This repository contains the RTL and cell models for the AIB interface. See the AIB Spec for the AIB Specification.
September 26, 2022
AIB 1.0 Users (Spec rev 1.2) should go to Version 1.0 v1.0/rev2.
AIB 2.0 Users (Spec rev 2.0.3) should go to Version 2.0 v2.0.
The rev1 open source AIB release is the same as the original moved from https://github.com/intel/aib-phy-hardware.
The rev1 directory structure is:
├── aib_lib
├── docs
├── how2use
├── maib_rtl
├── ndsimslv
See README.txt under rev1 and subdirectories for detail.
New users should start with rev1 for quickest ramp up.
Rev2 has multi-die AIB instances and test benches.
Main directory structure is below. Read the README.txt files in the subdirectories for details.
├── docs
│ └── archive
└── rev2 -- Multi-die AIBs design (for advanced user reference)
├── dv -- System Verilog DV to be released in the future.
│ ├── flist -- File lists for multi-die AIB IPs.
│ ├── sims -- Compilation directory. VCS is supported for now.
└── rtl -- For the detail of the rtl release, see README.txt in this directory
├── v1_master
├── v1_slave
├── v2_common
├── v2_master
└── v2_slave
v1.0/rev2/rtl/v1_slave 24 channel S10 MAIB Plus AUX (AUX only uses four pins) Use this for interop simulations with Stratix 10.
v2.0/rev1 is a behavioral model of AIB 2.0. v2.0/rev1.1 is RTL extracted from an actual AIB 2.0 design. Functionally rev1 and rev1.1 are intended to be equivalent. rev1 simulates a lot faster than rev1.1, so some people prefer to use rev1. For a tapeout, a user should run rev1.1 for final verification.
AIB 2.0 behavior RTL based on AIB spec 2.0.
Main directory structure is below. Read the README.txt files in the subdirectories for details.
├── docs
│ └── archive
├── v1.0
│ ├── rev1 -- Previous rev1
│ │ ├── aib_lib
│ │ ├── how2use
│ │ ├── maib_rtl
│ │ ├── ndsimslv
│ │ └── rtl
│ └── rev2 -- Previous rev2 as above
│ ├── constraints
│ ├── dv
│ └── rtl
└── v2.0
├── rev1 -- AIB model for AIB 2.0 Specification
│ ├── dv -- System Verilog Verification Suite
│ └── rtl -- Behavior RTL model
├── rev1.1 -- MAIB 1.1
├── dv
└── rtl -- MAIB 1.1 model
v2.0/rev1.1/rtl/maib_rev1.1 24 channel Agilex with no AUX. The device_detect and power_on_reset signals go through a microbumped AUX channel on Agilex just like Stratix 10. This model presents a MAIB MAC interface to FPGA soft IP, just like Quartus will provide. The AUX connection of device_detect and power_on-reset is in the testbench.