SIM7070G AT+SHCONN problem

[sweidling]

Hi again,

I have noticed that after some time (3-4 weeks of operation) problems with AT+SHCONN (connection to web server via HTTPS) occur with the SIM7070G module. Other protocols like NTP will still work.
A reset via AT command or PWR_PIN does not solve the problem. The module must be disconnected from the power.
I have this problem with several modules. It doesn't seem to be an isolated case.

Has anyone else encountered this problem?

Thanks :)

[Mark-Wills]

Is it a problem with clock drift? Are you setting the time/date correctly on the modem? I saw something about that a couple of weeks ago -

…

On Fri, Dec 16, 2022 at 3:47 PM sweidling ***@***.***> wrote: Hi again, I have noticed that after some time (3-4 weeks of operation) problems with AT+SHCONN (connection to web server via HTTPS) occur with the SIM7070G module. Other protocols like NTP will still work. A reset via AT command or PWR_PIN does not solve the problem. The module must be disconnected from the power. I have this problem with several modules. It doesn't seem to be an isolated case. Has anyone else encountered this problem? Thanks :) — Reply to this email directly, view it on GitHub <#320>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFAGDCS5F2YCJPWNE6SUKJTWNSFJFANCNFSM6AAAAAATBEBEYI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>