roachtest: multitenant-upgrade failed [caused by #72425] #72420
Assignees
Labels
branch-master
Failures and bugs on the master branch.
C-test-failure
Broken test (automatically or manually discovered).
O-roachtest
O-robot
Originated from a bot.
release-blocker
Indicates a release-blocker. Use with branch-release-2x.x label to denote which branch is blocked.
Comments
cockroach-teamcity
added
branch-master
tbg
added a commit
to tbg/cockroach
that referenced
this issue
Nov 4, 2021
This would have turned the timeout in cockroachdb#72420 into a faster failure. Release note: None
tbg
changed the title
craig bot
pushed a commit
that referenced
this issue
Nov 4, 2021
72426: roachtest: add ctx timeout in multitenant-upgrade r=[erikgrinaker,stevendanna] a=tbg This would have turned the timeout in #72420 into a faster failure. Release note: None Co-authored-by: Tobias Grieger <[email protected]>
healthy-pod
pushed a commit
to healthy-pod/cockroach
that referenced
this issue
Nov 4, 2021
Merging cockroachdb#71660 introduced a bug where roachprod ignores --binary flag when running `roachprod start`. This patch reverts to the old way of setting config.Binary. Release note: None Fixes cockroachdb#72425 cockroachdb#72420 cockroachdb#72373 cockroachdb#72372
|
roachtest.multitenant-upgrade failed with artifacts on master @ 4493953f80f6e79fc461d6a9e6887d81e7ccccae: Same failure on other branches
|
craig bot
pushed a commit
that referenced
this issue
Nov 4, 2021
70330: util/log: add buffer sink decorator r=knz a=rauchenstein Previously, only the file sink had buffering, and in that case it is built into the sink. It's important to add buffering to network sinks for various reasons -- reducing network chatter, and making the networking call itself asynchronous so the log call returns with very low latency. This change adds a buffering decorator so that buffering can be added to any log sink with little or no development effort, and allowing buffering to be configured in a uniform way. Release note (cli change): Add buffering to log sinks. This can be configured with the new "buffering" field on any log sink provided via the "--log" or "--log-config-file" flags. Release justification: This change is safe because it is a no-op without a configuration change specifically enabling it. 72353: *: fix improperly wrapped errors r=otan,RaduBerinde,stevendanna a=rafiss refs #42510 I'm working on a linter that detects errors that are not wrapped correctly, and it discovered these. Release note: None 72417: sql: add unit tests for creating default privileges r=ajwerner a=RichardJCai Adding some unit test coverage so we don't hit bugs like this again. #72322 Release note: None 72430: kvserver: use wrapper type for Store.mu.replicas r=erikgrinaker a=tbg This simplifies lots of callers and it will also make it easier to work on #72374, where this map will start containing more than one type as value. Release note: None 72432: roachprod: fix `roachprod start` ignoring --binary flag r=[rail,tbg] a=healthy-pod Merging #71660 introduced a bug where roachprod ignores --binary flag when running `roachprod start`. This patch reverts to the old way of setting config.Binary as a quick solution to the bug. Release note: None Fixes #72425 #72420 #72373 #72372 Co-authored-by: Jay Rauchenstein <[email protected]> Co-authored-by: Raphael 'kena' Poss <[email protected]> Co-authored-by: Rafi Shamim <[email protected]> Co-authored-by: richardjcai <[email protected]> Co-authored-by: Richard Cai <[email protected]> Co-authored-by: Tobias Grieger <[email protected]> Co-authored-by: Ahmad Abedalqader <[email protected]>
RaduBerinde
pushed a commit
to RaduBerinde/cockroach
that referenced
this issue
Nov 15, 2021
Merging cockroachdb#71660 introduced a bug where roachprod ignores --binary flag when running `roachprod start`. This patch reverts to the old way of setting config.Binary. Release note: None Fixes cockroachdb#72425 cockroachdb#72420 cockroachdb#72373 cockroachdb#72372
craig bot
pushed a commit
that referenced
this issue
Nov 17, 2021
72641: release-21.2: roachprod: backport changes from master as of 2021-11-11 r=RaduBerinde a=RaduBerinde
This PR backports all changes involving roachprod as of 2021-11-11. There have been large refactorings which we want to backport, or it will make backporting any future necessary roachtest fixes much harder. We also want new upcoming features around multi-tenancy available for 21.2.
CC @cockroachdb/release
#### roachprod/vm/aws: improve help text for multiple stores
```bash
roachprod create ajwerner-test -n1 --clouds aws \
--aws-ebs-volume='{"VolumeType": "io2", "VolumeSize": 213, "Iops": 321}' \
--aws-ebs-volume='{"VolumeType": "io2", "VolumeSize": 213, "Iops": 321}' \
--aws-enable-multiple-stores=true
roachprod stage ajwerner-test cockroach
roachprod start ajwerner-test --store-count 2
```
The above commands will create a node with multiple stores and start cockroach
on them. Hopefully these minor help changes make that clearer.
Release note: None
#### roachprod: add stageurl command
Sometimes it is useful to be able to download these artifacts
directly. For example, when trying to bisect a problem. But, the URL
can take a second to remember the format of.
The stageurl command prints the staging URL of the given application.
I've reorganized some of the code to reduce duplication between the
stage and stageurl command. There is still more duplication than I
would like. But I figured I would see if this seems useful to others
before further refactoring.
Release note: None
#### roachprod: clean up roachprod ssh keys in aws
Many SSH keys created by roachprod are no longer used, and some were created by former employees.
This needed to change because it's a security issue that former employees may exploit.
This patch adds another step to roachprod-gc cronjob to tag any untagged keys created by roachprod in AWS and delete them if they are unused.
Release note: None
#### roachprod: upgrade Azure Ubuntu image to 20.04
Previously, currently used Ubuntu 18.04 doesn't support `systemd-run
--same-dir`, which is used by some roachprod scripts. Additionally, GCE
and AWS already use Ubuntu 20.04 based images for roachprod.
Updating the base image to Ubuntu 20.04 fixes the issue above and aligns
the version with other cloud providers.
Release note: None
#### roachprod: update azure SDK
This is a partial backport of the commit below (only the part that
affects roachprod).
metric: Add Alert and Aggregation Rule interface
In this commit, the interfaces for Alert and Aggregation rule
interfaces are outlined. These interfaces will be used
by a new endpoint which will expose these rules in a YAML
format. This endpoint can be used by our end users to
configure alerts/monitoring for CockroachDB clusters.
This commit also updates the prometheus dependency in the
vendor submodule.
Release note: None
#### roachprod: fix roachprod gc docker build
Previously, the roachprod garbage collector docker image build process
was using the `go get` approach to build roachprod.
Currently, this method doesn't work, because it doesn't use any pinning,
so the build ends up with all kind of deprecation warnings and failures.
* Use multi-stage docker build in order to separate build and runtime.
It also reduces the image size from 1.9G to 700M.
* Build roachprod using the checked out commit SHA.
* Use the Bazel build image we use in CI to build roachprod.
* Use Bazel to build roachprod.
* Added `cloudbuild.yaml` to publish the docker image to GCR and use a
beefier instance type.
* Modify the entrypoint script to set the default region, required by
the AWS Go SDK library.
* Add `push.sh` to script deployment.
Release note: None
#### roachprod: correct spelling mistakes
Release note: None
#### roachprod: install AWS CLI v2 for GC images
Previously, after regenerating the GC docker images, roachprod stopped
listing AWS as an available provider, because Debian ships with AWS CLI
v1, but roachprod doesn't support it.
This patch installs AWS CLI v2.
Release note: None
#### roachprod: making roachprod subcommands point to a new library
Previously, roachprod binary interfaced directly with roachorod's functionality
and there was no way for another tool to make use of that functionality.
This needed to change to create a library that can be used by roachprod binary
and also other tools.
This patch migrates the subcommands functionality to a new library and makes
the binary point to the new library.
Release note: None
#### roachprod: avoid flaky test due to unused functions
Merging #71660 trigerred a flaky test due to unused functions.
This patch avoids that test by making use of / commenting unused functions.
Release note: None
#### roachprod: minor cleanup for cloud.Cloud
This change fills in some missing comments from `cloud.Cloud` and
improves the interface a bit. Some of the related roachprod code is
cleaned up as well.
Release note: None
#### roachprod: clean up local cluster metadata
The logic around how the local cluster metadata is loaded and saved is
very convoluted. The local provider is using `install.Clusters` and is
writing directly to the `.hosts/local` file.
This commit disentangles this logic: it is now up to the main program
to call `local.AddCluster()` to inject local cluster information. The
main program also provides the implementation for a new
`local.VMStorage` interface, allowing the code for saving the hosts
file to live where it belongs.
Release note: None
#### roachprod: clean up local cluster deletion
This change moves the code to destroy the local cluster to the local
provider. The hosts file is deleted through LocalVMStorage.
Release note: None
#### roachprod: rework clusters cache
This commit changes roachprod from using `hosts`-style files in
`~/.roachprod/hosts` for caching clusters to using json files in
`~/.roachprod/clusters`.
Like before, each cluster has its own file. The main advantage is
that we can now store the entire cluster metadata instead of
manufacturing it based on one-off parsing.
WARNING: after this change, the information in `~/.roachprod/hosts`
will no longer be used. If a local cluster exists, the new `roachprod`
version will not know about it. It is recommended to destroy any local
cluster before using the new version. A local cluster can also be
cleaned up manually using:
```
killall -9 cockroach
rm -rf ~/.roachprod/local
```
Release note: None
#### roachprod: use cloud.Cluster in SyncedCluster
This change stores Cluster metadata directly in SyncedCluster, instead
of making copies of various fields.
#### roachprod: store ports in vm.VM
This change adds `SQLPort` and `AdminUIPort` fields to `vm.VM`. This
allows us to remove the special hardcoded values for the local
cluster.
Having these fields stored in the clusters cache will allow having
multiple local clusters, each with their own set of ports.
Release note: None
#### roachprod: support multiple local clusters
This change adds support for multiple local clusters. Local cluster
names must be either "local" or of the form "local-foo".
When the cluster is named "local", the node directories stay in the
same place, e.g. `~/local/1`. If the cluster is named "local-foo",
node directories are like `~/local/foo-1`.
For local clusters we include the cluster name in the ROACHPROD
variable; this is necessary to distinguish between processes of
different local clusters. The relevant code is cleaned up to
centralize the logic related to the ROACHPROD variable.
Fixes #71945.
Release note: None
meh
#### roachprod: list VMs in parallel
This commit speeds up the slowest step of roachprod: listing VMs from
all providers. We now list the VMs in parallel across all providers
instead of doing it serially.
Release note: None
#### roachprod: fix behavior when mixing GCE projects
Currently roachprod has very poor behavior when used with different
projects on the same host. For example:
```
shell1: GCE_PROJECT=andrei-jepsen roachstress.sh ... // this will run ~forever
sometime later in shell2: roachprod sync (on the default project)
```
The sync on the default project removes the cached information for the
cluster on `andrei-jepsen`, which causes `roachprod` commands against
that cluster (from within the `roachstress.sh` script) to fail.
We fix this by ignoring any cached clusters that reference a project
that the provider was not configured for - both when loading clusters
into memory and when deleting stale cluster files during `sync`.
As part of the change, we also improve the output of `list` to remove
the colon after the cluster name and to include the GCE project:
```
$ roachprod list --gce-project cockroach-ephemeral,andrei-jepsen
Syncing...
Refreshing DNS entries...
glenn-anarest [aws] 9 (142h41m39s)
glenn-drive [aws] 1 (141h41m39s)
jane-1635868819-01-n1cpu4 [gce:cockroach-ephemeral] 1 (10h41m39s)
lin-ana [aws] 9 (178h41m39s)
local-foo [local] 4 (-)
radu-foo [gce:andrei-jepsen] 4 (12h41m39s)
radu-test [gce:cockroach-ephemeral] 4 (12h41m39s)
```
Release note: None
#### roachprod: don't remove LOCK file
We use a LOCK file during sync. We create the file, acquire an
exclusive lock and at the end remove the file. The removal of the file
will fail if another process was waiting for the lock. Also, there is
a race where we could be deleting the file that is in use by another
process, and that would allow a third process to create the file
again.
To fix these issues, we let the LOCK file be; there is no need to
remove it - we are relying on `flock`, not on exclusive file creation.
Release note: None
#### roachprod: fix improperly wrapped errors
Partial backport of this commit:
*: fix improperly wrapped errors
I'm working on a linter that detects errors that are not wrapped
correctly, and it discovered these.
Release note: None
#### roachprod: fix `roachprod start` ignoring --binary flag
Merging #71660 introduced a bug where roachprod ignores --binary
flag when running `roachprod start`.
This patch reverts to the old way of setting config.Binary.
Release note: None
Fixes #72425 #72420 #72373 #72372
#### roachprod: update doc on local clusters
The behavior changed in
#71970.
Release note: None
#### pkg/roachprod: allow multiple-stores to be created on GCP
Port an existing flag from the AWS roachprod flags that allows multiple
stores to be created. When this flag is enabled, multiple data
directories are created and mounted as `/mnt/data{1..N}`.
Standardize the existing ext4 disk creation logic in the GCE setup
script to match the AWS functionality. Interleave the existing ZFS setup
commands based on the `--filesystem` flag.
Fix a bug introduced in #54986 that will always create multiple data
disks, ignoring the value of the flag. This has the effect of never
creating a RAID 0 array, which is the intended default behavior.
The ability to create a RAID 0 array on GCE VMs is required for the
Pebble write-throughput benchmarks.
Release note: None
#### roachprod: move quiet determination out of the library
Moving the logic of automatically enabling Quiet in non-terminal
output.
Release note: None
#### roachprod: clean up use of SyncedCluster
`SyncedCluster` is currently used to pass the cluster name (with
optional node selector) and the settings. This is a misuse of the type
and complicates things conceptually.
This change separates out the relevant settings into a new struct
`ClusterSettings`. All commands now pass the cluster name and the
`ClusterSettings` instead of passing a `SyncedCluster`.
Release note: None
Co-authored-by: Andrew Werner <[email protected]>
Co-authored-by: Steven Danna <[email protected]>
Co-authored-by: Ahmad Abedalqader <[email protected]>
Co-authored-by: Rail Aliiev <[email protected]>
Co-authored-by: rimadeodhar <[email protected]>
Co-authored-by: Radu Berinde <[email protected]>
Co-authored-by: Rafi Shamim <[email protected]>
Co-authored-by: Tobias Grieger <[email protected]>
Co-authored-by: Nick Travers <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
roachtest.multitenant-upgrade failed with artifacts on master @ 05d36621ae805e644d98ef6b35d453ae16255ccc:
Help
See: roachtest README
|
See: How To Investigate (internal)
Same failure on other branches
This test on roachdash | Improve this report!
The text was updated successfully, but these errors were encountered: