Advance setting Watt offset

[Barnello83]

Hi,

it would be great if the app permits to put positive offset in Advance setting “watt offset”.

This in order to compare stryd wattage indoor whit outdoor.

Thank you in advice

Federico

[cagnulein]

sure i will do tomorrow;) Il giorno mer 18 ott 2023 alle 20:53 Barnello83 ***@***.***> ha scritto:

…

Hi, it would be great if the app permits to put positive offset in Advance setting “watt offset”. This in order to compare stryd wattage indoor whit outdoor. Thank you in advice Federico — Reply to this email directly, view it on GitHub <#1714>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWF42MXP6533BDOSGMLYAAQT7AVCNFSM6AAAAAA6F7VT4SVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZVG42TAOBXGQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[cagnulein]

done @Barnello83 I will send you a new version later today!

[Barnello83]

Great @cagnulein!!

Thank you!!

[cagnulein]

version sent! let me know! Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno gio 19 ott 2023 alle ore 08:47 Barnello83 < ***@***.***> ha scritto:

…

Great @cagnulein <https://github.com/cagnulein>!! Thank you!! — Reply to this email directly, view it on GitHub <#1714 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWFMOFVBWOJFRKA7R6TYADEI3AVCNFSM6AAAAAA6F7VT4SVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TGMRTGAZDQ> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

[Barnello83]

Hi,

debug log of yesterday activity and this morning activity.

debug-Tue_Oct_24_22_11_10_2023.log

debug-Wed_Oct_25_06_49_47_2023.zip

[cagnulein]

hi @Barnello83 the problem here is that you set the watt gain to 0. It must always be a value different than 0 otherwise the resulted watt will be always 0 (watt = raw_wattage * gain). So please set it to 1 and se the watt offset to 40
Let me know

[Barnello83]

Hi @cagnulein thank you very much!!

I have done a mess🤣!!!

I’ll update you as soon as possible!!

[Barnello83]

Hi @cagnulein perfect!!

It’s my fault, everything works fine!!

Thank you

[Barnello83]

Hi @cagnulein
I would like to ask you if it’s possible to use floating number to speed offset.

I have tried, but I can use only integers.

Thank you

Federico

[cagnulein]

i checked and it's already a float. You just need to copy and paste the float value from another app.

for example write 10.7 in an app, copy the value and paste it in the speed offset setting in qz and press ok.
I also already fixed the fact that you can't input it directly.
let me know

[Barnello83]

With copy and paste it works.
Directly from the app I continue to not have the possibility to insert. I can see only the pad without the point.
Have I to re-download the app?In TestFlight I see the same version that I have already installed

[cagnulein]

Great!
No I just did the modification in the code, I will upload it later :)

[cagnulein]

sure i will do this Il giorno sab 9 dic 2023 alle 16:39 Barnello83 ***@***.***> ha scritto:

…

Hi @cagnulein <https://github.com/cagnulein> I would like to ask you if it’s possible to use floating number to speed offset. I have tried, but I can use only integers. Thank you Federico — Reply to this email directly, view it on GitHub <#1714 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWHZYMVTXDZEER3PNODYISA2NAVCNFSM6AAAAAA6F7VT4SVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TQMBXGU4TS> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

[Barnello83]

@cagnulein
I have another question:
is possible to set the power zone using 5 zones (like stryd) instead of 7?
Is also possible, like the hearth rate, to set the zone using custom percentage?

thank’s in advice

Federico

[cagnulein]

heart zone are customizable in the settings power zones are doing in this way to stay aligned to peloton. i would like to keep as they are for now Il giorno dom 10 dic 2023 alle 16:14 Barnello83 ***@***.***> ha scritto:

…

@cagnulein <https://github.com/cagnulein> I have another question: is possible to set the power zone using 5 zones (like stryd) instead of 7? Is also possible, like the hearth rate, to set the zone using custom percentage? thank’s in advice Federico — Reply to this email directly, view it on GitHub <#1714 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWAHUSRL3DFM2ZXAYXTYIXGWTAVCNFSM6AAAAAA6F7VT4SVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TQMJSGA3DI> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>