Ansible Role: Multipath (DM Multipath)

A fine ansible role which deploy and setup linux native multipathing software (DM Multipath) properly for Boot from SAN or Local Boot scenarios.

This multipath ansible role is able to:

configure DM Multipath according to product documentation and industry best practices
configure driver parameters

Warning

This role replaces the DM Multipath configuration
Previous settings will be overwrite, check multipath_backup_permanent in Role Variables section.

This configuration affects the following directory and configuration files:

/etc/multipath/
/etc/multipath.conf

If something is wrong after reboot the managed host, some errors in initramfs can leads to Kernel panic on boot following "dracut Warning: LVM rootvg/rootlv not found"

In this case, I recommend:

reboot the system using a Rescue ISO Image
revert back main files:
- /boot/<original-initramfs>.img.ansible_multipath
- /etc/fstab.ansible_multipath
- /etc/lvm/lvm.conf.ansible_multipath

NOTE: there are many ways to revert your system to operational state, kernel boot parameters as rdshell or rd.shell plus removing rhgb and quiet can help you to troubleshoot your broken initramfs.

How it works?

There are two main stages: pre-setup and setup.

In pre-setup stage this role does (no system changes, except for package installation if declared):

check if device-mapper-multipath package is installed (you can install or upgrade it. See variables)
get properties of device for /boot mounted filesystem, also for /boot/efi
get properties and discover the real disk device for /boot mounted filesystem
load modprobe drivers according vendor and model from discovered real boot disk device
autoselect the type of configuration (Boot from SAN?) based on boot disk device driver
get GRUB's default kernel and initramfs
load verifications for Boot from SAN or Local Boot scenarios
defines pseudo name for real disk device
defines LVM filter

In setup stage this role does (system changes):

backup some system files, such as /etc/fstab, current initramfs, and /etc/lvm/lvm.conf
removes current DM Multipath configuration files
create an initial /etc/multipath.conf file
setup /etc/multipath.conf file and check for syntax or errors
setup /etc/fstab
setup LVM filter and check for syntax or errors
setup modprobe files and check for syntax or errors
setup initramfs and check for errors
in case of errors, it removes extra files and rollback system files using previous backup
reboot the system
removes previous backup system files

Requirements

Playbook must run with become: yes or equivalent root privilege and gather_facts: yes as well.

Ansible Engine 2.7.1+

Role Variables

The multipath role is configured over variables starting with multipath_ as the name prefix.

List of variables:

Variable	Type	Description
`multipath_setup_pseudodevname`	string (m) *	Define pseudo device name (alias) for boot disk managed by DM Multipath
`multipath_package_install`	boolean (o)	Install the device-mapper-multipath package if not present
`multipath_package_upgrade`	boolean (r)	Upgrade (also install) device-mapper-multipath package
`multipath_preserve_currentfiles`	boolean (r)	Before setup stage, make a permanent copy of current DM Multipath configuration files
`multipath_reboot_allow`	boolean (r)	Allow this role to reboot the managed node
`multipath_reboot_timeoutguest`	integer (o)	Max time (secs) for 'reboot' waiting a managed Guest system to becomes online again
`multipath_reboot_timeoutbaremetal`	integer (o)	Max time (secs) for 'reboot' waiting a managed Bare Metal system to becomes online again
`multipath_modprobe_custom`	list (o)	Load and define drivers parameters related to boot device disk vendor or model
`multipath_configfile_commentlines`	boolean (o) *	Comment all lines in /etc/multipath.conf
`multipath_configfile_bybasic`	boolean (o) *	Overwrites /etc/multipath.conf file using a basic and functional configuration
`multipath_configfile_bytemplate`	boolean (o)	Overwrites /etc/multipath.conf file using predefined role templates
`multipath_configfile_byusertemplate`	string (o)	Overwrites /etc/multipath.conf file using a custom user template file
`multipath_configfile_bysections`	string (o)	Include custom sections in /etc/multipath.conf file
`multipath_configfile_defaults`	list (o)	Include extra parameters in "defaults {" section for /etc/multipath.conf
`multipath_debug_sysfilecontent`	boolean (o)	Before post-setup tasks (e.g. reboot), show content of modified system files
`multipath_debug_showvariables`	boolean (r)	Show role variables and their values

(m) - mandatory
(r) - recommended
(o) - optional
* - default value is applied ( see defaults/main.yml )

Explained list of variables:

multipath_setup_pseudodevname: define pseudo device name (alias) for boot disk managed by DM Multipath (e.g. /dev/mapper/bootLUN)

type: string

affected files:
- /etc/fstab
- /etc/multipath.conf
example:
```
multipath_setup_pseudodevname: bootLUN
```
NOTE: do not use "p" or numeric characteres

multipath_package_install: install the device-mapper-multipath package if not present

type: boolean

affected files: n/a

example:
```
multipath_package_install: yes
```

multipath_package_upgrade: upgrade (also install) the device-mapper-multipath package

type: boolean

affected files: n/a

example:
```
multipath_package_upgrade: yes
```

multipath_preserve_currentfiles: before setup stage, make a permanent copy of current DM Multipath configuration files, such as /etc/multipath.conf and /etc/multipath/

type: boolean

affected files: n/a

example:
```
multipath_preserve_currentfiles: yes
```
NOTE: preserved files will be stored as /etc/multipath.conf.ansible_multipath and /etc/multipath.ansible_multipath/, once these files are copied the role will never touch them again, for directory it acts as append mode.

multipath_reboot_allow: allow this role to reboot the managed node

type: boolean

affected files: n/a

example:
```
multipath_reboot_allow: yes
```

multipath_reboot_timeoutguest: max time (secs) for 'reboot' waiting a managed Guest system to becomes online again

type: integer

affected files: n/a

example:
```
multipath_reboot_timeoutguest: 300
```

multipath_reboot_timeoutbaremetal: max time (secs) for 'reboot' waiting a managed Bare Metal system to becomes online again

type: integer

affected files: n/a

example:
```
multipath_reboot_timeoutbaremetal: 1800
```

multipath_modprobe_custom: load and define drivers parameters related to boot device disk vendor or model, generating a modprobe file according to module name. - please refer your connectivity guide about Enterprise Storage Array vendor

type: list

affected files:

/etc/modprobe.d/<module-name>.conf

example:

multipath_modprobe_custom:
  - module: lpfc
    params: lpfc_max_luns=65535 lpfc_devloss_tmo=10
    vendor: EMC
    model: any
  - module: lpfc
    params: lpfc_max_luns=65535 lpfc_devloss_tmo=14 lpfc_lun_queue_depth=16 lpfc_discovery_threads=32
    vendor: 3PARdata
    model: VV
  - module: qla2xxx
    params: ql2xmaxlun=65535 qlport_down_retry=14 ql2xmaxqdepth=16
    vendor: 3PARdata
    model: VV
  - module: scsi_transport_fc
    params: dev_loss_tmo=10
    vendor: any
    model: any

NOTE: using "any" value will adjust driver parameters without matching/validates boot disk device driver, you can obtain a full device list through multipath -t

multipath_configfile_commentlines: comment all lines in /etc/multipath.conf after mpathconf tool creates an initial configuration file

type: boolean

affected files:
- /etc/multipath.conf
example:
```
multipath_configfile_commentlines: yes
```

multipath_configfile_bybasic: overwrites /etc/multipath.conf file using a basic and functional configuration (original file comments are not preserved)

type: boolean

affected files:
- /etc/multipath.conf
dependencies:
- multipath_configfile_commentlines: yes
example:
```
multipath_configfile_bybasic: yes
```

multipath_configfile_bytemplate: overwrites /etc/multipath.conf file using predefined role templates (e.g. templates/bootfromsan_multipath.conf.j2) with basic functional configuration (original file comments are preserved)

type: boolean

affected files:
- /etc/multipath.conf
example:
```
multipath_configfile_bytemplate: yes
```

multipath_configfile_byusertemplate: overwrites /etc/multipath.conf file using a custom user template file, the file must be at playbook directory level or 'templates' as well, likewise you can use role facts, see 'templates/bootfromsan_multipath.conf.j2' file

type: string (file-path)

affected files:
- /etc/multipath.conf
example:
```
multipath_configfile_byusertemplate: mymultipath.conf.j2
```

multipath_configfile_bysections: include custom sections in /etc/multipath.conf file

type: string (multi-line)

affected files:

/etc/multipath.conf

example:

multipath_configfile_bysections: |

  devices {
          device {
                  vendor                   "COMPAQ  "
                  product                  "HSV110 (C)COMPAQ"
                  path_grouping_policy     multibus
                  path_checker             readsector0
                  path_selector            "round-robin 0"
                  hardware_handler         "0"
                  failback                 15
                  rr_weight                priorities
                  no_path_retry            queue
          }
  }

NOTE: optional combined with multipath_configfile_commentlines: yes

multipath_configfile_defaults: include extra parameters in "defaults {" section for /etc/multipath.conf

type: list

affected files:
- /etc/multipath.conf
example:
```
multipath_configfile_defaults:
  - detect_prio no
  - failback "manual"
  - max_fds 1048576
  - max_polling_interval 20
```

multipath_debug_sysfilecontent: before post-setup tasks (e.g. reboot), show content of modified system files in playbook stream like a task, files: /etc/fstab, /etc/lvm/lvm.conf and /etc/multipath.conf

type: boolean

affected files: n/a

example:
```
multipath_debug_sysfilecontent: yes
```

multipath_debug_showvariables: show role variables and their values

type: boolean

affected files: n/a

example:
```
multipath_debug_showvariables: yes
```

Dependencies

N/A

Example Playbook

A basic playbook should be like this:

- hosts: servers
  become: yes
  gather_facts: yes

  roles:
    - cdomingos.multipath

List of example playbooks can be found at tests/ in role directory structure.

License

MIT

Author Information

This role was created in 2019 by Cláudio Domingos

Additional Information

Tested on:

HP ProLiant BL460c Gen9 (UEFI)
3PAR Storage Array
HP ProLiant BL460c G7
VMAX Storage Array
RHEL 8
RHEL 7
RHEL 6
Fedora 31

It is very appropriate to use this role for Bare Metal machines, guests does not make sense because high availability multipathing software must be at hypervisor level.

Do you want to apply DM Multipath best practices configuration using an specific Storage Array? Engage your Storage Array vendor, also you can searching for Host Connectivity Guide for Linux and check what your Storage Array vendor recommends for.

This role is inspired from:

TODO

Solve critical issue like dracut Warning: LVM rootvg/rootlv not found

a. Implementing a script to rollback at initramfs/dracut boot stage when system crash during reboot cycle
b. Enable network and sshd service at initramfs/dracut boot stage and perform necessary rescue tasks to fix it using Ansible

Name		Name	Last commit message	Last commit date
Latest commit History 3 Commits
defaults		defaults
meta		meta
tasks		tasks
templates		templates
tests		tests
vars		vars
.ansible-lint		.ansible-lint
LICENSE		LICENSE
README.md		README.md
knowissues.md		knowissues.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Ansible Role: Multipath (DM Multipath)

Warning

How it works?

Requirements

Role Variables

Dependencies

Tags

Example Playbook

License

Author Information

Additional Information

TODO

About

Releases

Packages

License

cdomingos/ansible-role-multipath

Folders and files

Latest commit

History

Repository files navigation

Ansible Role: Multipath (DM Multipath)

Warning

How it works?

Requirements

Role Variables

Dependencies

Tags

Example Playbook

License

Author Information

Additional Information

TODO

About

Topics

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Packages