Skip to content
Ender-3V2 Build Configs

Ender-3V2 Build Configs #94

Sign in to view logs

Ender-3V2 Build Configs

Ender-3V2 Build Configs #94

Workflow file for this run

.github/workflows/compile-configs_Ender.yml at 42d5864
name: Ender-3V2 Build Configs
######################### Ender-3 #########################
on:
workflow_dispatch:
release:
types: [prereleased]
jobs:
Build-Default-E: # Default for Ender-3
name: Build Default Files E
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
echo "filename=${DTMP}Ender_GD32_Default${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/Default/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/Default/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/Default/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = GD32F303RE_creality_maple/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/GD32F303RE_creality_maple/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-MM-EX-E: # MM EX for Ender-3
name: Build MM EX Files E
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
echo "filename=${DTMP}Ender_GD32_MM-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/MM/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/MM/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/MM/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = GD32F303RE_creality_maple/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/GD32F303RE_creality_maple/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-UBL-EX-E: # UBL EX for Ender-3
name: Build UBL EX Files E
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
t13: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($T13); then TTMP=_SPRT13; else TTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender${TTMP}${MPTMP}_GD32_UBL-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = GD32F303RE_creality_maple/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
if ($T13); then THMP="13"; DSMP="424.9"; else THMP="1"; DSMP="98"; fi;
sed -i "s/^#define TEMP_SENSOR_0.*/#define TEMP_SENSOR_0 ${THMP}/" Marlin/Configuration.h
sed -i "s/.*#define DEFAULT_AXIS_STEPS_PER_UNIT.*/#define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80,400,${DSMP} }/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/GD32F303RE_creality_maple/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
T13: ${{ matrix.t13 }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-UBL-EX-T5-E: # UBL EX T5 Speedy for Ender-3
name: Build UBL EX T5 Files E
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender_SPDY5${MPTMP}_GD32_UBL-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = GD32F303RE_creality_maple/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
sed -i "s/^#define TEMP_SENSOR_0.*/#define TEMP_SENSOR_0 5/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/GD32F303RE_creality_maple/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-S1-UBL-EX-E: # UBL EX for Ender-3S1
name: Build S1 UBL EX Files E
runs-on: ubuntu-latest
strategy:
matrix:
chip: [F4,F1]
tjc: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if [ "$ENDER_VER" = F4 ]; then EVTMP="-F4"; DENV="STM32F401RC_creality"; DBORD='CREALITY_V24S1_301F4'; else EVTMP="-F1"; DENV="STM32F103RC_creality"; DBORD='CREALITY_V24S1_301'; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender-S1${EVTMP}${MPTMP}_UBL-ProUI-EX$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/S1/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/S1/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/S1/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = ${DENV}/" platformio.ini
sed -i "s/.*#define MOTHERBOARD BOARD_.*/#define MOTHERBOARD BOARD_${DBORD}/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
sed -i "s/.*#define HAS_ESDIAG 1/${MPDEMP}#define HAS_ESDIAG 1/" Marlin/Configuration.h
sed -i "s/.*#define PROUI_ITEM_PLOT/${MPDEMP}#define PROUI_ITEM_PLOT/" Marlin/Configuration.h
sed -i "s/.*#define PROUI_ITEM_TRAM/${MPDEMP}#define PROUI_ITEM_TRAM/" Marlin/Configuration.h
sed -i "s/.*#define FWRETRACT/${MPDEMP}#define FWRETRACT/" Marlin/Configuration_adv.h
pio run
mkdir temp
mv .pio/build/${DENV}/*.bin temp/build.bin
env:
ENDER_VER: ${{ matrix.chip }}
TJC: ${{ matrix.tjc }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-BLT-EX-E: # BLT EX for Ender-3
name: Build BLT EX Files E
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender${MPTMP}_GD32_BLT-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/BLT/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/BLT/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/BLT/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = GD32F303RE_creality_maple/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/GD32F303RE_creality_maple/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-Default-E4: # Default for Ender-3
name: Build Default Files E4
runs-on: ubuntu-latest
strategy:
matrix:
chip: [427,422]
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if [ "$ENDER_VER" = 427 ]; then EVTMP="427"; DBORD='CREALITY_V427'; else EVTMP="422"; DBORD='CREALITY_V422'; fi;
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
echo "filename=${DTMP}Ender_${EVTMP}_Default${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/Default/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/Default/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/Default/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F103RE_creality/" platformio.ini
sed -i "s/.*#define MOTHERBOARD BOARD_.*/#define MOTHERBOARD BOARD_${DBORD}/" Marlin/Configuration.h
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F103RE_creality/*.bin temp/build.bin
env:
ENDER_VER: ${{ matrix.chip }}
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-MM-EX-E4: # MM EX for Ender-3
name: Build MM EX Files E4
runs-on: ubuntu-latest
strategy:
matrix:
chip: [427,422]
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if [ "$ENDER_VER" = 427 ]; then EVTMP="427"; DBORD='CREALITY_V427'; else EVTMP="422"; DBORD='CREALITY_V422'; fi;
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
echo "filename=${DTMP}Ender_${EVTMP}_MM-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/MM/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/MM/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/MM/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F103RE_creality/" platformio.ini
sed -i "s/.*#define MOTHERBOARD BOARD_.*/#define MOTHERBOARD BOARD_${DBORD}/" Marlin/Configuration.h
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F103RE_creality/*.bin temp/build.bin
env:
ENDER_VER: ${{ matrix.chip }}
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-UBL-EX-E4: # UBL EX for Ender-3
name: Build UBL EX Files E4
runs-on: ubuntu-latest
strategy:
matrix:
chip: [427,422]
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
t13: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if [ "$ENDER_VER" = 427 ]; then EVTMP="427"; DBORD='CREALITY_V427'; else EVTMP="422"; DBORD='CREALITY_V422'; fi;
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($T13); then TTMP=_SPRT13; else TTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender${TTMP}${MPTMP}_${EVTMP}_UBL-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F103RE_creality/" platformio.ini
sed -i "s/.*#define MOTHERBOARD BOARD_.*/#define MOTHERBOARD BOARD_${DBORD}/" Marlin/Configuration.h
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
if ($T13); then THMP="13"; DSMP="424.9"; else THMP="1"; DSMP="98"; fi;
sed -i "s/^#define TEMP_SENSOR_0.*/#define TEMP_SENSOR_0 ${THMP}/" Marlin/Configuration.h
sed -i "s/.*#define DEFAULT_AXIS_STEPS_PER_UNIT.*/#define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80,400,${DSMP} }/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F103RE_creality/*.bin temp/build.bin
env:
ENDER_VER: ${{ matrix.chip }}
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
T13: ${{ matrix.t13 }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-UBL-EX-T5-E4: # UBL EX T5 Speedy for Ender-3
name: Build UBL EX T5 Files E4
runs-on: ubuntu-latest
strategy:
matrix:
chip: [427,422]
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if [ "$ENDER_VER" = 427 ]; then EVTMP="427"; DBORD='CREALITY_V427'; else EVTMP="422"; DBORD='CREALITY_V422'; fi;
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender_SPDY5${MPTMP}_${EVTMP}_UBL-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F103RE_creality/" platformio.ini
sed -i "s/.*#define MOTHERBOARD BOARD_.*/#define MOTHERBOARD BOARD_${DBORD}/" Marlin/Configuration.h
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
sed -i "s/^#define TEMP_SENSOR_0.*/#define TEMP_SENSOR_0 5/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F103RE_creality/*.bin temp/build.bin
env:
ENDER_VER: ${{ matrix.chip }}
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-BLT-EX-E4: # BLT EX for Ender-3
name: Build BLT EX Files E4
runs-on: ubuntu-latest
strategy:
matrix:
chip: [427,422]
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if [ "$ENDER_VER" = 427 ]; then EVTMP="427"; DBORD='CREALITY_V427'; else EVTMP="422"; DBORD='CREALITY_V422'; fi;
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender_${EVTMP}_BLT-ProUI-EX${ISTMP}${TPTMP}${MPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/BLT/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/BLT/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/BLT/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F103RE_creality/" platformio.ini
sed -i "s/.*#define MOTHERBOARD BOARD_.*/#define MOTHERBOARD BOARD_${DBORD}/" Marlin/Configuration.h
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F103RE_creality/*.bin temp/build.bin
env:
ENDER_VER: ${{ matrix.chip }}
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-UBL-EX-E3-FREE-RUNS: # UBL EX for Ender-3 E3 Free-runs
name: Build UBL EX E3 Free-runs Files
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
t13: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($T13); then TTMP=_SPRT13; else TTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender_E3-Free-runs${TTMP}${MPTMP}_UBL-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/E3-Free-runs/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/E3-Free-runs/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/E3-Free-runs/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F401RE_freeruns/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
if ($T13); then THMP="13"; DSMP="424.9"; else THMP="1"; DSMP="98"; fi;
sed -i "s/^#define TEMP_SENSOR_0.*/#define TEMP_SENSOR_0 ${THMP}/" Marlin/Configuration.h
sed -i "s/.*#define DEFAULT_AXIS_STEPS_PER_UNIT.*/#define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80,400,${DSMP} }/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F401RE_freeruns/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
T13: ${{ matrix.t13 }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-UBL-EX-T5-E3-FREE-RUNS: # UBL EX T5 Speedy for Ender-3 E3 Free-runs
name: Build UBL EX T5 E3 Free-runs Files
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
bmp: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
if ($BMP); then MPTMP=_BMP; else MPTMP=; fi;
echo "filename=${DTMP}Ender_E3-Free-runs_SPDY5${MPTMP}_UBL-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/E3-Free-runs/UBL/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/E3-Free-runs/UBL/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/E3-Free-runs/UBL/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F401RE_freeruns/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
sed -i "s/^#define TEMP_SENSOR_0.*/#define TEMP_SENSOR_0 5/" Marlin/Configuration.h
if ($BMP); then MPDEMP=; MPEMP='\/\/'; MPHS="LOW"; else MPDEMP='\/\/'; MPEMP=; MPHS="HIGH"; fi;
sed -i "s/.*#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/${MPDEMP}#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_ENDSTOP_HIT_STATE.*/#define Z_MIN_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define Z_MIN_PROBE_ENDSTOP_HIT_STATE.*/#define Z_MIN_PROBE_ENDSTOP_HIT_STATE ${MPHS}/" Marlin/Configuration.h
sed -i "s/.*#define BLTOUCH/${MPEMP}#define BLTOUCH/" Marlin/Configuration.h
sed -i "s/.*#define BIQU_MICROPROBE_V2/${MPDEMP}#define BIQU_MICROPROBE_V2/" Marlin/Configuration.h
sed -i "s/.*#define PROBE_ENABLE_DISABLE/${MPDEMP}#define PROBE_ENABLE_DISABLE/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F401RE_freeruns/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
BMP: ${{ matrix.bmp }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary
Build-MM-EX-E3-FREE-RUNS: # MM EX for Ender-3 E3 Free-runs
name: Build MM EX E3 Free-runs Files
runs-on: ubuntu-latest
strategy:
matrix:
temp: [true,false]
inshape: [true,false]
tjc: [true,false]
steps:
- uses: actions/[email protected]
- name: Setup node
uses: actions/[email protected]
with:
node-version: 20
- name: Cache pip
uses: actions/[email protected]
with:
path: ~/.cache/pip
key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
restore-keys: |
${{ runner.os }}-pip-
- name: Cache PlatformIO
uses: actions/[email protected]
with:
path: ~/.platformio
key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
- name: Set up Python
uses: actions/[email protected]
with:
python-version: '3.11'
- name: Install PlatformIO
run: |
python3 -m pip install --upgrade pip wheel platformio
- name: Run PlatformIO
id: build_configs
run: |
if ($TP); then TPTMP=-MPC; else TPTMP=; fi;
if ($IS); then ISTMP=-IS; else ISTMP=; fi;
if ($TJC); then DTMP=TJC-; else DTMP=; fi;
echo "filename=${DTMP}Ender_E3-Free-runs_MM-ProUI-EX${ISTMP}${TPTMP}$(date +"-%m-%d").bin" >> $GITHUB_OUTPUT
> Marlin/Configuration.h
> Marlin/Configuration_adv.h
> Marlin/Version.h
cp configurations/Creality\ Ender/E3-Free-runs/MM/Configuration.h Marlin/Configuration.h
cp configurations/Creality\ Ender/E3-Free-runs/MM/Configuration_adv.h Marlin/Configuration_adv.h
cp configurations/Creality\ Ender/E3-Free-runs/MM/Version.h Marlin/Version.h
sed -i "s/default_envs =.*/default_envs = STM32F401RE_freeruns/" platformio.ini
if ($IS); then STEMP=; else STEMP='\/\/'; fi;
sed -i "s/.*#define INPUT_SHAPING_X/${STEMP}#define INPUT_SHAPING_X/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Y/${STEMP}#define INPUT_SHAPING_Y/" Marlin/Configuration_adv.h
sed -i "s/.*#define INPUT_SHAPING_Z/${STEMP}#define INPUT_SHAPING_Z/" Marlin/Configuration_adv.h
if ($TP); then PTEMP='\/\/'; MTEMP=; else PTEMP=; MTEMP='\/\/'; fi;
sed -i "0,/^#define PIDTEMP/ s/.*#define PIDTEMP/${PTEMP}#define PIDTEMP/" Marlin/Configuration.h
sed -i "s/.*#define MPCTEMP/${MTEMP}#define MPCTEMP/" Marlin/Configuration.h
if ($TJC); then TJEMP=; else TJEMP='\/\/'; fi;
sed -i "s/.*#define TJC_DISPLAY/${TJEMP}#define TJC_DISPLAY/" Marlin/Configuration.h
pio run
mkdir temp
mv .pio/build/STM32F401RE_freeruns/*.bin temp/build.bin
env:
TP: ${{ matrix.temp }}
IS: ${{ matrix.inshape }}
TJC: ${{ matrix.tjc }}
- name: Get release
id: get_release
uses: bruceadams/[email protected]
env:
GITHUB_TOKEN: ${{ github.token }}
- name: Upload Release Asset
uses: classicrocker883/[email protected]
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
with:
upload_url: ${{ steps.get_release.outputs.upload_url }}
asset_path: temp/build.bin
asset_name: ${{ steps.build_configs.outputs.filename }}
asset_content_type: application/x-binary