
Note for Forza Motorsport 7
- Launch the game and head to the HUD options menu
- Set Data Out to ON
- Set Data Out IP Address to 127.0.0.1 (localhost)
- Set Data Out IP Port to 5300
- Set Data Out Packet Format to CAR DASH