Add Makefile for automating localnet setup

.editorconfig

@@ -9,6 +9,9 @@ charset = utf-8
 trim_trailing_whitespace = true
 insert_final_newline = true
 
+[Makefile]
+indent_style = tab
+
 [*.bat]
 end_of_line = crlf
 

.gitignore

@@ -32,3 +32,4 @@ deploy
 /monitor/TorHiddenServiceStartupTimeTests/*
 /monitor/monitor-tor/*
 .java-version
+.localnet

Makefile

@@ -0,0 +1,264 @@
+#
+# INTRODUCTION
+#
+# This makefile is designed to help Bisq contributors get up and running
+# as quickly as possible with a local regtest Bisq network deployment,
+# or 'localnet' for short. A localnet is a complete and self-contained
+# "mini Bisq network" suitable for development and end-to-end testing
+# efforts.
+#
+#
+# REQUIREMENTS
+#
+# You'll need the following to proceed:
+#
+#  - Linux, macOS or similar *nix with standard tools like `make`
+#  - bitcoind and bitcoin-cli (`brew install bitcoin` on macOS)
+#  - JDK 10 to build and run Bisq binaries; see
+#    https://www.oracle.com/java/technologies/java-archive-javase10-downloads.html
+#
+#
+# USAGE
+#
+# The following commands (and a couple manual instructions) will get
+# your localnet up and running quickly.
+#
+# STEP 1: Build all Bisq binaries and set up localnet resources. This
+# will take a few minutes the first time through.
+#
+#     $ make
+#
+# Notes:
+#
+#  - When complete, you'll have a number of scripts available in the
+#  root directory. They will be used in the make targets below to start
+#  the various Bisq seed and desktop nodes that will make up your
+#  localnet:
+#
+#     $ ls -1 bisq-*
+#     bisq-desktop
+#     bisq-monitor
+#     bisq-pricenode
+#     bisq-relay
+#     bisq-seednode
+#     bisq-statsnode
+#
+#  - You will see a new '.localnet' directory containing the data dirs
+#  for your regtest Bitcoin and Bisq nodes. Once you've deployed them in
+#  the step below, the directory will look as follows:
+#
+#     $ tree -d -L 1 .localnet
+#     .localnet
+#     ├── alice
+#     ├── bitcoind
+#     ├── bob
+#     ├── mediator
+#     ├── seednode
+#     └── seednode2
+#
+# STEP 2: Deploy the Bitcoin and Bisq nodes that make up the localnet.
+# Run each of the following in a SEPARATE TERMINAL WINDOW, as they are
+# long-running processes.
+#
+#     $ make bitcoind
+#     $ make seednode
+#     $ make seednode2
+#     $ make mediator
+#     $ make alice
+#     $ make bob
+#
+#  Tip: Those familiar with the `screen` terminal multiplexer can
+#  automate the above by running the `deploy` target found below.
+#
+#  Notes:
+#
+#    - The 'seednode' targets launch headless Bisq nodes that help
+#    desktop nodes discover other peers, as well as storing and
+#    forwarding p2p network messages for nodes as they go on and
+#    offline.
+#
+#    - As you run the 'mediator', 'alice' and 'bob' targets above,
+#    you'll see a Bisq desktop node window appear for each. The Alice
+#    and Bob instances represent two traders who can make and take
+#    offers with one another. The Mediator instance represents a Bisq
+#    contributor who can help resolve any technical problems or disputes
+#    that come up between the two traders.
+#
+# STEP 3: Configure the mediator Bisq node. In order to make and take
+# offers, Alice and Bob will need to have a mediator and a refund agent
+# registered on the network. Follow the instructions below to complete
+# that process:
+#
+#  a) Go to the Account screen in the Mediator instance and press CMD+N
+#  and a popup will appear. Click 'Unlock' and then click 'Register' to
+#  register the instance as a mediator.
+#
+#  b) While still in the Account screen, press CMD+D and follow the same
+#  steps as above to register the instance as a refund agent.
+#
+# When the steps above are complete, your localnet should be up and
+# ready to use. You can now test in isolation all Bisq features and use
+# cases.
+#
+
+# Set up everything necessary for deploying your localnet. This is the
+# default target.
+setup: build .localnet
+
+clean: clean-build clean-localnet
+
+clean-build:
+	./gradlew clean
+
+clean-localnet:
+	rm -rf .localnet ./dao-setup
+
+# Build Bisq binaries and shell scripts used in the targets below
+build: seednode/build desktop/build
+
+seednode/build:
+	./gradlew :seednode:build
+
+desktop/build:
+	./gradlew :desktop:build
+
+# Unpack and customize a Bitcoin regtest node and Alice and Bob Bisq
+# nodes that have been preconfigured with a blockchain containing the
+# BSQ genesis transaction
+.localnet:
+	# Unpack the old dao-setup.zip and move things around for more
+	# concise and intuitive naming. This is a temporary measure until we
+	# clean these resources up more thoroughly.
+	unzip docs/dao-setup.zip
+	mv dao-setup .localnet
+	mv .localnet/Bitcoin-regtest .localnet/bitcoind
+	mv .localnet/bisq-BTC_REGTEST_Alice_dao .localnet/alice
+	mv .localnet/bisq-BTC_REGTEST_Bob_dao .localnet/bob
+	# Remove the preconfigured bitcoin.conf in favor of explicitly
+	# parameterizing the invocation of bitcoind in the target below
+	rm -v .localnet/bitcoind/bitcoin.conf
+	# Avoid spurious 'runCommand' errors in the bitcoind log when nc
+	# fails to bind to one of the listed block notification ports
+	echo exit 0 >> .localnet/bitcoind/blocknotify
+
+# Alias '.localnet' to 'localnet' so the target is discoverable in tab
+# completion
+localnet: .localnet
+
+# Deploy a complete localnet by running all required Bitcoin and Bisq
+# nodes, each in their own named screen window. If you are not a screen
+# user, you'll need to manually run each of the targets listed below
+# commands manually in a separate terminal or as background jobs.
+deploy: setup
+	# create a new screen session named 'localnet'
+	screen -dmS localnet
+	# deploy each node in its own named screen window
+	for target in \
+			bitcoind \
+			seednode \
+			seednode2 \
+			alice \
+			bob \
+			mediator; do \
+		screen -S localnet -X screen -t $$target; \
+		screen -S localnet -p $$target -X stuff "make $$target\n"; \
+	done;
+	# give bitcoind rpc server time to start
+	sleep 5
+	# generate a block to ensure Bisq nodes get dao-synced
+	make block
+
+# Undeploy a running localnet by killing all Bitcoin and Bisq
+# node processes, then killing the localnet screen session altogether
+undeploy:
+	# kill all Bitcoind and Bisq nodes running in screen windows
+	screen -S localnet -X at "#" stuff "^C"
+	# quit all screen windows which results in killing the session
+	screen -S localnet -X at "#" kill
+
+bitcoind: .localnet
+	bitcoind \
+		-regtest \
+		-prune=0 \
+		-txindex=1 \
+		-peerbloomfilters=1 \
+		-server \
+		-rpcuser=bisqdao \
+		-rpcpassword=bsq \
+		-datadir=.localnet/bitcoind \
+		-blocknotify='.localnet/bitcoind/blocknotify %s'
+
+seednode: seednode/build
+	./bisq-seednode \
+		--baseCurrencyNetwork=BTC_REGTEST \
+		--useLocalhostForP2P=true \
+		--useDevPrivilegeKeys=true \
+		--fullDaoNode=true \
+		--rpcUser=bisqdao \
+		--rpcPassword=bsq \
+		--rpcBlockNotificationPort=5120 \
+		--nodePort=2002 \
+		--userDataDir=.localnet \
+		--appName=seednode
+
+seednode2: seednode/build
+	./bisq-seednode \
+		--baseCurrencyNetwork=BTC_REGTEST \
+		--useLocalhostForP2P=true \
+		--useDevPrivilegeKeys=true \
+		--fullDaoNode=true \
+		--rpcUser=bisqdao \
+		--rpcPassword=bsq \
+		--rpcBlockNotificationPort=5121 \
+		--nodePort=3002 \
+		--userDataDir=.localnet \
+		--appName=seednode2
+
+mediator: desktop/build
+	./bisq-desktop \
+		--baseCurrencyNetwork=BTC_REGTEST \
+		--useLocalhostForP2P=true \
+		--useDevPrivilegeKeys=true \
+		--nodePort=4444 \
+		--appDataDir=.localnet/mediator \
+		--appName=Mediator
+
+alice: setup
+	./bisq-desktop \
+		--baseCurrencyNetwork=BTC_REGTEST \
+		--useLocalhostForP2P=true \
+		--useDevPrivilegeKeys=true \
+		--nodePort=5555 \
+		--fullDaoNode=true \
+		--rpcUser=bisqdao \
+		--rpcPassword=bsq \
+		--rpcBlockNotificationPort=5122 \
+		--genesisBlockHeight=111 \
+		--genesisTxId=30af0050040befd8af25068cc697e418e09c2d8ebd8d411d2240591b9ec203cf \
+		--appDataDir=.localnet/alice \
+		--appName=Alice
+
+bob: setup
+	./bisq-desktop \
+		--baseCurrencyNetwork=BTC_REGTEST \
+		--useLocalhostForP2P=true \
+		--useDevPrivilegeKeys=true \
+		--nodePort=6666 \
+		--appDataDir=.localnet/bob \
+		--appName=Bob
+
+# Generate a new block on your Bitcoin regtest network. Requires that
+# bitcoind is already running. See the `bitcoind` target above.
+block:
+	bitcoin-cli \
+		-regtest \
+		-rpcuser=bisqdao \
+		-rpcpassword=bsq \
+		getnewaddress \
+		| xargs bitcoin-cli \
+				-regtest \
+				-rpcuser=bisqdao \
+				-rpcpassword=bsq \
+				generatetoaddress 1
+
+.PHONY: build seednode